• Korean Journal of Materials Research
• /
• v.8 no.10
• /
• pp.898-904
• /
• 1998

Ni-W alloys containing 10 to 50wt% W were prepared by electrodeposition. Tungsten content in the alloy increased with current density. X-ray diffraction analysis revealed that the alloy was crystalline phase when deposited at current densities lower than 50mA/${cm}^2$. Their crystal structure transformed to amorphous at higher current densities. In terms of tungsten content, the crystal -+ amorphous transition occurred at 40-46wt% which was identified by the 3 fold increase in the width of a diffraction peak. The lattice parameter of crystalline phase increased with W upto 40wt% which is higher than the solubility limit of W (about 30wt%) in Ni. Therefore, the alloys are considered to be Ni solid solution supersaturated with W. The amorphous Ni-W alloys were recrystallized by annealing them at temperatures over $400^{\circ}C$. This was evidenced by the appearance a strong [ 11 11 annealing texture. The supersaturated W was precipitated during the annealing at over $800^{\circ}C$. The current-density dependence of W content and crystallinity was utilized to produce alternating layers of crystalline (30wt% W) and amorphous (50wt%) phases which may exhibit unique mechanical and corrosion properties.

• Progress in Superconductivity and Cryogenics
• /
• v.5 no.3
• /
• pp.23-25
• /
• 2003

Effect of chemically modified precursor solution on YBCO coated conductor prepared by MOD-TFA method was investigated. YBCO thin films were deposited on (l00)-oriented single crystalline LaAlO$_3$ substrates by conventional MOD-TFA process. The microstructures of YBCO thin films contain maze-like patterns. The origin of this microstructure was delineated by compositional inhomogeneity during the pyrolysis process and it was shown that addition of diethanolamine (DEA) improve the microstructure of grown YBCO films. In addition, it was demonstrated that the chemical modification of precursor solution makes no harmful effect on biaxial texture of YBCO thin films.

• Textile Coloration and Finishing
• /
• v.2 no.4
• /
• pp.237-244
• /
• 1990

Syntheses and liquid-Crystallinites of thermotropic copoly (ester amide)s were investigated. The three components melt polycondensation of 4,4'-dicarboxy-$\alpha$, $\omega$-diphenoxyalkane as an A component, 4-4'diacetoxybiphenyl as a B, and p-N-acetoxy-aminobenzoic acid as a C gave the thrmotropic copoly(ester amide)s containing a flexible splacer in the polymer backbone. Diacetylated hydroquinone, methyl hydroquinone, chlorohydroquinone, and phenyl hydroquinone were used as anther B components. A polymer(6BPAB) having 10 mol% of C component and hexamethylene space. showed a typical nematic texture between $245^{\circ}C(T_m)\; and\; more\; than\; 360^{\circ]C(T_i)$. The melting points of the members of this series of polymers increased with decreasing methylene spacer. The polymer structure and mesomorphic nature were examined by solid and solution ^{13}C-NMR4 spectroscopy, cross polarizing microscopy with a hot stage, and X-ray diffactometry.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.05a
• /
• pp.120-126
• /
• 2003

Finite element analysis model is suggested for analysis of milli-forming process, which forms milli-size products. Since the size of workpiece in a milli-forming process ranges from a few hundred micrometers to a few millimeters, microstructural changes such as the growth of micro-voids and the development of preferred orientation in a grain become crucial factors for the success of milli-forming. This analysis model incorporates anisotropy from deformation torture and deterioration of mechanical properties due to the growth of micro-voids. Applications of the proposed modeling to milli-forming are given and the results are carefully examined to understand the deformation characteristics such as texture development and damage evolution during extrusion/drawing of a milli-bar.

