• 한국물환경학회지
• /
• 제28권6호
• /
• pp.933-942
• /
• 2012

The purpose of this study is to evaluate the degree of waterbody impairment according to the flow conditions and present to the appropriate water quality improvement alternatives using observed water quality and flow for Total Maximum Daily Load (TMDL) implementation at 39 unit watersheds the nakdong river basin. Observed water quality data for 7 years are divided into five cumulative flow frequency group and comparing the each observed water quality data and TMDL Target water quality (TWQ) the last evaluate the water quality is impaired group. We found that the cumulative flow frequency group-specific the average excess rate of V group was the highest (32.86%), followed by the IV group (26.04%), group III (23.36%), II group (22.67%), I group (20.70%), the degree of impaired waterbody tended to be inversely proportional to the flow rate. Resulted from cumulative flow frequency group of impaired water quality assessment, 13 unit watersheds are impaired from a group IV and group V affected by point sources. Therefore, improvement of sewage discharge and the initial composition of the riparian buffer zone are needed. Nakbon F, Namkang D and Namkang E within 13 unit watersheds are impaired from group II and III affected by non-point sources. Therefore, application of Best Management Practices (BMPs) is needed for these watersheds. Evaluation of impaired waterbody using Cumulative flow frequency group is able to determine the extent of the judgment to TWQ exceeded by the flow conditions and helps proper setting Standard flow and planning pollutant reduction for TMDL.

• 한국멀티미디어학회논문지
• /
• 제17권8호
• /
• pp.988-994
• /
• 2014

Software Defined Network (SDN) is a new technology in computer network area which enables user to centralize control plane. The security issue is important in computer network to protect system from attackers. SYN flooding attack is one of Distributed Denial of Service attack methods which are popular to degrade availability of targeted service on Internet. There are many methods to protect system from attackers, i.e. firewall and IDS. Even though firewall is designed to protect network system, but it cannot mitigate DDoS attack well because it is not designed to do so. To improve performance of DDOS mitigation we utilize another mechanism by using SDN technology such as OpenFlow and sFlow. The methodology of sFlow to detect attacker is by capturing and sum cumulative traffic from each agent to send to sFlow collector to analyze. When sFlow collector detect some traffics as attacker, OpenFlow controller will modify the rule in OpenFlow table to mitigate attacks by blocking attack traffic. Hence, by combining sum cumulative traffic use sFlow and blocking traffic use OpenFlow we can detect and mitigate SYN flooding attack quickly and cheaply.

• 한국건축시공학회지
• /
• 제4권4호
• /
• pp.135-142
• /
• 2004

The purpose of this study is to predict remodeling timing of Permanent Rental Housing through historic data and cash flow analysis. For this aim, the study has estimated cash flow of Permanent Rental Housing considering initial construction costs, government supporting fund, rental incomes and maintenance expenses. Based on the expected cash flow analysis, reasonable remodeling timing is predicted for Permanent Rental Housing. The results of this study are as follows: (1) it is analyzed that building a8e of about 27 years is the best time for remodeling because cumulative surplus amounts reach maximum level, (2) it is required that remodeling should be made before 34 years of age roughly because cumulative surplus amounts change into minus from this time.

• 한국농공학회논문집
• /
• 제60권6호
• /
• pp.97-109
• /
• 2018

The LDC (Load Duration Curve) method can analyze river water quality changes according to flow rate and seasonal conditions. It is also possible to visually recognize whether the target water quality is exceeded or the size of the reduction load. For this reason, it is used for the optimal reduction of TPLCs and analysis of the cause of water pollution. At this time, the flow duration curve should be representative of the water body hydrologic curve, but if not, the uncertainty of the interpretation becomes big because the damaged flow condition is changed. The purpose of this study is to estimate the daily mean flow of the unit watershed using the HSPF model and to analyze the difference of the flow duration curves according to the cumulative daily mean flow rate using the NSE technique. The results show that it is desirable to construct the flow duration curve by using the daily average flow rate of at least 5 years although there is a difference by unit watershed. However, this is the result of the water bodies at the end of Han River basin watershed, so further study on various water bodies will be necessary in the future.

• 한국환경과학회지
• /
• 제27권12호
• /
• pp.1179-1193
• /
• 2018

The purpose of this study at water quality pollutants to propose proper management method for the Osu-A unit watershed which is the influent tributary located upstream of the Sumjin -river among the 13 unit watersheds in the Sumjin-river water system. Analyzed the correlation between flow-pollution loading and the correlation between land use type, BOD and TP items, and analyzed 8-day intervals Cumulative Flow Duration Curve (CFDC) and Load Duration Curve (LDC) to evaluate water quality damage. As a result, both BOD and TP were larger than 1 and the concentration of water pollutants increased with increasing flow. BOD was positively correlated with Urban and Field, and TP was positively correlated with Field with 0.710. As a result of the LDC, BOD was analyzed that the target water quality was achieved with the excess rate of less than 50%, and TP exceeded the target water quality by 50.1%. BOD usually exceeded the standard value (exceedance probability 50%) at low flow zone and On the other hand, TP usually exceeded the standard value at high flow zone. Monthly BOD (April to June) and TP (May to August) exceeded the standard. Sewage Wastewater treatment and non-point pollution control is Osu-A unit watersheds are effective in improving BOD and TP.

