• 센서학회지
• /
• 제31권3호
• /
• pp.180-186
• /
• 2022

Photosynthetically active radiation flux density (PPFD) and daily light integral (DLI) values related to plant photosynthesis were obtained using the sunlight time and insolation data points in the agricultural weather sensor data for Jinan-gun, Jeollabuk-do, Korea from 2016 to 2020. The objective was to optimize the photo-environmental conditions for cultivating ginseng. The range of average monthly sunshine duration was 395.5-664.1 min, with the longest duration observed in June. The range of average annual accumulated daily insolation was 11.98-17.65 MJ·m^-2. The range of average daily external DLI calculated from the insolation and solar time data was 22.3-36.1 mol·m^-2·d^-1, and the annual cumulative DLI was 8,156-13,175 mol·m^-2·d^-1. Both the insolation and DLI values were the highest in 2016 and lowest in 2020. Based on the PPFD required for ginseng growth (111-185 µmol·m^-2·s^-1), the monthly average daily DLI and monthly cumulative DLI were 3.51-5.87 and 82-228 mol·m^-2·d^-1, respectively. The range of five-year average value for the external monthly cumulative DLI was 298-1,459 mol·m^-2·d^-1, and the monthly cumulative DLI values when a black double shading film and blue-white shading film were applied were 101-496 and 36-175 mol·m^-2·d^-1, respectively. A comparative analysis of DLI values indicated that shading was required to ginseng growth throughout the year under natural light. When the black double shading film was used, shading was required from March to October. When the blue-white shading film was applied from April to August, (i.e., the period with active ginseng growth) the appropriate DLI for ginseng growth could be continuously maintained. Regional weather differences due to climate change are gradually increasing, and even in one region, monthly and cumulative DLI values are different every year. Therefore, in order to implement a precise agricultural environment for ginseng cultivation, precise analysis and continuous research using agricultural weather sensor big data is required.

• Safety and Health at Work
• /
• 제4권2호
• /
• pp.105-110
• /
• 2013

Background: To determine the influence of lifting speed and type on peak and cumulative back compressive force (BCF) and shoulder moment (SM) loads during symmetric lifting. Another aim of the study was to compare static and dynamic lifting models. Methods: Ten male participants performed a floor-to-shoulder, floor-to-waist, and waist-to-shoulder lift at three different speeds [slow (0.34 m/s), medium (0.44 m/s), and fast (0.64 m/s)], and with two different loads [light (2.25 kg) and heavy (9 kg)]. Two-dimensional kinematics and kinetics were determined. A three-way repeated measures analysis of variance was used to calculate peak and cumulative loading of BCF and SM for light and heavy loads. Results: Peak BCF was significantly different between slow and fast lifting speeds (p < 0.001), with a mean difference of 20% between fast and slow lifts. The cumulative loading of BCF and SM was significantly different between fast and slow lifting speeds (p < 0.001), with mean differences ${\geq}80%$. Conclusion: Based on peak values, BCF is highest for fast speeds, but the BCF cumulative loading is highest for slow speeds, with the largest difference between fast and slow lifts. This may imply that a slow lifting speed is at least as hazardous as a fast lifting speed. It is important to consider the duration of lift when determining risks for back and shoulder injuries due to lifting and that peak values alone are likely not sufficient.

• 한국산업보건학회지
• /
• 제11권1호
• /
• pp.85-91
• /
• 2001

Background : It goes without saying that cumulative trauma disorders is spreading to various types of occupation in many advanced countries including America, and it forms considerable rate of total occupational disorders already. and as the result of it, the seriousness of worker health problem and economic loss owing to production loss, recuperation expense, etc. are on the increasing trend through whole society. In case of Korea, the related measures as well as accurate fact-finding survey data on cumulative trauma disorders aren't prepared in detail, so it implies forward problem would be serious. Purpose : The purpose of this study is to draw the risk factor of cumulative trauma disorders in production factory, to forecast the rate of occurrence of cumulative trauma disorders on the basis of subjective symptoms, and to present forward realistic and effective prevention measures by showing the risk of cumulative trauma disorders, objecting the production factory of a domestic riding automobile assembly shop, by estimating in the aspect of human-engineering through the analysis of risk factor being a cause of cumulative trauma disorders. Methods : For this study, I investigated work type and on-duty hours, breathing time, and subjective symptoms of cumulative trauma disorders through questionnaire, objecting the workers in press. car body, coating, and outfit factory. Results : As a result of research, 81.2% of workers were in the physical burden due to present working, and the highest prevalence by part of body is an waist. The higher a rule score, The higher the number of workers complaind for working intensity, and the higher age work duration, tool used time, the higher prevalence of subjective symptoms by part of body. The number of workers complaind subjective symptom for treatment is the highest in drugstore.

