• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.3
• /
• pp.14-27
• /
• 2020

Pedestrian deaths account for a high percentage of deaths in traffic accidents in Korea, raising interest in pedestrian safety policy. However, since the walk signal time is applied based on the length of the crosswalk without considering the walker and the signal cycle, the walk waiting time is relatively longer than the crosswalk, causing pedestrian jaywalking. In this study, due to an unreasonable signal time plan during a road crossing where a signal is installed, the pedestrian's walk signal was given twice a cycle of crossings, and the operational and safety effects of the signal system were quantitatively and qualitatively analyzed, and the operational effects of the signal interval and jaywalking rate were assessed by different signal intervals. The results showed that jaywalking and waiting time decreased, and the shorter the interval between the application of the walk signal time, the less jaywalking is analyzed. However, there is a risk of vehicle conflict due to pedestrian exposure, and measures for expanding safety for operation were proposed.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.790-795
• /
• 2011

When railway crossing is required to be improved to improve road traffic efficiency, cost-benefits analysis is conducted. In the analysis, such benefits as the reduction of the delay in road vehicle traffic and related costs and reduction of traffic accidents have been appropriately estimated, however, which has not been the case for the reduction of railway operation costs and accidents. This omission may result in a significant difference in the total estimation of the benefits achievable in a long railway line where many of the crossings are improved or reconstructed. This would deteriorate the rationality of the benefit analysis. As the result, although there are various, significant benefits recognizable in the improvement of railway crossings, but they have not been included in the list of the benefits due to the difficulty in calculation. To this end, this paper proposes a methodology of the calculation of the benefits of railway crossing improvement by estimating the unit costs used in the estimation of the benefits obtainable by the reduction of the railway operation costs and the reduction of the accidents at a crossing on the basis of past studies and data.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.5
• /
• pp.1011-1016
• /
• 2001

In this paper, a narrow-band bandpass filter using microstrip open-loop resonators with coupled and crossing lines is designed and fabricated. This filter has many advantages such as compact in size, low weight and the characteristic of the elliptic-function narrow-band bandpass filtering. The configuration consists of two identical microstrip open loop resonators, coupled line and crossing line. By using open loop resonators, the size of the filter can be reduced about 50% compared with the ring resonators. A crossing line gives two notchs in the stopband, which have sharp selectivity in the passband. Centered at 2.455GHz, the calculated microstrip bandpass filter shows a bandwidth of 1.22%, which makes it very attractive for application in the wireless LAN. The filter is fabricated by photo-etching process. The fabricated bandpass filter shows that the bandwidth is 0.85% for 2.458GHz and the size is only $2.6cm\times1cm$.

• Journal of Korean Neurosurgical Society
• /
• v.56 no.1
• /
• pp.5-10
• /
• 2014

Objective : When the pedicle screw insertion technique is failed or not applicable, C7 intralaminar screw insertion method has been used as an alternative or salvage fixation method recently. However, profound understanding of anatomy is required for safe application of the bilaterally crossing laminar screw at C7 in clinic. In this cadaveric study, we evaluated the anatomic feasibility of the bilateral crossing intralaminar screw insertion and especially focused on determination of proper screw entry point. Methods : The C7 vertebrae from 18 adult specimens were studied. Morphometric measurements of the mid-laminar height, the minimum laminar thickness, the maximal screw length, and spino-laminar angle were performed and cross-sectioned vertically at the screw entry point (spino-laminar junction). The sectioned surface was equally divided into 3 parts and maximal thickness and surface area of the parts were measured. All measurements were obtained bilaterally. Results : The mean mid-laminar height was 13.7 mm, mean minimal laminar thickness was 6.6 mm, mean maximal screw length was 24.6 mm, and mean spinolaminar angle was $50.8{\pm}4.7^{\circ}$. Based on the measured laminar thickness, the feasibility of 3.5 mm diameter intralaminar screw application was 83.3% (30 sides laminae out of total 36) when assuming a tolerance of 1 mm on each side. Cross-sectional measurement results showed that the mean maximal thickness of upper, middle, and lower thirds was 5.0 mm, 7.5 mm, and 7.3 mm, respectively, and mean surface area for each part was $21.2mm^2$, $46.8mm^2$, and $34.7mm^2$, respectively. Fourteen (38.9%) sides of laminae would be feasible for 3.5 mm intralaminar screw insertion when upper thirds of C7 spino-laminar junction is the screw entry point. In case of middle and lower thirds of C7 spino-laminar junction, 32 (88.9%) and 28 (77.8%) sides of laminae were feasible for 3.5 mm screw insertion, respectively. Conclusion : The vertical cross-sectioned area of middle thirds at C7 spinolaminar junction was the largest area and 3.5 mm screw can be accommodated with 77.8 % of feasibility when lower thirds were the screw entry point. Thus, selection of middle and lower thirds for each side of screw entry point in spino-laminar junction would be the safest way to place bilateral crossing laminar screw within the entire lamina. This anatomic study result will help surgeons to place the screw safely and accurately.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2001.10a
• /
• pp.89-99
• /
• 2001

Optimum Ship Routing can be defined as “The selection of an optimum track for a transoceanic crossing by the application of long-range predictions of wind, waves and currents to the knowledge of how the routed vessel reacts to these variables”. This paper treats the methodology how to serve optimum ship routing problem by network modeling and reveals the validity of the network model by some numerical experiments.

