• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume II
• /
• pp.676-679
• /
• 2006

Mangrove crowns were delineated using active sensor LIDAR (LIght Detection And Ranging) data by a crown delineating model developed in this study. LIDAR data were acquired from airborne survey by a helicopter for the estuary of Macouria in the northeast coast of French Guiana. The canopy height image was derived from LIDAR vector data by calculating the difference between ground and non-ground data. The mangrove site in the study area was classified to three sectors by the time of mangrove settlement; Mangrove 1986, 2002 and 2003. The estimated crown of Mangrove 1986 was reliable defined for their size, number and volume because of larger crown size and bigger variation of crown height. The tree crown size of Mangrove 2002 and 2003 by the model was overestimated and the number of trees was much underestimated. The estimated crown was not for single crown but a crown group due to homogenous crown height and spatial resolution of LIDAR data. However the canopy height image derived from LIDAR data provided three-dimensional information of mangroves.

• 한국산업융합학회 논문집
• /
• 제6권2호
• /
• pp.109-113
• /
• 2003

We report herein synthetic results obtained new types of crown ethers containing coumarin group. Crown ethers containing coumarin group 1~3 are hydroxymethyl-15-crown-5-ether linked with 4-hydroxy coumarin-4-acetic acid by esterification reaction. Crown ethers containing coumarin group 1~3 have different cavity in each crown ether rings. The 12-crown-4 ether with coumarin 1 has the smallest cavity size. The 15-crown-5 ether with coumarine 2 has the medium cavity size. The 18-crown-6 ether with coumarin 3 has the largest cavity size. Therefore each crown ether with coumarin group will recognize different ionic radius meta. Because of different hole size in crown ethers, these crown ethers seem to be had different selectivity in luminescent sensors. The crown ethers with coumarine 1~3 synthesized hydroxymethyl-15-crown-5-ether and 4-hydroxy coumarin-4-acetic acid same ratio at one to one. The synthesized crown ethers were characterized respectively by IR, NMR. GC-Mass.

• 대한치과기공학회지
• /
• 제39권2호
• /
• pp.93-99
• /
• 2017

Purpose: With the development of digital dental technology, we are manufacturing prosthetic crown in various ways. However, the wax-up method that makes existing prosthetic crown is also used steadily. Thus, we will compare the shape of the crown designed with wax-up and the crown designed with CAD. Methods: Sculpt the crown with wax-up on the model to 10 dental technicians. The same model was used to design the crown CAD. Measure the size of the sculpted crown. The shapes were compared in three dimensions. Results: As a result, we could observe a difference in size and shape in crown designed with wax - up crown and crown. Conclusion: These results suggest that there are differences according to the method of carving crown and the method of processing.

• 한국약용작물학회지
• /
• 제6권3호
• /
• pp.198-203
• /
• 1998

작약 분주묘의 크기에 따른 생육과 품질을 조사하여 재배법 개선의 기초자료로 활용코자 1994년 10월부터 3개년간 의성에서 의성작약을 공시하여 수행한 시험 연구 결과는 다음과 같다. 1. 작약의 분주묘 크기가 클수록 출현을 및 활착율은 높은 경향이 었으며 지상부 생육도 양호하었다. 2. 소묘$(30{\sim}50g)$재배의 지하부 수량은 1,921kg/10a이었으나 중묘$(60{\sim}80g)$는 2,304kg, 대 묘$(60{\sim}80g)$는 2,674kg으로서 각각 30%, 39% 증수되어 재식종묘 크기가 클수록 증수 되었다. 3. 분주묘 크기별 뿌리 굵기 10mm이상의 상품량은 소묘재배가 1,406kg/10a인데 비하여 중묘는 1,554kg/10a, 대묘는 1,769kg/10a으로 중묘와 대묘 재배시 상품율은 각각 11%, 26%높았다. 4. 분주묘 크기별 소득은 소묘가 1,133천원/10a인 데 비하여 중묘나 대묘는 각각 28%, 48% 증가 되었고 노두 생산량도 분주묘가 클수록 증수되었다.

• 한국산림과학회지
• /
• 제96권2호
• /
• pp.189-196
• /
• 2007

Allometry, basal area equations, and volume equations were developed with various tree measurement variables for the major species, Quercus mongolica and Quercus variabilis, in Korean natural hardwood forests. For allometry models, the relationships between total height-DBH, crown width-DBH, height to the widest portion of the crown-total height, and height to base of crown-total height were investigated. Multiple regression methods were used to relate annual basal area growth to tree variables of initial size (DBH, total height, crown width) and relative size (relative diameter, relative height) as well as competition measures (competition index, crown class, exposed crown area, percent exposed crown area, live crown ratio). For tree volume equations, the combined-variable and Schumacher models were fitted with DBH, total height and crown width for both species.

