• Computers and Concrete
• /
• 제25권2호
• /
• pp.145-154
• /
• 2020

For the influence of the propagation law of stress wave at the coal-rock interface during the pre-blasting of the top coal in top coal mining, the ANSYS-LS/DYNA fluid-solid coupling algorithm was used to numerical calculation and the life-death element method was used to simulate the propagation of explosion cracks. The equation of the crushing zone and the fracturing zone were derived. The results were calculated and showed that the crushing radius is 14.6 cm and the fracturing radius is 35.8 cm. With the increase of the angles between the borehole and the coal-rock interface, the vibration velocity of the coal particles and the rock particles at the interface decreases gradually, and the transmission coefficient of the stress wave from the coal mass into the rock mass decreases gradually. When the angle between the borehole and the coal-rock interface is 0°, the overall crushing degree is about 11% and up to the largest. With the increase of the distance from the charge to the coal-rock interface, the stress wave transmission coefficient and the crushing degree of the coal-rock are gradually decreased. At the distance of 50 cm, the crushing degree of the coal-rock reached the maximum of approximately 12.3%.

• Geomechanics and Engineering
• /
• 제1권4호
• /
• pp.323-335
• /
• 2009

Gravels forming part of the base of flexible pavements experience abrasion and crushing as a result of static and dynamic loads. Abrasion takes place when the sharp corners of the particles of gravel are removed as a result of compressive and shear loads. As a result of abrasion, the particles change in shape. Crushing is caused by the fragmentation of the particles into a mixture of many small particles of varying sizes. In this study, the abrasion and crushing of gravels are evaluated experimentally and analytically. The laboratory component of this study involves gravels that were subjected to abrasion and dynamic compression tests. The evaluation of the abrasion and crushing experienced by the gravel was carried out using fractals. In this study, the fractal dimension concept from fractal theory is used to evaluate: (a) the changes in shape, and (b) the crushing (fragmentation) of the original particles of gravel. It was determined that the fractal dimension of the profile of the particles decreased as a result of abrasion. With respect to crushing, the fragmentation fractal dimension was found to increase with the degree of breakage of the gravel. To understand the influence of crushing on the permeability of the gravels, the hydraulic conductivity of the gravels was measured before and after crushing. The hydraulic conductivity of the gravels was found to decrease with an increase in their level of crushing. Also, changes in the angle of friction of the granular materials as a result of abrasion was calculated using the Krumbein's roundness chart. The angle of friction of the granular materials was found to decrease as a result of abrasion.

• 지질공학
• /
• 제24권1호
• /
• pp.23-38
• /
• 2014

아랍에미리트연합(UAE)의 Ruwais지역 Sabkha층 탄산질 모래는 석영질 모래와는 구성성분이 다르며 낮은 외부하중에서 쉽게 입자파쇄가 발생한다. 이러한 지반은 상부하중으로 인한 입자파쇄를 유발하여 추가 침하가 발생하며 전단강도가 감소하게 된다. 이러한 문제에 대한 구체적인 연구를 위하여 표준압밀시험과 삼축압축시험을 수행하여 탄산질 입자의 파쇄에 대한 다양한 공학적 특성을 분석하고자 하였다. 그 결과 탄산질 모래는 선행입자파쇄 정도에 따라서 파괴시 전단 응력의 크기가 다르게 나타났다. 즉, 응력경로를 나타내는 p-q 다이어그램에서 p' > p인 경우가 발생하였으며, 이때 내부 공극이 외부로 노출되어 음(-)의 간극 수압이 발생되었다. 또한, 입자파쇄로 인하여 증가하던 q값이 감소하였다. 삼축압축시험결과 탄산질 모래의 선행입자파쇄 정도에 따라서 압축시 발생되는 간극수압의 형태가 다르게 나타나 Sabkha층 탄산질 모래의 입자파쇄시 나타나는 다양한 거동특성을 알 수 있다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.299-304
• /
• 2010

We should manage the target locations according to the deterioration degree of the ballast for the rational and economical ballast cleaning. For this, it's required to define the logics calculating the crushing rates and suggest the threshold values for the ballast cleaning. This paper introduce the system modules that estimate the ballast's deterioration degree refers to the results of the previous study("A Study on the Crushing Characteristic of the Ballast Gravel at High-Speed Railroad", Journal of the Korean Society for Railway, Vol.11, No.4, pp.384~389), enroll the target locations where the ballast cleaning is required.

