• Journal of Korean Society of Forest Science
• /
• v.78 no.3
• /
• pp.302-313
• /
• 1989

To investigate the effects of forest fire on the change of vegetation and soil conditions by the lapse of time, the 5th soil survey and vegetation analysis were carried out in July of 1988 at the rocky areas of Mt. Kwanak, where ground fire broke out 5 years ago. Three-year increasing trends of organic matter content, the value of pH, and total nitrogen content stabilized after the restoration of the vegetation. By the comparison of the occurrences of the species for 5 years after the forest fire, woody and herbaceous plants were categorized into 4 groups, i,e., invasive, sensitive, tolerant, and neutral species to the forest fire. Although such diversity indices as the species diversity and similarity index indicate that the restoration of damaged vegetation to the original species composition was proceeded for the period, the restoration of vegetation to the original crown closure and tree growth was not proceeded yet.

• Journal of Korean Society of Forest Science
• /
• v.1 no.1
• /
• pp.12-21
• /
• 1962

Outdoor cuttings studies on two coniferous species, pitch pine and needle fir, have been made at Suwon, Korea extending from March to early May, 1956. The purpose of these studies was to find the effects of ages of parent trees, topophysis, dilute hormone solution treatments and the time at which the cuttings were collected on the rooting response of the cuttings. On September 2, rooting results were examined. Pitch Pine (Pinus rigida) The total of 1335 cuttings were collected from 3- and 10-year old trees. The cuttings treated were planted on March 13 and April 20. 1. In the cuttings collected from 3-year-old seedlings, the best result (34 percent rooted) was obtained by treating ends of cuttings with a mixture of 50 ppm IBA and 50 ppm NAA. 2. No rooting was observed in lammas shoots. 3. The cuttings from 3-year-old seedlings gave better rooting than those from 10-year-old trees. 4. The root origins were developed from the lower part of the cutting and the cut surface. Needle fir (Abies holophylla) One hundred twenty-five cuttings were collected from a 30-year-old tree. The cuttings treated with any one of four mixed hormone solutions were planted on March 23. 1. Fifteen cuttings out of 75 cuttings from the lower half of the crown were rooted. The cuttings obtained from the upper half of the crown did not root at all. 2. The cuttings treated by the hormone solution made up of 20 ppm IAA, 20 ppm IBA, 20 ppm NAA, 20 ppm thiamine and 5 percent sucrose gave the best rooting (22 percent). 3. All roots originated from callus tissues and irregularly arranged parenchymatous tissues near the cut base.

• Restorative Dentistry and Endodontics
• /
• v.34 no.2
• /
• pp.103-112
• /
• 2009

The purpose of this study was to compare the effect of curing methods of adhesive resins and resin cements in the root canal. Crown portions of 32 single-rooted mandibular premolars were removed. Routine endodontic treatment was done, and 9 mm deep post spaces were prepared within root canals. No.3 FRC Postec posts (Ivoclar-Vivadent AG, Liechtensteih) were cemented in the post spaces by self-(SC) or light-curing (LC) using two dual-cured adhesives (Adper Scotchbond multi-purpose plus and Exite DSC )and resin cements (RelyX ARC and Variolink II). They were assigned to 4 groups (n=8): R-SC, R-LC, V-SC, V-LC group. After stored in distilled water for 24 hours, each root was transversally sectioned with 1.5 mm thick and made three slices. The specimens were subjected to push-out test in a universal testing machine (EZ Test, Shimadzu Co., Japan) with a crosshead speed of 1 mm/min. The data were analyzed with repeated ANOVA and one-way ANOVA. Also the interface of post-resin cement and resin cement-canal wall of each group was observed under FE-SEM. When fiber posts were cemented into the root canal using total-etch adhesives, the bond strength and adaptation between post and root canal dentin was affected by curing method. Self-cure of adhesives and resin cements showed higher bond strength and closer adaptation than light-cure of them.