• 한국산업보건학회지
• /
• 제8권1호
• /
• pp.36-49
• /
• 1998

The purpose of this study is to investigate the relationship between the work postures and upper extremity cumulative trauma disorders(CTDs) in female medical insurance bill reviewers(n=448). This study included diagnosis for CTDs, anthropometry and job analysis (workstations and posture). The characteristics of subject were 33.6 years of average age and 8.7 years of average work duration. The results were as fallows. Ergonomic conditions of workstation were unsuitable compared with anthropometry result. The height of work surface(79.5 cm) and chair(43.0 cm)were high. work space was small, and legs space under the table was limited. Work postures were awkward compared with recommended neutral postures. Neck flexion($21.0-36.0^{\circ}$), elbow elevation, shoulder abduction ($46.0-47.0^{\circ}$). wrist radial and ulnar deviation, forearm supination and pronation, and wrist repeated motion(12.7-21.5 freq./min) were analyzed as hazardous risk factors by job analysis. The prevalence of CTDs was 32.8 % by medical diagnosis. The prevalence rate of CTDs in hazardous work posture group was significantly greater than safe work posture group both neck-shoulder (relative prevalence = 5.2, p<0.001) and wrist-hand (relative prevalence = 2.5, p<0.05).

• 한국작물학회지
• /
• 제63권2호
• /
• pp.120-130
• /
• 2018

Improvement in rice grain yield has been approached by means of genetic amendment, cultural management, and environmental adaptation. Subjecting the plant during the grain filling period to an appropriate environment plays a key role in achieving a high grain yield in temperate rice. Field experiments were conducted for two consecutive years with two planting times to assess the relations among grain filling traits, loss of leaf activity during the ripening period, and the grain yield of temperate japonica rice with wide environmental variation. Higher grain yields were attained in 2017 than in 2016 and with late planting than with early planting. The high grain yield accompanied a comparatively lesser increase in grain weight at the early filling stage but more gain in grain weight occurred during the late filling stage. Final grain weight correlated positively with grain filling duration but negatively with grain filling rate. Extended grain filling duration was associated with higher cumulative temperature and cumulative solar radiation for an effective grain filling period. The reduction in SPAD value ${\times}$ leaf dry weight from heading to harvest significantly correlated with final grain dry weight in a positive manner. No significant relation was found between grain filling duration and the decrease in SPAD value ${\times}$ leaf dry weight during the grain filling period. The results suggest that grain filling duration and loss of leaf activity during ripening independently contribute to environmentally induced yield improvement in temperate japonica rice.

• 한국지진공학회논문집
• /
• 제3권3호
• /
• pp.33-44
• /
• 1999

지진의 시간적인 요인, 즉 반복하중효과와 이에 따른 누적소성변위를 고려하기 위하여 에너지 평형에 근거한 해석방법이 개발되었다 본 논문에서는 내진 설계되지 않은 골조 기둥의 파괴유형에 주목하고자 한다. 이를 위하여 기둥의 휨강도저감모델이 제안되는데 파괴유형별로는 콘크리트에의한 파괴 주근의 부착/정착강도 파괴 및 저사이클피로에 의한 주근의 파단등을 고려하였다 에너지에 근거한 모델에 의하여 예측된 응답과 실험결과를 비교하였으며 이론과 실험간의 응답과 파괴유형이 서로 매우 가까움을 확인하였다.

• 한국수소및신에너지학회논문집
• /
• 제14권1호
• /
• pp.61-68
• /
• 2003

This paper presents the methodology to analyze flow duration characteristics and performance prediction technique for small hydro power(SHP) Plants and its application. The flow duration curve can be decided by using monthly rainfall data at the most of the SHP sites with no useful hydrological data. It was proved that the monthly rainfall data can be characterized by using the cumulative density function of Weibull distribution and Thiessen method were adopted to decide flow duration curve at SHP plants. And, the performance prediction technique has been studied and development. One SHP plant was selected and performance characteristics was analyzed by using the developed technique, Primary design specfications such as design flowrate, plant capacity, operational rate and annual electricity production for the SHP plant were estimated, It was found that the methodology developed in this study can be a useful tool to predict the performance of SHP plants and candidate sites in Korea.