• Journal of the Korean Institute of Navigation
• /
• v.25 no.3
• /
• pp.211-223
• /
• 2001

Optimum Ship Routing can be defined as \"The selection of an optimum track for a transoceanic crossing by the application of long-range predictions of wind, waves and currents to the knowledge of how the routed vessel reacts to these variables\". This paper treats the methodology how to solve optimum ship routing problem by network modeling and reveals the validity of the network model by some numerical experiments.periments.

• Bulletin of the Korean Chemical Society
• /
• v.12 no.6
• /
• pp.692-698
• /
• 1991

The reaction path Smoluchowski equation approach developed in a recent work to calculate the rate constant for a diffusive multidimensional barrier crossing process is extended to incorporate the configuration-dependent diffusion matrix. The resulting formalism is then applied to the investigation of stilbene photoisomerization dynamics. Adapting a model two-dimensional potential and a model diffusion matrix proposed by Agmon and Kosloff [J. Phys. Chem.,91 (1987) 1988], we derive an eigenvalue equlation for the relaxation rate constant of the stilbene photoisomerization. This eigenvalue equation is solved numerically by using the finite element method. The advantages and limitations of the present method are discussed.

• Journal of Information Technology Services
• /
• v.16 no.4
• /
• pp.223-234
• /
• 2017

The audible pedestrian signal (APS) is an add-on device which connects to the pedestrian signaling device and informs the contents and changes of the signaling by sound. It provides walking direction information of the pedestrian crossing so that the blind people can safely cross the pedestrian crossing. In an intersection where a plurality of audible pedestrian signal (APS) are installed at an intersection crosswalk, existing audible pedestrian signal (APS) operate simultaneously in the communication radius of a wireless remote controller, which may cause confusion for the blind people and the public may complain about the noise. In this paper, we developed a BLE (Bluetooth Low Energy)-based audible pedestrian signal (APS) system capable of supporting two-way communications with a smart-phone that can cross the intersection safely and improve the walking comfort and traffic safety for the blind people. The proposed method is a method in which the BLE beacon communication based audible pedestrian signal (APS) presents active service to the blind people, and the existing audible pedestrian signal (APS) is a way of requesting the passive service by the blind people with the wireless remote control by the unidirectional communication based on 358Mhz. The developed system is installed in the crossroad of Doma-dong, Seo-gu, Daejeon, and it is tested and operated by the blind people. The satisfaction evaluation and analysis of the audible pedestrian signal (APS) for the blind people have good results and are planned to be expanded in the future.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.17 no.4
• /
• pp.106-115
• /
• 2003

In crossing stereo camera system as a security equipment system, a new algorithm for the tracking method of the moving object and the measurement method of distance of the object from cameras to moving object is proposed. The stereo input images are matched by a pixel for the moving object extraction, then the moving elements obtained from an adaptive threshold's value for an error correction and the moving object area extracted by noise eliminative algorithm. In addition to, the moving object traced by control pan/tilt of cameras using a coordinate value of the moving object, and the measurement method of distance to moving object by using special features of the crossing stereo camera system is proposed. From the experimental results, the proposed algorithm was found to be able to measure of the distance and trace for moving object in a stereo security camera system. The error rate of a distance measurement be existed within 6%. Moreover in implementation the proposed algorithm, the stereo security system, the automatic moving robot system and the stereo remote control system will be applied practical application.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.19 no.3
• /
• pp.5-12
• /
• 1982

Through the use of energy ratio of special bandwidths of basic vowels, recognition of Korean basic spoken digit is performed in logical combination with a zero-crossing rate and an energy parameter. In the experiments for recognition of the digits, the speech signal of spoken digits is filtered by a lowpass filter of which the cutoff frequency is 10KHz, and then sampled at 20KHz of sampling rate, In the speech signal processing, we used four FIR digital filters, and the order of filter lengths is 61, 120, 25, 25respectively. The filters are designed by using Remetz exchange algorithm.[13],[14] As a result, the recognition rate of 92% for the three speakers is obstained.