• Journal of the Korean Society of Costume
• /
• v.7
• /
• pp.5-19
• /
• 1983

Sacredotal robe(法服) means full court dress. We can't know about the shape of sacredotal robe before Dae-Han Empire(大韓帝國) since there are no remains of it. The study of sacredotal robe for queen have also been made centering around the socredotal robe granted from Ming(明) dynasty and the system of Juck-Eui(翟衣) in Dae-Han Empire. In this thesis I tried to study about the sacredotal robe for queen from King Gong-Min(恭愍王) of Koryeo(高麗) dynasty to the close the Cho-Sun(朝鮮) dynasty by investigating the Literature of Cho-sun Dynasty Chronicles(朝鮮王朝實錄), Ga Rae Do Gam Eui Gue(嘉禮都監儀軌), Sang Bang Jung Rae(尙方定例), Gook Hon Jung Rae(國婚定例), Sok-Orae Eui-Bo(續五禮儀補), and Dae Myung Whe Jeon(大明會典). The first documents on sacredotal robe for queen is regarded as that in the period of King Gong Min., which says that Chil Whee Gu Bong Gwan and Juck Eui of the 9th grade had been given from Ming dynasty. The sacredotal robe for queen in Chosun had been granted from Ming dynasty since the 3th years of King Tae-Jo(太祖) to the 3th years of King In-Jo(仁祖). They were Ju Chui Chil Juck Gwan, red Dae Sam(大衫), Bae Ja(褙子) embroidered with. pheasants on blue silk, and ivory flat baton (笏), which belonged to the court dress for the first class of court lady. When Qing(淸) dynasty succeeded to Ming dynasty, Cho-sun adopted the system of luck Eui which had it's origin in the system of Ming, denying to comply with Chung. But as a matter of fact, the system of sacredotal robe for queen actually used was one which were different from the dress system of Ming and converted into our national ways. In the latter period. of Cho-sun, the system of Bae Ja or Juck Eui were used together until the period of King Young Jo(英祖), and the system of Juck Eui which was written in Gook Hon Jung Rae was continually used from King Young Jo to the close of Cho-sun. It was composed of Juck Eui, Beol Eui(別衣), Nae Eui(內衣), Pe Sool(蔽膝), Dae Dae(大帶), HaPi, Sang(裳), Ok Dae(玉帶), Pae Ok(佩玉), Gue(圭), Mal(襪), Suk, and Myun sa(面紗), The headdress was used in our own ways, not complying with Juck Gwan(翟冠). The color of Juck Eui was red for queen, deep blue for the consort of the crown prince. The color of Juck Eui in DaHan Empire was deep blue, different from that of Juck Eui in Cho-sun. Bo(補) for queen wus embroidered with dragon with five claws and the one for the consort of crown prince with dragon with four claws. The back length of Juck Eui was longer than front about 28cm (1尺), and the front opening was straight down. 51 motifs of a brace of pheasants which were similiar to Bong(鳳) were embroidered on Juck Eui for queen. But we can't find out whether there 31 or 51 on Juck Eui for the consort of the crown prince. The system shows independant aspects, because there are Bo, Myun Sa, Sang, Ha Pi, Beol Eui, and Nae Eui which were not found in the system of Ming. As mentioned above, I have studied on the sacredotal robe for queen. But we can't guess the detail of sacredotal robe for queen, because there are no remains at all. Therefore I expect more study on this.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.20 no.2
• /
• pp.109-120
• /
• 2004

INTRODUCTION: The build-up method has been used for application of porcelain powder on the metal framework to make final tooth shape conventionally. This method takes time and need skill to mimic final shade and shape of porcelain fused to metal crown. The purpose of this study was to develop standard shape and shade laminating porcelain forms to reduce build-up time. METHODS: To make tooth form porcelain paste, several liquid organic compounds were added to conventional feldspathic porcelain. The amount of additives and rheologic property were tested to find out best composition. Comparison of mixing methods to reduced porosity, proper heating schedule, and measurement of shrinkage amount and residual organic materials were performed to set-up standard procedures. Finally, biaxial flexural strength and color of preformed laminated paste porcelain were compared with those of porcelain which fabricated by the conventional build-up method. RESULTS: There was no significant difference in physical properties and color stability between two fabrication methods after various testing methods. Conclusion: This new build-up method can be applied to fabricate the PFM crown and bridge without any loss of strength and optical properties.

