• Steel and Composite Structures
• /
• 제33권3호
• /
• pp.433-444
• /
• 2019

Fatigue failure of a grid structure using bolt-sphere joints is liable to occur in a high-strength bolt due to the alternating and reciprocal actions of a suspension crane. In this study, variable amplitude fatigue tests were carried out on 20 40 Cr steel alloy M30 high-strength bolts using an MTS fatigue testing machine, and four cyclic stress amplitude loading patterns, Low-High, High-Low, Low-High-Low, and High-Low-High, were tested. The scanning electron microscope images of bolt fatigue failure due to variable amplitude stress were obtained, and the fractographic analysis of fatigue fractures was performed to investigate the fatigue failure mechanisms. Based on the available data from the constant amplitude fatigue tests, the variable amplitude fatigue life of an M30 high-strength bolt in a bolt-sphere joint was estimated using both Miner's rule and the Corten-Dolan model. Since both cumulative damage models gave similar predictions, Miner's rule is suggested for estimating the variable-amplitude fatigue life of M30 high-strength bolts in a grid structure with bolt-sphere joints; the S-N fatigue curve of the M30 high-strength bolts under variable amplitude loading was derived using equivalent stress amplitude as a design parameter.

• Journal of Advanced Marine Engineering and Technology
• /
• 제21권5호
• /
• pp.542-548
• /
• 1997

In this study an evaluation method of fatigue strength of membrane type LNG tank is presented with FEM analysis and experimental approach of seam and raised edge welds. The study contains the following : l)FEM analysis of test specimens 2)Fatigue tests of seam and raised edge welds 3)Estimation of cumulative damage factor of the welds on the basis of safe life design concept complying with the rules of classification society 4)Review of the effect of mean stress on the fatigue strength 5)Modelling of fatigue life of the welds which is changeable by weld heights With the results obtained in this study, a model ${\Delta}{\delta}/h^2=0.13553\;{N_{f}}^{-0.3151}$ for seam and raised edge welds having a given weld height is proposed to be useful for designers and inspectors.

• Nuclear Engineering and Technology
• /
• 제44권6호
• /
• pp.683-688
• /
• 2012

The structural integrity of mechanical components during several transients should be assured in the design stage. This requires a fatigue analysis including thermal and stress analyses. As an example, this study performs a fatigue analysis of the reactor pressure vessel of SMART during arbitrary transients. Using heat transfer coefficients determined based on the operating environments, a transient thermal analysis is performed and the results are applied to a finite element model along with the pressure to calculate the stresses. The total stress intensity range and cumulative fatigue usage factor are investigated to determine the adequacy of the design.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2008년도 정기총회 및 학술발표대회
• /
• pp.317-320
• /
• 2008

Between traffic-induced vibration of a bridge and fatigue damage of its attached structures are very closely related. But any evaluation and design method considering the fatigue damage is not established yet. As an experimental method of evaluation of the fatigue durability, a method based on cumulative damage using a stress range histogram has been often used. However, to use the method, the fatigue durability of unmeasured points could not be evaluated. Then, in this paper, dynamic analysis of a sign frame on a bridge is carried out based on the vibration data of the bridge. And model optimization was performed for good agreement between measured responses and computed responses. As a result, we could get stress range histograms and calculate fatigue durability of unmeasured points.

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권6호
• /
• pp.993-999
• /
• 2004

The estimation of fatigue life at the design stage of membrane type LNG tank is very important in order to arrive at feasible and cost effective solutions considering the total lifetime of the tank. In this study, the practical procedure of fatigue life prediction by use of cumulative damage factors based on Miner-Palmgren hypothesis and probability density function has been shown with the corner region of Gaz Transport Membrane type LNG tank being used as an example. In particular the parameters of Weibull distribution that determine the stress spectrum are discussed. The main results obtained from this study are as follows: 1. The recommended value for the shape parameter of Weibull distribution for the LNG tank is 1.1 in case of using the direct calculation method proposed in this study. 2. The calculated fatigue life is influenced by the shape parameter of Weibull distribution and stress block. The safe fatigue design can be achieved by using higher value of shape parameter and the stress blocks divided into more stress blocks.

• 한국산학기술학회논문지
• /
• 제12권2호
• /
• pp.594-599
• /
• 2011

본 논문은 마그네슘합금 AZ31의 피로파손수명의 확률론적 특성과 신뢰성에 미치는 경계조건의 영향을 평가하였다. 경계조건으로 시편두께와 응력비 그리고 최대피로하중을 적용하였으며, 각 경계조건별로 세부 실험조건에 대한 피로균열전파실험을 수행하여 피로파손수명에 대한 통계 데이터를 획득하였다. 마그네슘합금의 피로파손수명의 통계적 해석을 위하여 3-모수 와이블분포를 사용하였다. 시편두께가 두꺼울수록, 응력비가 클수록, 그리고 최대피로하중이 작을수록 통계적 피로파손수명이 길게 나타났다. 반면에 시편두께가 얇을수록, 응력비가 작을수록, 그리고 최대피로하중이 클수록 신뢰성이 급격히 감소하였다.

