• Horticultural Science & Technology
• /
• v.33 no.1
• /
• pp.149-154
• /
• 2015

A new Phalaenopsis cultivar 'SM 333' was bred by Sangmiwon Orchid, Korea, which produces young plants through tissue culture techniques. The new cultivar 'SM 333', showing the phenotype of multiflora with pink color and small, multibranching-type characteristics, was derived from crossing between Phalaenopsis 'Odoriko' and 'Be Tris'. An elite individual number '02-03-33' later termed 'SM 333' was selected among about 300 individual progenies, based on an intensive selection process covering vegetative and flowering distinctiveness over more than 2 years. In year 2004-2005, the 1st and 2nd characteristic analyses were carried out through performance and uniformity tests. 'SM 333' shows flower color that is bright clean pink (RHS # RP69D) and flower shape that is formal type with 5.0 and 5.8 cm in flower height and width, respectively. 'SM 333' is regarded as raceme flower type suitable for the small casual flower market. The leaves of 'SM 333' grow horizontally and about 20.8 cm in length and 6.5 cm in width. This cultivar also possesses no genetic variation, and is amenable to fast in vitro propagation and easy growth due to its vigorous growth habit. This 'SM333' was registered (Reg. # 2916) with Korea Seed & Variety Service (KSVS) on 1st December, 2009, and the plant breeder's right is currently controlled by Sangmiwon Orchid Company, Korea.

• Korean Journal of Breeding Science
• /
• v.41 no.3
• /
• pp.306-309
• /
• 2009

A New bicolor standard rose (Rose hybrida Hort.) cultivar were developed by line selection in 2000 at the Flower Research Institute, Gyeongnam ARES. Characteristics were investigated three times from 2003 to 2006 "Grandking" was crossed between 'Bixa' and 'Red Sandra' and it has a red-group color (RHS No. 52A), few thorns and standard large flower with a good harmony between ray floret and flower center. The vase life of cut flower was 12.8 days. The major characteristics of this variety are 228 stems/$m^2$/year in yield, 77.4 cm in length of cut flower, 9.0 cm in flower diameter, and 36.1 in petal number. It was registered as commercial cultivar in 2006. These new variety could be planted in almost greenhouse production region of Korea.

• FLOWER RESEARCH JOURNAL
• /
• v.19 no.3
• /
• pp.164-167
• /
• 2011

A new spray rose cultivar 'Glory Purple' was bred from the cross between a pink spray cultivar 'Macarena' and a pink spray cultivar 'Million Pink' at the National Institute of Horticulture & Herbal Science. The cross was made in 2004 and a candidate genotype which named as 'Glory Purple' was selected in 2009 after three years investigation for agronomical characters from 2007 to 2009. 'Glory Purple', a purple colored spray cultivar, has vigorous growth and has powdery mildew resistance. The major characteristics of this cultivar are high yield and long stem with relatively large flower size with $157stems/m^2/year$ in yield, 63.5 cm in mean length of cut flower, 6.8 cm in mean flower diameter, 25.78 in mean petal number, and 10.2 days in mean vase life. This cultivar is suitable for propagation by both cutting and grafting methods. The consumer's preference of this cultivar is relatively higher than that of the control cultivars, 'Pinky and Charming'.

• Korean Journal of Breeding Science
• /
• v.42 no.3
• /
• pp.294-297
• /
• 2010

A new intermediate parent 'Wonye 30001' (Allium cepa L.) was developed by Bioenergy Crop Research Center, NICS in 2009. As a male sterile line, 'Wonye 30001' could be used for hybrid seed production by crossing with pollen parent. The first cross was conducted in 2000. Male sterile plants were selected from 'Ginque' breeding lines and fertile plants were selected from YG-1-1. The male sterile line 'Wonye 30001' has circular bulb and bulb weight of 260 g. As mid-late maturing type, lodging date is around May 20. Plant height and stem diameter are 57 cm and 15.9 mm, respectively. In seed harvesting characteristics, number of flower stalks and the length are 6 and 135cm, respectively. Flowering date of 'Wonye' is May 23 and is completely male sterile. 'Wonye 30001' is a promising male sterile line for hybrid bulb onion seed production.