• 산업경영시스템학회지
• /
• 제4권4호
• /
• pp.1-13
• /
• 1981

This paper analyses the efficiency of performance measures from the point of total cost on the accuracy of due date around various measures of performance be in mainly use in the flow shop scheduling theory. For this purpose, complete enumeration method for small problems seems to be the only possible means of evaluation and analysis. Using of the above technique, calculates the 800 Scheduling Problems, and represents it by the cumulative distributions.

• 경영정보학연구
• /
• 제13권1호
• /
• pp.61-74
• /
• 2011

소프트웨어 산업은 아직도 뿌리깊은 문제에 시달리고 있다. 어떻게 보면, 제조업과 같은 보다 성숙한 산업의 모범사례로부터 뭔가를 배워야 할 지 모른다. 제조업에서의 '린' 원칙을 소프트웨어 개발에 적용하는 것도 한 방안일 수 있다. 소프트웨어공학 문헌에서 이런 '린' 원칙은 시도해 볼만 한 것으로 언급되었다. 그러나 이들 원칙을 실제 어떻게 적용할 수 있을 가에 대한 구체적 방안을 제시한 연구는 별로 없었다 본 연구는 '린' 원칙을 소프트웨어 개발에 적용하는 방안을 제시하고자 한다. 이 방안의 핵심은 낭비제거라는 린의 관점을 구체화하기 위하여 프로젝트에서의 리드 타임과 결함을 누적 흐름도(Cumulative Flow Diagram)을 통해 관리하는 방법이다. 또한 이 방안을 실제 프로젝트 사례에 적용함으로써 타당성을 검증하고 적용 방법에 대한 이해를 돕고자 하였다.

• 한국분무공학회지
• /
• 제21권1호
• /
• pp.1-6
• /
• 2016

A gasoline injector rig which can measure cumulative injected fuel mass under a vehicle driving condition was developed. The measurement system consists of an engine control unit (ECU), data acquisition (DAQ) and injected fuel collection system using loadcells. By supplying reconstructed sensor signals which simulate the real vehicle's sensor signals to the ECU, the ECU drives injectors as if they were driven in the vehicle. The vehicle's performance was computer simulated by using $GT-Suite^{(R)}$ software based on both engine part load performance and automatic transmission shift map. Throttle valve position, engine and vehicle speed, air mass flow rate et al. were computer simulated. The used vehicle driving pattern for the simulation was FTP-75 mode. For reconstructing the real vehicle sensor signals which are correspondent to the $GT-Suite^{(R)}$ simulated vehicle's performance, the DAQ systems were used. The injected fuel was collected with mess cylinders. The collected fuel mass in the mess cylinder with elapsed time after starting FTP-75 driving mode was measured using loadcells. The developed method shows highly improved performance in fast timing and accuracy of the cumulative injected fuel mass measurement under the vehicle driven condition.

• 소성∙가공
• /
• 제20권4호
• /
• pp.296-302
• /
• 2011

The objective of this paper is to determine the effect of process parameters on the behavior of a 18Cr-10Mn-$0.44N_2$ nitrogen steel sample deformed by hot rolling. Compression tests were carried out at high temperatures to determine the flow stresses needed for a finite element(FE) analysis. The strain rate, ranging from 0.1 to $1.0s^{-1}$, significantly affected the flow stress at temperatures higher than $1,000^{\circ}C$. Non-isothermal rolling simulations and laboratory rolling tests were performed with plate specimens 14.5mm thick, 135mm wide and 226mm long. A rolling reduction of 15% per pass leading to a cumulative rolling reduction of 60% was determined as optimal. The extension ratio of 176.5% in the length direction was about 30.4 times greater than the extension ratio of 5.8% in the width direction. Isotropic properties for tensile strength, microstructure and grain size were measured after mock-up hot rolling tests. The results from the mockup tests were found to be in good agreement with those of the simulations.

• 터널과지하공간
• /
• 제27권5호
• /
• pp.324-332
• /
• 2017

본 연구에서는 암반 절리 내 점성유체 주입시 주입 설계변수가 주입 성능에 미치는 영향을 평가할 목적으로 UDEC 프로그램을 사용하여 1차원 선형유동 해석을 수행하였다. 주입 설계변수로는 주입 압력, 유체 압축률, 주입재의 항복강도 및 점성도의 시간의존성, 주입 압력에 의한 절리의 역학적 변형을 설정하였으며, 주입재의 침투거리 및 주입 유량을 통해 주입 성능을 평가하였다. 수치해석 결과는 이론해를 통하여 파악한 주입 성능양상과 유사한 결과를 보였다. 주입재의 항복강도 및 점성도의 시간의존성을 고려하지 않을 경우, 주입재의 누적 주입량은 시간의존성을 고려한 해석에 비하여 약 1.2배 크게 평가되었다. 또한, 수리-역학 연계해석결과로부터 주입 압력에 의한 절리의 역학적 변형이 발생하는 경우, 절리 간극이 일정한 수리유동 해석에 비하여 누적 주입량이 약 4.4배 늘어나는 결과를 보였다.