• Journal of Korean Society of Forest Science
• /
• v.98 no.4
• /
• pp.409-416
• /
• 2009

Forest biomass estimation is essential for greenhouse gas inventories and terrestrial carbon accounting. Remote sensing allows for estimating forest biomass over a large area. This study was conducted to estimate forest biomass and to produce a forest biomass map for Muju county using forest biomass conversion table developed by field plot data from the 5th National Forest Inventory and Landsat TM-5. Correlation analysis was carried out to select suitable independent variables for developing regression models. It was resulted that the height class, crown closure density, and age class were highly correlated with forest biomass. Six regression models were used with the combination of these three stand variables and verified by validation statistics such as root mean square error (RMSE) and mean bias. It was found that a regression model with crown closure density and height class (Model V) was better than others for estimating forest biomass. A biomass conversion table by model V was produced and then used for estimating forest biomass in the study site. The total forest biomass of the Muju county was estimated about 8.8 million ton, or 128.3 ton/ha by the conversion table.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.40 no.4
• /
• pp.1-17
• /
• 2012

This study was carried out to propose the improved method by analyzing the change of green space arrangement and planting structure of apartment complexes in Seoul. 12 survey sites, which have obvious differences, were selected by reflecting the change of floor area ratio, underground parking place, and green space ratio. We divided the survey sites into four types that high green ratio(over 40%) apartment on natural ground, low green ratio(under 40%) apartment on natural ground, low green ratio(under 40%) apartment on artificial ground, and high green ratio(over 40%) apartment on artificial ground each period based on green space ratio and ground structure, plant crown volume, planting density, and planting pattern. The main factors of change of green space arrangement were green space ratio and ground structure. The Green space ratio was changed by the floor area ratio with constructing underground parking place and floor area ratio was adjusted by government policy and economic status. Average width of front green area has been changed from 10.0m in high green ratio apartment on natural ground for 3.5m, 2.7m, and 4.5m each period. The average width of the buffer green area has been changed from 15.0m in high green ratio apartment on natural ground of 7.7m, and 2.7m by extending parking place in the low green ratio apartment of artificial ground, so buffer green areas have been reduced and disconnected. So buffer green area in apartment complexes has been extended that the average width of the buffer green area was 3.8m caused by growing recognition of green since 2001. The ratio of native plant in canopy layer was increased from 45.1 % in the case of the high green ratio apartment of natural ground in 1980~1983 to 55.6%. Average plant crown volume increased from $1.27m^3/m^2$ in high green ratio apartment on natural ground for $3.47m^3/m^2$ in a low green ratio apartment on natural ground. But average plant crown volume is $0.27m^3/m^2$ in the high green ratio apartment of the artificial ground plant density of canopy layer was changed from 5 individuals per $100m^2$ to 14.5 individuals per $100m^2$. We should construct the buffer green area with natural ground and get the function of ecological and beautiful environment regarding to garden concept in case of front green area, width 4.5m. We should get the function of increasing green volume by multi-layer planting with shade woody species and flower woody species in case of back-side green area, width over 5.0m. We should get the function of covering the wall and increasing green landscape by planting with high woody species in case of side green area. We should apply the ecological planting technique to buffer green area and connect buffer green area to inner green area in apartment complexes.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.21 no.2
• /
• pp.279-299
• /
• 2019

Recently occurred earthquake Gyeongju and Pohang served as a momentum to remind that Korean peninsular is not a safety zone from earthquake anymore. The importance of seismic design, therefore, have been realized and researches regarding design response spectrum have been actively carried out by many researchers and engineers. Current tunnel seismic design method is conducted to check safety of tunnel structure by dynamic numerical analysis with condition of completed lining installation, so, it is impossible to consider safety of tunnel behavior under construction. In this study, therefore, dynamic numerical analysis considering seismic wave propagations has been performed after back analysis using results from field monitoring of tunnel under construction in fractured zone and 1st reinforcement (shotcrete, rockbolt) behaviour are analyzed. Waves are classified by period characteristic (short and long). As a result, the difference depending on period characteristic is minor, and increasements of displacement are obtained at crown displacement due to seismic wave is 28~31%, 14~16% at left side of tunnel in the fractured zone, 13~27% at right side of tunnel in the bed rock, respectively. In case of shotcrete axial force is increased 113~115% at tunnel crown, 102% at left side, 106~110% at right side, respectively. Displacement and axial force of rockbolts which are selected by type of anchored grounds (only fractured zone, fractured zone and bed rock, only bedrock) are analyzed, as a result, rockbolt which is anchored to fractured zone and bed rock at the same time are weaker than any other case.