• 대한소아치과학회지
• /
• 제46권1호
• /
• pp.64-75
• /
• 2019

이 연구의 목적은 임상에서 많이 사용되고 있는 3종의 기성 크라운 즉, 레진관, 레진피복 금속관, 지르코니아 크라운의 크기와 형태를 3차원적으로 계측하여 자연치와 비교함으로써 기성 크라운의 크기 선택과 치질 삭제량에 대한 지침을 얻고자 하는데 있다. 300개의 유전치 석고모델과 3종의 기성 크라운을 대상으로 3D 스캐너와 컴퓨터 이미지 프로그램으로 3차원적 모델을 만들었다. 3차원 모델에서 치관의 근원심 너비, 치관 높이, 치관 ratio, 순면의 곡률반경 등 4가지 평가 척도에 의해 각 기성 크라운별로 한국인 자연치 표준모형과 가장 유사한 형태를 고르고 이를 기준으로 치질 삭제량을 비교, 평가하였다. 유중절치의 경우 기성 크라운별로 레진피복 금속관은 2번, 지르코니아 크라운은 1번, 레진관은 2번이, 유측절치의 경우 레진피복 금속관은 3번, 지르코니아 크라운은 2번, 레진관은 3번이 가장 유사한 형태를 보였다. 치아 삭제량은 상악 유중절치와 유측절치에서 같은 양상을 보였다. 절단연에서는 지르코니아 크라운의 삭제량이 가장 컸다. 인접면은 지르코니아 크라운과 레진관이 비슷한 삭제량을 보였으며 레진피복 금속관에 비해서 컸다. 순면 역시 지르코니아 크라운이 유중절치와 유측절치에서 삭제량이 가장 컸다. 설면의 경우 순면에 비해 전체적으로 삭제량이 적었으며 3종류의 기성 크라운 간에 삭제량 차이도 크지 않았다. 크라운의 형태를 비교하기 위한 4가지 평가 척도 중 치관의 근원심 너비가 기성 크라운의 크기를 선택하는데 가장 중요한 척도로 나타났다.

• 대한원격탐사학회지
• /
• 제27권6호
• /
• pp.703-715
• /
• 2011

Forests have been considered one of the most important ecosystems on the earth, affecting the lives and environment. The sustainable forest management requires accurate and timely information of forest and tree parameters. Appropriately interpreted remotely sensed imagery can provide quantitative data for deriving forest information temporally and spatially. Especially, analysis of individual tree detection and crown delineation is significant issue, because individual trees are basic units for forest management. Individual trees in aerial imagery have reflectance characteristics according to tree species, crown shape and hierarchical status. This study suggested a method that identified individual trees and delineated crown boundaries through adopting gradient method algorithm to amplified greenness data using red and green band of aerial imagery. The amplification of specific band value improved possibility of detecting individual trees, and gradient method algorithm was performed to apply to identify individual tree tops. Additionally, tree crown boundaries were explored using spectral intensity pattern created by geometric characteristic of tree crown shape. Finally, accuracy of result derived from this method was evaluated by comparing with the reference data about individual tree location, number and crown boundary acquired by visual interpretation. The accuracy ($\hat{K}$) of suggested method to identify individual trees was 0.89 and adequate window size for delineating crown boundaries was $19{\times}19$ window size (maximum crown size: 9.4m) with accuracy ($\hat{K}$) at 0.80.

• Journal of Ecology and Environment
• /
• 제35권3호
• /
• pp.177-188
• /
• 2012

We analyzed crown development in Aucuba japonica Thunb. var. japonica resulting from the responses of phytoelements to habitat light conditions over a long period of time. Over the years, the degree of extension unit (EU) dimorphism and the degree of anisophylly were higher under shaded conditions than in brighter conditions. An overall temporally increasing pattern in the degree of EU dimorphism was found while no clear-cut trend was found in the case of anisophylly. EU length and number of leaves per EU co-varied in a spatio-temporal context. The number of terminal buds and their sizes acted as the key initiators of morphological differences of phytoelements which were further amplified following bud break. Leaf area density was displayed mostly in the apex peripheral layer of the crown and the apex layer received most of the incident light. There was a tradeoff between annual leaf production and mean leaf size. Depending on the heterogeneity of irradiance level within a crown, correlative growth inhibition caused higher EU mortality at brighter sites. Due to high mortality, shorter EUs had a mere role in the construction of structural framework of the crown except for the formation of some gaps. There was a strong convergence of EU dimorphism, anisophylly, EU extension growth and variations in leaf size towards formation of functional crown to reduce potential self-shading. Depending on the irradiance level, Aucuba japonica Thunb. var. japonica showed two different modes of crown expansion. At the brighter sites, individual crown expansion was progressive while at the darker sites, individual crown expanded in a diminishing manner and maintained a stable size. A plant's "growth diminishing phase" appeared earlier at shaded sites than brighter sites.

• Journal of Forest and Environmental Science
• /
• 제27권1호
• /
• pp.47-54
• /
• 2011

Allometry and basal area equations were developed with various tree measurement variables for the major species; Quercus variabilis, Quercus mongolica, Pinus koraiensis and Larix leptolepis in Korea. For allometry models, the relationships between total height-DBH, crown width-DBH, height to the widest portion of the crown-total height, and height to base of crown-total height were investigated. Multiple regression methods were used to relate annual basal area growth to tree variables of initial size (DBH, total height, and crown width), relative size (relative diameter and relative height) as well as competition measures (competition index, crown class, and live crown ratio).

• 한국식물병리학회:학술대회논문집
• /
• 한국식물병리학회 2003년도 정기총회 및 추계학술발표회
• /
• pp.70.2-70
• /
• 2003

To evaluate the resistance to crown gall in grape rootstocks, cuttings from twenty seven grape rootstocks were inoculated with Agrobacterium vitis Cheonan 493 and size of galls from grapevines was measured in a greenhouse. Tumors were formed in all varieties of grape rootstocks tested in this study and no grape rootstock variety was immune to crown gall. Tumors were found on the stems of all plants tested in '196-17'and '41B' Based on measuring size and weight of galls formedon the stem of grape rootstocks, '779P' was extremely susceptible to crown gall. Some varieties such as 'Gloire', '140R', '101-l4M', '3309C', and '333EM' found to be resistant, while '99R', '1447P', 'Rupestris du lot', '110R', 'Freedom', and '41B'were susceptible and '1103P', '5C', '420A', 'Golia', and '5BB' were moderately susceptible to crown gall.