• Polymer(Korea)
• /
• 제39권2호
• /
• pp.323-328
• /
• 2015

Poly(${\varepsilon}$-caprolactone) (PCL) nanofibers and PCL/silica membranes were synthesized by sol-gel derived electrospinning and casting, respectively. Smooth PCL nanofibers were obtained from the precursor containing N,N-dimethylformamide (DMF). PCL/silica membranes were prepared by varying the tetraethyl orthosilicate (TEOS) contents from 0 to 40 vol% to investigate the effect of silica addition on mechanical properties and cytotoxicity of the membranes. Although the strength of the membranes decreased from 12 to 8 MPa with increasing the silica content, the strength remained almost constant 7 weeks after dipping in phosphate buffered saline solution (PBS). The strength reduction was attributed to the presence of a patterned surface pores and micro-pores present in the walls between pores. The crystal structure of the membranes was orthorhombic and the crystallite size decreased from 57 to 18 nm with increasing the silica content. From the agar overlay test, the PCL/silica membranes exhibited neither deformation and discoloration nor lysis of L-929 fibroblast cells.

• Journal of the Microelectronics and Packaging Society
• /
• 제30권2호
• /
• pp.71-75
• /
• 2023

In this study, inorganic perovskite films with different compositions were grown by thermal chemical vapor deposition depending on the substrate and their optical properties were compared. Inorganic perovskite crystals were grown on SiO₂/Si and c-Al₂O₃ substrates using CsBr and PbBr₂, respectively, under the same growth conditions. Cs₄PbBr₆-CsPbBr₃ crystallites were grown on the SiO₂ with polycrystalline structure, while a CsPbBr₃ (100) dominant thin film was formed on the c-Al₂O₃ substrate with single crystal structure. From the photoluminescence measurement, CsPbBr₃ showed typical green emission centered at 534 nm with a full width at half maximum (FWHM) of about 91 meV. The Cs₄PbBr₆-CsPbBr₃ mixed structure exhibits blue-shifted emission at 523 nm with a narrow FWHM of 63 meV and a fast decay time of 6.88 ns. These results are expected to be useful for application in photoelectric devices such as displays, solar cells, and light sensors based on inorganic metal perovskites.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• 제50권1호
• /
• pp.1-10
• /
• 2024

In this study, a quercetin benton gel (QUERPLEX) that stabilized quercetin was prepared using organo hectorite, and its efficacy was confirmed. In addition, a comparative study was conducted on the stability and effectiveness of applying this to sunscreen cosmetics. It was confirmed that QUERPLEX remained stable without showing crystal precipitation and growth for 4 weeks. As a result of measuring antioxidant activity using 2,2-diphenyl-1-picrylhydrazyl (DPPH), it showed antioxidant activity depending on the concentration, and showed a radical elimination ability of 70% or more at a concentration of 2,500 ppm or more, confirming a significant effect. Anti-inflammatory activity experiments using RAW 264.7 cells confirmed that NO production decreased in a concentration-dependent manner by reducing NO production by 8% at 25 ㎍/mL, 23% at 50 ㎍/mL, and 84% at 100 ㎍/mL. As a result of confirming the stability of the formulation according to the method of quercetin in the sunscreen formulation, the stability of the formulation was improved when quercetin was added directly to the formulation. It also improved the UV protection index on in vitro and in vivo, which is expected to have the potential as a component that can have a new boosting effect on UV protection. These results suggest that organo hectorite is very effective as a quercetin carrier and that it can be applied in cosmetic formulations by not only expressing the efficacy of quercetin but also bringing about additional effects.

• Journal of the Korean Society of Food Science and Nutrition
• /
• 제46권8호
• /
• pp.1012-1017
• /
• 2017

Mesembryanthemum crystallinum (Family: Aizoaceae) is an annual plant consisting of ice crystal-shaped bladder cells, which is responsible for its common name ice plant. This study investigated biological activities according to general components and extraction solvent in order to examine the functionality of ice plant. The total content of free amino acids was 32.57 mg/g, including 4.64 mg/g of L-alanine as the most abundant and 2.60 mg/g of ${\gamma}$-aminobutyric acid. Regarding angiotensin converting enzyme inhibitory activities of solvent fractions of ice plant, ethyl acetate fraction and chloroform fraction showed activities of $33.17{\pm}3.20{\sim}88.19{\pm}3.20%$ and $23.72{\pm}2.89{\sim}86.78{\pm}2.24%$, respectively, similar to $Captopril^{(R)}$ ($19.51{\pm}3.44{\sim}84.72{\pm}1.06%$) and $Enalapril^{(R)}$ ($24.93{\pm}1.12{\sim}91.32{\pm}3.62%$) as positive control groups. Regarding inhibition of lipid droplet production in 3T3-L1 preadipocytes by ice plant, anti-adipogenic activities were $53.00{\pm}0.45{\sim}65.75{\pm}0.31%$ and $44.16{\pm}0.29{\sim}63.32{\pm}0.36%$ in the ethyl acetate fraction and butanol fraction, respectively, showing the lowest lipid droplet production. The chloroform fraction and hexane fraction showed activities of $38.33{\pm}0.09{\sim}56.55{\pm}0.50%$ and $31.17{\pm}0.50{\sim}55.10{\pm}1.93%$, respectively, whereas the water fraction showed activity of $26.32{\pm}2.27{\sim}49.48{\pm}0.05%$. Therefore, all solvent fractions inhibited fat accumulation of 3T3-L1 preadipocytes according to treatment concentration. According to the results above, it would be possible to utilize ice plant as a new health functional material.