• Cross-Cultural Studies
• /
• v.42
• /
• pp.131-163
• /
• 2016

The issue of migrants has always been a social problem in France. Particularly, migration issues from the Maghreb region to multicultural France are recognized as topics of confrontation and conflict. One of the many reasons would be that the Maghreb migrant issue is interpreted with a hostile or conflicting 'Arab-Islam' meaning in the West. Therefore, the naming of natives from this region as 'Arab-Maghrebis' has become a common phenomenon. However, deeper understanding of the Maghreb region will explain that such naming could produce a number of problems. This is because the native Maghrebis, not only in the Maghreb region but also in France, are Berbers. Among the various Berbers, the Kabyles are in many ways different from the Arabs in their language, culture, and way of thinking. Apart from the difference in their lifestyle, there is a deep anti-Arab sentiment within them that represents their resistance against the hundreds-of-years Arab domination. This feature has also been used as France's tool of colonial division policy during the colonization period. The purpose of this study is to discuss the settlement process of the Kabyles in France by paying attention to their features. The Kabyles were the first to migrate to France among the natives of the Maghreb region. This study focuses on the process of their migration and search for identity, as well as how they continued to form community and the Berber's cultural movement. Through these series of processes, it is possible to point out the fictitious claim in France and in Korea that Maghrebis are Arab-Muslims. Lastly, the current use of Berber language in France and Algeria is not a coincidental phenomenon, rather it has a connection with the prolonged cultural movement and the settlement process of the migrants in France.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.2
• /
• pp.178-188
• /
• 2019

When using a distributed system, it is very important to know the intention of a target ship in order to prevent collisions. The action taken by a certain ship for collision avoidance and the action of the target ship it intends to avoid influence each other. However, it is difficult to establish a collision avoidance plan in consideration of multiple-ship situations for this reason. To solve this problem, a Distributed Stochastic Search Algorithm (DSSA) has been proposed. A DSSA searches for a course that can most reduce cost through repeated information exchange with target ships, and then indicates whether the current course should be maintained or a new course should be chosen according to probability and constraints. However, it has not been proven how the parameters used in DSSA affect collision avoidance actions. Therefore, in this paper, I have investigated the effect of the parameters and weight factors of DSSA. Experiments were conducted by combining parameters (time window, safe domain, detection range) and weight factors for encounters of two ships in head-on, crossing, and overtaking situations. A total of 24,000 experiments were conducted: 8,000 iterations for each situation. As a result, no collision occurred in any experiment conducted using DSSA. Costs have been shown to increase if a ship gives a large weight to its destination, i.e., takes selfish behavior. The more lasting the expected position of the target ship, the smaller the sailing distance and the number of message exchanges. The larger the detection range, the safer the interaction.

• Korean Journal of Plant Resources
• /
• v.34 no.4
• /
• pp.339-345
• /
• 2021

'Gondalbi' (Ligularia stenocephala (Maxim.) Matsum. & Koidz.) is the most cultivated Gomchwi species because of higher yield and low in aromatic flavor and bitter taste, But 'Gondalbi' is susceptible to powdery mildew disease and leaf shriveling after harvest in Summer. To improve powdery mildew disease resistance and post-harvest leaf shriveling problem in 'Gondalbi', 'Handeari-gomchwi' resistant to powdery mildew disease and having higher yield potential used as a paternal trait donor. Powdery mildew disease resistance and post-harvest leaf shriveling as well as agronomic performance of a new variety, 'Greenbear' were tested under field and green house conditions in Pyungchang, Korea from 2007 to 2016. Expression of both maternal and paternal characteristics in 'Greenbear' including purple colored petiole ears, glossy leaf and paternal, petiole trichome, absent at the back of a leaf were confirmed. Plant size and flowering time of 'Greenbear' were similar to check line, 'Gommany', while leaf number per plant and yield were higher in 'Greenbear'. 'Greenbear' has thinner leaves (0.66mm) compared to 'Gommany (0.69 mm)', and hardness appeared slightly higher in 'Greenbear(25.1 kg/cm²)'. The resistance to powdery mildew disease of the 'Greenbear' variety was slightly lower than that of the 'Gommany' variety, but somewhat showed high resistance.