• Geomechanics and Engineering
• /
• 제12권1호
• /
• pp.127-138
• /
• 2017

A series of high-pressure isotropic compression tests were performed on four types of poorly graded silica sand that were artificially prepared based on representative grading curves and similar mineralogy composition of seabed sediment containing different fines contents existing in the Nankai Trough. The addition of fines steepens the initial compression path and increases the decrement of the void ratio after loading. The transitional behaviour of the poorly graded sand with a larger amount of fines content was identified. The slope of the normal compression line shows a slight decreasing tendency with the level of fines content. The bulk modulus of silica sand with fines was lower when compared with the published results of silica sand without fines. A small amount of particle crushing of the four types of poorly graded sand with variable fines content levels was noticed, and the results indicated that the degree of particle crushing tended to decrease as the fines content increased.

• 한국지반신소재학회논문집
• /
• 제12권1호
• /
• pp.1-10
• /
• 2013

본 연구는 포천에서 채취된 화강풍화토를 불산용액을 이용하여 인공적으로 풍화를 진행시켜서 풍화도 변화에 따른 화강풍화토의 입자파쇄 특성을 연구하였다. 이를 위해 조성광물 분석을 통한 풍화지수 결정 후, 입도분석, 표준다짐시험 및 변수위 투수시험을 실시하였다. 본 연구결과는 풍화가 진행되면서 전체입경분포에서 입자파쇄가 진행되었으며, 입경 $D_{10}$과 $D_{50}$에 대한 비표면적을 비교한 결과 입경 $D_{50}$ 이하의 작은 입경분포에서 입자파쇄가 활발하게 진행된 것으로 나타났다. 또한 다짐에 의한 입자파쇄 결과는 최적함수비 부근에서 입자파쇄가 최대치를 보였고 풍화가 진행됨에 따라서 비표면적 증분비가 감소하는 것으로 보아 풍화지수가 높을수록 입자파쇄에 둔감한 것으로 나타났다.

• Journal of Trauma and Injury
• /
• 제26권3호
• /
• pp.175-182
• /
• 2013

Purpose: Crushing injuries by car tires result from a combination of friction, shearing, and compression forces and the severity of injury is influenced by the acceleration. Because car-tire injuries of the lower leg in children are common these days but they have received little attention; thus, our purpose was to look closely into this problem. Methods: A retrospective analysis was conducted of data from children under 15 years old age who visited an emergency department because of a car-tire-related crushing injury to the lower leg in pedestrian traffic accident from January 2008 to September 2012. The patient's age, sex, site of injury, degree of injury, associated injuries, type of surgery, and complications were reviewed. Results: There were 39 children, the mean age was 8.0 years, and 71.8% were boys. The dorsal part of the leg was involved most frequently. According to the severity classification, 15 children were grade I, 6 were grade II, and 18 were grade III. Among 24 patients, 13 were treated with skin graft and 3 were treated using a sural flap. Twelve patients developed complications, such as hypertrophic scarring, contractures, and deformities with significant bone loss. Conclusion: Various degrees of skin or soft tissue defects were caused in children by car tires. In this study, patients were often also had tendon or bone damage. Proper and timely initial treatments are needed to reduce the incidence of infection, the number of operative procedures, and the hospital stay.