• Journal of Technologic Dentistry
• /
• v.25 no.1
• /
• pp.41-62
• /
• 2003

In this research, we manufactured the paste opaque porcelains using Propylene Glycol (PG) and Buthylene Glycol (BG) as a solvent, and compared the composition of solvents, the coefficient of thermal expansion, the particle size distribution, the viscosity and bonding strength to metal, and the tone with those of the commercial products(Duceram Plus, Duceram GmbH; VMK 95, Vita Co.; Noritake EX-3, Noritake Co.)used in the clinical field. The results of the research were as follows: 1. The result of solvent analysis indicated that the solvents included in the paste opaque porcelains of the control group were mainly composed of Glycols. 2. From the Coefficient of thermal expansion measurement, we drew out the following results; testing group: $14.0\times10^{-6}/^{\circ}C$, Duceram Plus: $13.9\times10^{-6}/^{\circ}C$, VMK 95: $14.3\times10^{-6}/^{\circ}C$, and Noritake EX-3: $13.3\times10^{-6}/^{\circ}C$. 3. Seen from the result of particle size distribution measurement, the experimental group was similar to the control group in 1$\mu m$ below, but the experimental group marked the highest distribution of 61% in the case of between 1$\mu m$ and 5$\mu m$. Between 5$\mu m$ and 10$\mu m$, they showed relatively similar distribution, and Noritake EX-3 was turned out the highest distribution of 29% in 10$\mu m$ above. 4. From the result of viscosity measurement, Duceram plus showed the highest viscosity throughout all the measurements followed by Noritake Ex-3, experimental group and VMK 95 in decreasing order. 5. The result of bonding strength measurement was EX 35.53 $\beta\acute{A}$, DU 40.88 $\beta\acute{A}$, VM 39.43 $\beta\acute{A}$, and NO 35.39 $\beta\acute{A}$, and no significant difference was found between the experimental group and the control groups(P>0.05). 6. The measurement of the tone indicated that the $L^*$ value of the experimental group was 86.89 0.63 in average, which is higher than the control group in its brightness. In the case of the $a^*$ value, Duceram Plus, VMK 95 and EX-3 showed positive value, whereas the testing group was turned out negative value. In $b^*$ value, Duceram Plus proved the highest. From the results of this research, the paste opaque porcelains using Propylene Glycol (PG) and Buthylene Glycol (BG) as a solvent did not make differences from the commercial products that are actually used in the clinical fields. Therefore, it is possible to utilize Propylene Glycol (PG) and Buthylene Glycol (BG) for the paste opaque porcelains of P.F.M crown. It is also recommended that further researches concerning the compositions and forms of powder, the types of organic solvent components and the ratio of mixture proceeded in order to improve the level of productivity in the future.

• Journal of the Korean Society of Costume
• /
• v.50 no.7
• /
• pp.15-31
• /
• 2000

1. After the Chu Dynasty(周代), we can confirm the fish shape mark made of stones as the relics of the Chunkuk dynasty(戰國時代). In the Shu Dynasty(隋代), the system of bamboo and the rabbit shape mark made of silver into the fish shape mark. As it were, made of bamboo or siltier changed into the fish shape mark made of jade, gold, silver or wood. 2. In the Dang Dynasty(唐代), the used the fish shape credit mark made of jade, gold, silver, copper or textile, according to their classes. According to one's posit the man who wore purple, red coat, credit mark made a gold and silver. attached with putting them in fish bags. 3. In the Ryo Dynasty(遼代), there was also a system of attaching marks. The emperor was hanging the fish shape and the officials attached the double fish shape to the common dress. fish shape of jade. gold, amber, agate, silver or copper. without any fish bag. 4. The Song Dynasty(宋代) followed the system of the Dang Dynasty they used only the fish shape bags without marks in them. Hanging the fish shape bags made of gold and silver at the back side of the belt. 5. The Gin Dynasty(金代) carried out the system of made jade, gold or silver like the Dang, Song and Ryo Dynasty. In the Sejong Kingdom a system of paper card was carried out as the credit mark of the eighth and the ninth grade. 6. In the Ming Dynasty(明代), the military official general attached the golden, silver, ivory of jade, wood and copper cards with their positions and names. 7. Following the Dang Dynasty, Japan made of fish shape bags to their clothes. Colors of their fish shape marks were same as their clothes. They made the marks, such as crystal, cow's horn, lead and nickel and plated them with gold or silver. 8. In Korea, Pohai(발해) established the fish shape credit mark differed in material. gold, silver or copper according to their positions. We can confirm the Unified Silla(南國;統一新羅), carried out the system of attaching the fish shape in Chonma Chong(천마총), Golden Crown Chong(金冠塚), the King's 13-17 belt ring unearthed at the north part of Court South threat Chong(황남대총), the fish shape golden or silver, to their purple or red ceremonial coats. In the Koryo Dynasty(高麗), like the Dang, Song and Pohai, they attached the fish shape golden or silver marks, to their purple or red ceremonial coats.