• Structural Engineering and Mechanics
• /
• v.76 no.6
• /
• pp.687-708
• /
• 2020

Openings in steel plate shear walls (SPSWs) are usually used for decorative designs, crossing locations of multiple utilities and/or structural objectives. However, earlier studies showed that generating an opening in an SPSW has a negative effect on the cyclic performance of the SPSW. Therefore, this study proposes tripling or doubling the steel-sheet-plate (SSP) layer and stiffening the opening of the SPSW to provide a solution to undesirable opening effects, improve the SPSW performance and provide the infill option of potential strengthening measures after the construction stage. The study aims to investigate the impact of SSP doubling with a stiffened opening on the cyclic behaviour, expand the essential data required by structural designers and quantify the SPSW performance factors. Validated numerical models were adopted to identify the influence of the chosen parameters on the cyclic capacity, energy dissipation, ductility, seismic performance factors (SPF) and stiffness of the suggested method. A finite Element (FE) analysis was performed via Abaqus/CAE software on half-scale single-story models of SPSWs exposed to cyclic loading. The key parameters included the number of SSP layers, the opening size ratios corresponding to the net width of the SSP, and the opening shape. The findings showed that the proposed assembly method found a negligible influence in the shear capacity with opening sizes of 10, 15, 20%. However, a deterioration in the wall strength was observed for openings with sizes of 25% and 30%. The circular opening is preferable compared with the square opening. Moreover, for all the models, the average value of the obtained ductility did not show substantial changes and the ultimate shear resistance was achieved after reaching a drift ratio of 4.36%. Additionally, the equivalent sectional area of the SSP in the twin and triple configuration of the SPSWs demonstrated approximately similar results. Compared with the single SSP layer, the proposed configuration of the twin SSP layer with a stiffened opening suggest to more sufficiency create SSP openings in the SPSW compared to that of other configurations. Finally, a tabular SPF quantification is exhibited for SPSWs with openings.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.4
• /
• pp.313-322
• /
• 2022

The number of architects who adopt BIM(Building Information Modeling) as the design method are gradually increasing because of its productivity and efficiency. Climate Change and Global Warming lead to legislation of new energy regulations and strengthen existing ones. The current architectural design methods (2D CAD) take a lot of time and effort to verify energy codes and are hard to adjust according to the design changes. The purpose of this study is to show the effectiveness of the BIM in building envelop energy modeling of the housing project. In the process of design method change, We could contribute to increasing productivity and efficiency in building energy verification through BIM because the updated value could be calculated simultaneously without information omission or recalculation process. The procedure for the study is as follows. Using BIM of the Goldin at Essex Crosing Housing Project by Revit 2011 as a case model, this study analyze the criteria for energy plan to conform to the energy code in NYC. The result value from the setting of the Revit model is compared with the reference value required by the NYC Energy Code. Finally, the data from BIM are entered into COMckeck, the energy verification program provided by U.S. Department of Energy, to check whether the building envelope energy performance conforms to NYC Energy Code.

• Journal of Plant Biotechnology
• /
• v.49 no.3
• /
• pp.178-186
• /
• 2022

The tetraploid Solanum acaule is a wild potato species from Bolivia widely used for potato breeding because of its diverse attractive traits, including resistance to frost, late blight, potato virus X, potato virus Y, potato leafroll virus, potato spindle tuber viroid, and cyst nematode. However, the introgression of useful traits into cultivated potatoes via crossing has been limited by differences in endosperm balance number between species. Somatic fusion could be used to overcome sexual reproduction barriers and the development of molecular markers is essential to select proper fusion products. The chloroplast genome of S. acaule was sequenced using next-generation sequencing technology and specific markers for S. acaule were developed by comparing the obtained sequence with those of seven other Solanum species. The total length of the chloroplast genome is 155,570 bp, and 158 genes were annotated. Structure and gene content were very similar to other Solanum species and maximum likelihood phylogenetic analysis with 12 other species belonging to the Solanaceae family revealed that S. acaule is very closely related to other Solanum species. Sequence alignment with the chloroplast genome of seven other Solanum species revealed four InDels and 79 SNPs specific to S. acaule. Based on these InDel and SNP regions, one SCAR marker and one CAPS marker were developed to discriminate S. acaule from other Solanum species. These results will aid in exploring evolutionary aspects of Solanum species and accelerating potato breeding using S. acaule.