• 자원환경지질
• /
• 제55권5호
• /
• pp.429-438
• /
• 2022

본 연구는 골재 생산과정에서 화감암 파쇄시 풍화정도가 골재의 입도분포 및 미석분 발생량에 미치는 영향을 평가하였다. 경북 거창의 골재 채석장에서 슈미스 햄머 측정값으로 강도 차가 있는 3개 지역에서 암석 시료를 채취하였다. 실내에서 동일 조건에서 죠크러셔로 파쇄를 한 후 입도분석, 광물 분석, 화학분석과 풍화지수를 산출했다. 슈미트 햄머 측정값은 56, 28, <10로 나타났고 풍화지수인 CIA 및 CIW 값도 차이가 나타나 시료들을 풍화도에 따라서 경암, 연암 및 풍화암으로 구분했다. 경하에서 풍화암으로 갈수록 작은 입도분포를 보이며, 변질광물로 견운모와 같은 점토광물의 비율이 높아졌다. 경암은 장석 및 석영 비율이 높았고 백운모 및 고령석(kaolinite)의 비가 작았다. 죠크러셔 파쇄 결과 경암은 굵은 파쇄물(13.2mm)을 많이 생산한 반면 풍화가 진행된 연암 및 풍화암은 가는 파쇄물(4.75mm)을 생산했다. 전자는 베타분포 곡선 특징을 보였고 후자는 쌍봉 분포 곡선을 보였다. 미석분(0.71mm 체 이하; 중량 %) 발생은 경암, 연암, 풍화암에서 13%<21%<22%로 증가하여 풍화도가 클수록 미석분이 많이 발생했다. 미석분은 습식 골재 생산 공정에서 샌드 유닛(모래탈수장치)의 운전으로 회수된다. 따라서 골재생산 공정에서 슬러지 발생량을 최소화하기 위해 사이클론의 최적 운전에 대한 연구가 필요할 것으로 판단되었다.

• Journal of Biomedical and Translational Research
• /
• 제19권4호
• /
• pp.103-109
• /
• 2018

Aspergillus luchuensis 34-1 was inoculated into wheat pellets with different conditions of raw materials to produce nuruk. The degree of substrate reactivity improvement of steam treated raw materials compared with that of non-heat treated was analyzed. The water content of the pellet was adjusted to 25% and 35%, and steam treatment for 10 minutes improved the substrate reactivity at 2.1-fold and 3.1-fold, and sterilization was also possible. The characteristics of improvement pellet nuruk were investigated according to the degree of crushing and water content of raw materials according to the temperatures and humidities ($23^{\circ}C$, $30^{\circ}C$ and RH 60%, RH 80%). The pH of the pellet nuruk was higher depending on the temperature, humidity and moisture content of the koji were lower, and the pH of the flour-pellet nuruk was lower than that of 2 mm milling wheat-pellet nuruk according to milling degree. It can be seen that the milling degree affects the growth of mold. The acidity and amino acid were generally higher as fermentation time increased. Also, the higher the incubation temperature, humidity and moisture content, the higher the value. Glucoamylase activity was significantly the highest in moisture content 35% D2b nuruk, cultured at $30^{\circ}C$ and 80% RH for 38 hours. This is higher than the previous reports on glucoamylase of rice-koji or commercial nuruk using fungi isolated from traditional nuruk. From these study, it is expected that making of improvement pellet nuruk would save the fermentation time considerably compared with traditional nuruks.

• 한국세라믹학회지
• /
• 제56권2호
• /
• pp.153-159
• /
• 2019

In this study, fly ash of a fluidized bed boiler produced in a power plant was stabilized by hydration and carbonation reaction. Then, each raw material was pulverized by two kinds of grinding equipment (Planetary mills and pot mills); the degree of grinding and the agglomeration behavior were observed. It was found that there were changes of specific surface area and particle size distribution according to grinding time. The surface of the raw material was observed using an optical microscope. As a result, agglomerates of about 75 ㎛ or more due to electrostatic phenomenon were formed as the grinding time became longer; it was confirmed that the crushing efficiency slightly increased with use of antistatic agent.