• 한국지반환경공학회 논문집
• /
• 제8권2호
• /
• pp.11-18
• /
• 2007

철도 연변 사면의 활동은 열차 노선의 사용성과 안전성에 상당한 영향을 미치고 있다. 따라서 사면안정 문제는 철도 노선 운용에 있어 큰 관심사항이다. 본 연구에서는 철도연변 사면의 활동이 발생하는 조건에서의 강우정보를 분석하였으며 침투해석과 한계평형해석을 통하여 강우를 고려한 사면의 안정성 분석 기법을 제시하고자 한다. 강우량 분석결과 사면활동이 발생하기까지 누적강우량은 150~500mm 사이에 분포하고 있었고 강우지속시간은 3~24시간으로 나타났다. 분석된 강우량을 바탕으로 무한사면 조건에서의 침투해석과 강체거동 분석을 수행하고 무한사면의 심도는 2m를 가정하였으며 다중의 파괴면은 2m 심도로부터 16.7cm 간격으로 모델링이 되었다. 한계파괴심도인 2m는 안전율이 수렴하는 심도이다. 해석결과 기존의 사면안정성 평가 기준에서 고려하고 있는 우기시 해석조건의 결과보다 현실적인 안전율을 보였다. 또한 누적강우량, 강우지속시간, 안전율을 축으로 하는 3차원 공간상에 안전율 변화 추이를 도시한 결과 강우를 고려한 사면의 안전성 분석 시 일반적으로 고려하는 강우강도 뿐만 아니라 누적강우량(강우지속시간) 또한 고려되어야 할 것으로 판단되었다.

• 대한토목학회논문집
• /
• 제28권4B호
• /
• pp.363-374
• /
• 2008

국내에서 수공구조물의 설계를 위한 확률강우량을 산정하기 위해서 널리 사용되는 강우강도식은 주로 회귀분석을 적용한 형태가 일반적이지만, 본 연구에서는 각 지점별 적정확률분포형의 누가분포함수를 활용하여 강우강도식의 형태를 결정하고, 매개변수는 유전자알고리즘을 적용하여 추정하는 강우강도식을 제안하고자 한다. 기존에 사용하던 강우강도식과의 정확도 비교를 위하여 기상청 22개 지점에 대한 재현기간, 지속기간별 평균제곱근오차, 평균제곱근 상대오차를 검토한 결과 누가분포함수를 활용한 강우강도식이 더 높은 정확도를 가짐을 보였으며, 또한, 최근의 집중호우에 대한 영향을 살펴보기 위하여 2006년 까지의 강우자료를 이용하여 기존의 회귀식에 의한 방법과 누가분포함수를 활용한 경우의 결과값을 비교한 결과 이 경우에도 누가분포함수를 활용한 강우강도식의 정확도가 더 높음을 알 수 있었다. 결과적으로 본 연구에서 제안된 누가분포함수를 활용한 강우강도식은 기존의 회귀분석을 활용한 강우강도식보다 정확도면에서 우수하다고 할 수 있으며, 국내에 충분히 적용가능한 형태의 강우강도식이라고 판단된다.

• 한국방재학회 논문집
• /
• 제6권3호
• /
• pp.57-68
• /
• 2006

본 연구에서는 강우의 수문학적 특성을 고려하여 단시간강우의 시간분포를 분석하고, Huff의 무차원 누가곡선을 제시하였으며, 강우의 수문학적 특성은 지속기간, 강우의 발생원인(장마, 태풍, 집중호우, 전선형강우), 구간변화 등으로 분류하였다. 본 연구의 수행으로 인해 얻어진 결과를 요약하면 다음과 같다. 첫째, 국내 도시지역의 단시간 강우의 최대강우강도는 전방위구간에서 발생할 확률이 가장 높게 나타났으며, 둘째, 강우발생원인별 분류에서도 전반적으로 전방위구간에서 최대강우강도가 발생하였으나 태풍의 경우에는 후방위구간에서 최대강우강도가 발생하였다. 셋째, Huff의 6구간 분석에서는 동일한 위치에 해당되는 제2구간에서 우세하였다. 넷째, 전기간 강우자료를 이용한 기존 연구들의 무차원 누가곡선 및 특성변수와의 비교를 실시하여, 수문학적 특성에 따라 무차원 누가곡선의 위치 및 특성변수의 값에서 차이가 발생한다는 것을 알 수 있었다.