• 한국산업정보학회논문지
• /
• 제6권3호
• /
• pp.79-86
• /
• 2001

신종 직업병 중 누적외상성질환(Cumulative Trauma Disorders)은 고도로 분업화된 현대 산업환경에서 주로 수작업을 수행하는 종사자에게 발생된다. 본 연구는 단순반복근로자의 누적외상성질환에 노출되는 정도를 EMG시스템을 이용하여 분석한 결과는 다음과 같다. AEMG에서는 작업경과에 따라 근피로도는 증가하다가 작업 완료시에는 근피로도가 내화벽돌을 들기 전보다 감소하였다. MF와 MPF에에서는 천극근, 다열근의 근피로도가 많은 것으로 나타났다. ZCR에서는 모든 내화벽돌의 무게에서 작업전과 작업후의 근피로도가 가장 낮게 나타났다. 종합적으로 작업진행이 계속됨에 따라 근육피로도는 증가하고 있었고, 단순반복운반작업시에 천극근과 다열관에 대한 근피로도가 큰 것으로 나타났다.

• 대한토목학회논문집
• /
• 제6권4호
• /
• pp.79-88
• /
• 1986

본(本) 논문(論文)에서는 크기가 변(變)하는 변동진폭(變動振幅)의 반복하중이 콘크리트구조물(構造物)에 작용(作用)할 경우 피로파괴를 예측할 수 있는 비선형누적손상이론(非線型累積損傷理論)을 제안(提案)하였다. 이를 위하여 콘크리트보에 대한 피로실험이 수행되었으며, 피로하중은 2단계 및 3단계로 크기가 증가하는 경우와 감소하는 경우가 모두 고려되었다. 본(本) 연구(硏究)의 실험결과(實驗結果) 변동진폭(變動振幅)의 반복하중을 받는 콘크리트에 발생하는 누적손상은 피로하중의 크기와 피로하중의 작용순서에 따라 많은 영향을 받는 것으로 나타났으며, 따라서 Palmgren-Miner의 선형손상이론이 콘크리트의 경우 적합하지 않음을 보여주고 있다. 피로하중이 점진적으로 증가하는 경우 Miner의 손상합(損傷合)은 1 보다 크며, 피로하중이 점진적으로 감소하는 경우 이 손상합은 1 보다 작은 것으로 나타났다. 본(本) 논문(論文)에서 제안(提案)된 비선형(非線型) 누적손상이론(累積損傷理論)을 피로하중의 크기와 작용순서의 영향을 고려할 수 있는 보다 진보(進步)된 손상이론으로서, 콘크리트 구조용의 피로해석 및 설계에 있어 하나의 토대가 될 것으로 사료된다.

• 대한기계학회논문집
• /
• 제12권4호
• /
• pp.790-805
• /
• 1988

본 연구에서는 유리섬유 강화 에폭시 복합재료의 파괴 강도와 피로 수명을 정 규분포, 로그 정규 분포와 2모수 및 3모수 Weibull 분포 함수의 기대값으로 살펴 보았 다. 2연속 응력 피로 실험 [작은 응력에서 큰 응력으로의 실험(low-high test), 큰 응력에서 작은 응력으로의 실험(high-low test)]의 결과도 분포 함수들을 사용하여 분 석하였다. 비통계학적 누적 손상 법칙들(non-statistical cumulative damage rules) 을 2연속 응력 피로 수명 분산 예측에 이용하기 위해서 동등 순위 가정(equal rank assumption)을 확장하여 수정하였다. 수정한 누적 손상 모형은 Miner의 법칙, Brou- tman과 Sahu의 손상모형 및 Hashin과 Rotem의 모형 등이다.

• 한국안전학회지
• /
• 제15권1호
• /
• pp.153-160
• /
• 2000

Occupational cumulative traumas (CTDs) are becoming one of leading ailments in industrialized worl $d^{(1.2)}$. The degree of muscle fatigue is important parameter to understand cause of occupational cumulative trauma disorders. To quantify degree of muscle fatigue, muscle EMG activity was measured during isometric and dynamic contractions(repetitive concentric/eccentric muscle contraction) and its analyzed data, such as RMS, median frequency, and median power were compared when the muscle was fresh and exhausted. When muscle become fatigue, it was observed that median frequency decreased and median power and RMS increased However, based on overall prolonged observation, median frequency increased and median power and RMS decreased. Therefore it was concluded that shifting patterns of RMS, median frequency, and median power values can be used as parameter to evaluate degree of muscle fatigue even in dynamic muscle contraction.