• Progress in Superconductivity
• /
• v.5 no.1
• /
• pp.84-87
• /
• 2003

$YBa_2$$Cu_3$$O_{7-x}$ (YBCO) thin films were fabricated by MOD-TFA process via dip-coating method on LaAlO$_3$, (LAO) single crystalline substrates. In this study, we investigated effect of annealing temperature and solvent on the microstructure and texture of YBCO thin films. The precursor films were annealed at various temperature to improve surface morphologies and phase purities. It was shown that the films annealed at relatively lower and higher temperature exhibit low phase purity and crystallinity. The effect of various solvents on surface morphologies and second phase has been investigated.

• Textile Coloration and Finishing
• /
• v.5 no.2
• /
• pp.109-116
• /
• 1993

Synthesis and liquid-crystallinites of thermotropic polyamides and copolyamides were investigated. Thermotropic polyamides and copolyamides containing a flexible spacer in the backbone were obtained by the two or three components melt polycondensations of 4,4'-dicarboxy-${\alpha}$${\omega}$-diphenoxy alkane as an A components, 4,4'-diacetoamido-3,3' dimethoxybiphenyl as a B, 1,4-diacetoamido-benzene (diacetylated p-phenylenediamine) was used as another amide-group-forming minomer. The content of the amide groups in the thermotropic polyamide and Copolyamide widely varied depending on the structure of the amide-group forming diacetoamido monomers. A polymer (9CLDI) showed a typical nematic texture between 218$^{circle}C$ ($T_m$) and 345$^{circle}C$($T_i$) The melting points of the members of this series of polymers increased with decreasing methylene spacer. The polymer structure and mesmorphic nature were examined by solid and solution ${^13}C$-NMR spectroscopy, cross polarizing microscopy with a hot stage.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2004.06a
• /
• pp.64-65
• /
• 2004

• Carbon letters
• /
• v.4 no.1
• /
• pp.24-30
• /
• 2003

In this study, densified 4D carbon/carbon composites were made from carbon fiber and coal tar pitch through the process of pressure impregnation and carbonization and then followed by carbonization and graphitization. To improve the oxidative resistance of the prepared carbon/carbon composites, the surface of carbon/carbon composites was coated on SiC by the pack cementation method. The SiC coated layer was created by depending on the constitution of pack powder, and reaction time of pack-cementation. The morpology of crystalline and texture of these SiC coated carbon/carbon composites were investigated by XRD, SEM/EDS observation. So the coating mechanism of pack-cementation process was proposed. The oxidative res istance were observed through the air oxidation test, and then the optimal condition of pack cementation was found by them. Besides, the oxidative mechanism of SiC formed was proposed through the observation of SiC coated surface, which was undergone by oxidation test.

• Journal of the Korean Ceramic Society
• /
• v.53 no.5
• /
• pp.535-540
• /
• 2016

Effects of compositions and sintering conditions on glaze properties are shown in the diagram constructed by using the unity molecular formula (UMF) method in this study. Glossy characteristics of glaze were clearly differentiated by compositional area in the diagram and sintering process. As alumina and silica contents were increased, texture of the glaze became rough and opaque, akin to having been devitrified or underfired. The correlation between glossiness and surface roughness was found to be non-linear and inversely proportionate. Crystalline phases formed in the glaze were also influenced by the compositional area. Due to the high concentration of CaO, anorthite and wollastonite were formed depending on the compositions. Hardness was increased with an increase of alumina and silica concentrations in the glaze.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2001.11a
• /
• pp.10-10
• /
• 2001

In this paper, initial depositing process of electroless Ni-Cu-P alloy was investigated by means of SEM, TEM and AES. The results show that the initial deposition is inhomogeneous and there exist different transition layers between different coatings and substrates, which are decided by the structures and compositions of the bath. For Ni-P binary alloy, its deposition takes place superiorly at grain boundary and on some grains with beneficial texture, the thickness of transition layer composed of Ni-Fe-P reaches 2000 angstrom. But during initiation of Ni-Cu-P trinary alloy, only at grain boundary is prIor to be deposited electrolessly, transited layer contains Ni-Fe-Cu-P and is decreased to about 500 angstrom. The structures of the films of Ni-P and Ni-Cu-P are crystalline at the initial depositing stage. The mechanisms of the process are put forward in this paper.