• Asian Pacific Journal of Cancer Prevention
• /
• 제15권2호
• /
• pp.929-935
• /
• 2014

Two types of nanosized titanium dioxide, anatase ($anTiO_2$) and rutile ($rnTiO_2$), are widely used in industry, commercial products and biosystems. $TiO_2$ has been evaluated as a Group 2B carcinogen. Previous reports indicated that $anTiO_2$ is less toxic than $rnTiO_2$, however, under ultraviolet irradiation $anTiO_2$ is more toxic than $rnTiO_2$ in vitro because of differences in their crystal structures. In the present study, we compared the in vivo and in vitro toxic effects induced by $anTiO_2$ and $rnTiO_2$. Female SD rats were treated with $500{\mu}g/ml$ of $anTiO_2$ or $rnTiO_2$ suspensions by intra-pulmonary spraying 8 times over a two week period. In the lung, treatment with $anTiO_2$ or $rnTiO_2$ increased alveolar macrophage numbers and levels of 8-hydroxydeoxyguanosine (8-OHdG); these increases tended to be lower in the $anTiO_2$ treated group compared to the $rnTiO_2$ treated group. Expression of $MIP1{\alpha}$ mRNA and protein in lung tissues treated with $anTiO_2$ and $rnTiO_2$ was also significantly up-regulated, with $MIP1{\alpha}$ mRNA and protein expression significantly lower in the $anTiO_2$ group than in the $rnTiO_2$ group. In cell culture of primary alveolar macrophages (PAM) treated with $anTiO_2$ and $rnTiO_2$, expression of $MIP1{\alpha}$ mRNA in the PAM and protein in the culture media was significantly higher than in control cultures. Similarly to the in vivo results, $MIP1{\alpha}$ mRNA and protein expression was significantly lower in the $anTiO_2$ treated cultures compared to the $rnTiO_2$ treated cultures. Furthermore, conditioned cell culture media from PAM cultures treated with $anTiO_2$ had less effect on A549 cell proliferation compared to conditioned media from cultures treated with $rnTiO_2$. However, no significant difference was found in the toxicological effects on cell viability of ultra violet irradiated $anTiO_2$ and $rnTiO_2$. In conclusion, our results indicate that $anTiO_2$ is less potent in induction of alveolar macrophage infiltration, 8-OHdG and $MIP1{\alpha}$ expression in the lung, and growth stimulation of A549 cells in vitro than $rnTiO_2$.

• Proceedings of the Korean Ceranic Society Conference
• /
• 한국세라믹학회 2005년도 국제 전자세라믹 학술회의
• /
• pp.1-112
• /
• 2005

This report is results of a research on recent R&D trends in electroceramics, mainly focusing on the papers submitted to the organizing committee of the International Conference on Electroceramics 2005 (ICE-2005) which was held at Seoul on 12-15 June 2005. About 380 electroceramics researchers attended at the ICE-2005 from 17 countries including Korea, presenting and discussing their recent results. Therefore, we can easily understand the recent research trends in the field of electroceramics by analyses of the subject and contents of the submitted papers. In addition to the analyses of the papers submitted to the ICE-2005, we also collected some informations about domestic and international research trends to help readers understand this report easily. We analysed the R&D trends on the basis of four main categories, that is, informatics electroceramics, energy and environment ceramics, processing and characterization of electroceramics, and emerging fields of electroceramics. Each main category has several sub-categories again. The informatics ceramics category includes integrated dielectrics and ferroelectrics, oxide and nitride semiconductors, photonic and optoelectronic devices, multilayer electronic ceramics and devices, microwave dielectrics and high frequency devices, and piezoelectric and MEMS applications. The energy and environment ceramics category has four sub-categories, that is, rechargable battery, hydrogen storage, fuel cells, and advanced energy conversion concepts. In the processing and characterization category, there exist domain, strain, and epitaxial dynamics and engineering sub-category, innovative processing and synthesis sub-category, nanostructured materials and nanotechnology sub- category, single crystal growth and characterization sub-category, theory and modeling sub-category. Nanocrystalline electroceramics, electroceramics for smart sensors, and bioceramics sub-categories are included to the emerging fields category. We hope that this report give an opportunity to understand the international research trend, not only to Korean ceramics researchers but also to science and technology policy researchers.

• Journal of the Korean Academy of Esthetic Dentistry
• /
• 제32권1호
• /
• pp.16-22
• /
• 2023

Esthetic factors are very important in the success of maxillary anterior implant restoration. However, achieving esthetic results is difficult, especially in cases where periodontitis has resulted in severe alveolar bone loss. In the case of maxillary anterior teeth, the alveolar ridge resorption that begins immediately after tooth extraction interferes with the esthetic implant restoration. Therefore immediate implant placement can be performed to minimize the alveolar ridge resorption. However, in severe bone loss cases, immediate implant placement could result in esthetic failure, and this result might cause irreparable problems. We can also perform alveolar ridge preservation and then place implants later. On JCP published in 2019, there is the consensus of European academy of periodontology on the extraction socket management and the timing of implant placement. This consensus states that alveolar ridge preservation should be considered when there is severe labial bone loss in an esthetically important area such as maxillary anterior region. On performing the alveolar ridge preservation, we cannot obtain the primary wound closure, so secondary wound healing is induced with open membrane technique or soft tissue grafting should be performed for primary wound closure. However, the secondary wound healing can have a negative impact on bone regeneration, and soft tissue grafting such as FGG or CT graft can be burdensome for both patients and dentists. On the other hand, by using the granulation tissue in the extraction socket, primary closure can be achieved without soft tissue grafting. Also some studies have shown that granulation tissue in periodontal defects contains stem cells that may help in tissue regeneration. Based on this, implant restorations were performed on maxillary anterior teeth with severe alveolar bone loss by alveolar ridge preservation using granulation tissue. In spite of the severe bone defect of the extraction socket, relatively esthetic results could be obtained in implant restorations.