• Title/Summary/Keyword: crossed effect

Search Result 105, Processing Time 0.028 seconds

FLEXURE STRENGTH OF CAST-JOINED CONNECTOR WITH Ni-Cr-Be ALLOY (주조연결된 니켈-크롬-베릴리움 주조체의 굽힘강도에 관한 비교연구)

  • Jeong, Chang-Mo;Jeon, Young-Chan;Lim, Jang-Seop
    • The Journal of Korean Academy of Prosthodontics
    • /
    • v.36 no.6
    • /
    • pp.858-866
    • /
    • 1998
  • Soldering is the usual method used to correct an unstable fixed partial denture framework at patient's try-in; However, presoldering base metal alloys is technique-sensitve and results are unstable because it is difficult to maintain uniform heat distribution and to prevent oxidation of an alloy. A cast-joining technique has been developed by Weiss and Munyon for repair, correction and addition to base metal framework. This joining technique eliminates the problem with presoldering of non-precious frameworks. The object of this study was to 1) compare the relative flexure strength and the joining effectiveness of Ni-Cr-Be cast in two pieces and 'pre-soldered' versus in two pieces and 'cast-joined'. 2) determine the effect of increasing the number of retentive grooves on the face of the cast and 3) determine the effect of the relative matched position of groove patterns on flexure strength. The joining effectiveness can be expressed by the ratio of the mean flexure stress of soldered or cast-joined specimens to that of one-piece cast. Resin rods 3mm in diameter were used as pattern of specimens for one-piece casted, presoldered, and cast-joined groups. Cast-joined specimens had two different patterns of retentive grooves on the joined faces. Type A had cross-shaped grooves 1mm in depth. 0.6mm in width. Type B was the same except for the addition of one more retentive groove. In the experiment connecting cast-joined specimens, half of specimens with type A pattern had their patterns on the faces of paired casts matched with each other as mirror image. With the rest pairs, it was proceeded that one of paired casts turned 45 degrees so that the patterns crossed. Half of specimens with type B pattern also had the patterns matched as mirror image; However, here, one of paired casts turned 90 degrees with the other pairs. Retentive groove in this study lacked the intentional undercuts, in contrast with the suggestion of Weiss and Munyon. The specimens were subjected to four-point flexural loading in an Instron testing machine. The midspan flexural stress was calculated at the point of initial plastic strain as determined from a strip-chart recorder or at the point of failure if this occured at a lower stress level. Within the scope of this study, the following results were obtained. 1. The presoldered group showed flexural strength at least 2 times higher than the cast-joined groups. Its joining effectiveness was 82%. 2. In cast-joined groups, the flexural strength of joints with type B patterns exhibited 1.5 times that of joints with type A patterns. Joining effectivenesses were 38% for type B patterns, 25-26% for type A patterns. 3. The relative matched position of groove patterns did not have any significant effect on flexural strength of the cast-joined specimens with either type A patterns or type B patterns(p>.05).

  • PDF

The Effect of High Environmental Temperature and Nutrient Density on Pig Performance, Conformation and Carcass Characteristics under Restricted Feeding System

  • Hsia, L.C.;Lu, G.H.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.17 no.2
    • /
    • pp.250-258
    • /
    • 2004
  • An experiment was conducted to examine the effect of a high environmental temperature on the performance, conformation, and carcass characteristics of pigs and the influence of diet. Thirty-six three-way crossed castrated male pigs with average initial body weight of 50.4 kg were used in the experiment. The pig were allocated to the following treatments: two environmental temperatures (20 and $30^{\circ}C$)${\times}$three dietary energy levels (2,980, 3,300 and 3,600 kcal/kg)${\times}$three protein levels (12.8, 15.2 and 17.2%). Daily weight gain was lighter (p<0.01) and feed: gain ratio lower (p<0.05) in pigs at $30^{\circ}C$ than for pigs at $20^{\circ}C$ The pigs at $30^{\circ}C$ were significantly taller with deeper bodies (p<0.05) and significantly longer (p<0.05) both vertically horizontally in the planum nasal when kept at $30^{\circ}C$. The width of body and the circumference of the neck were greater (p<0.05) at $20^{\circ}C$. The lean meat of the loin, middle section, ham, and hind section were significantly greater (p<0.05) in pigs kept at $30^{\circ}C$ and the belly was significantly heavier. The total unsaturated free fatty acids were significantly higher (p<0.05) in the body fat of pigs kept at $20^{\circ}C$ than in that of pigs at $30^{\circ}C$. The results indicated that when pigs are given very restricted same amounts of feed, they may need less energy to maintain their body temperature under moderately high environmental temperature ($30^{\circ}C$); consequently, their performance is better than that of pigs under optimum environmental temperature. The results showed very clearly that weight gain of pigs increased with increasing of dietary protein and energy content. The increasing of dietary protein content seemed more significant when content increasing to 17.2% compared with the 12.8 and 15.2% protein content treatments. The increasing of dietary energy content was more significant when content increasing to 3,600 compared with the other low energy content treatments.

Ideology, Politics, and Social Science Scholarship on the Responsibility of Intellectuals

  • Koerner, E.F.K.
    • Lingua Humanitatis
    • /
    • v.2 no.2
    • /
    • pp.51-84
    • /
    • 2002
  • The 1990s have seen the publication of many books devoted to Language and Ideology (cf. Joseph & Taylor 1990. for one of the early ones) even though the term 'ideology' itself has remained ill-defined (Woolard 1998). The focus of attention has usually been placed on the particular use of language and often for some kind of 'political' ends, not on linguistic or other scholarship which might have been driven by some sort of ideology, i.e., a bundle of assumptions which themselves were taken as given. At least since Edward Said's 1978 book Orientalism, it has been clear to everyone that scholars construct their conceptualization of things in line with their understanding of the cultural, social, and political world in which they live, and that this often unreflected 'pre-understanding' effects their view of cultures that are different from theirs and more often than not geographically and temporally distant from theirs. This recognition has had a sobering effect no doubt, and Said's book has long since become 'mainstream.' Much more disturbing to the scholarly profession has been the publication of Martin Bernal's Black Athena in 1987, since it went much further, going beyond accusations of colonialism and cultural bias, in suggesting that the Western representation of Classical Greece over the past two hundred years was false and that what had been accepted until now about occidental antiquity must now be seen derived from African-Asiatic cultures of the Near East, notably that of the Ancient Egyptians, and that no other than Socrates should be seen as black man. While we may understand the intellectual climate in the United States that led academics to present 'myth as history' (Lefkowitz 1996), it is obvious that lines of regular scholarly principles of investigation have been crossed (cf Lefkowitz & Rogers 1996). The present paper investigates what may be seen as the ideological underpinnings of such work. After reviewing some recent scholarship in the area of linguistic historiography that have shown that academic work has never been 'value-neutral' (as may have been assumed or has been claimed by some practitioners), it is argued that in effect one must be aware of what Clemens Knobloch has recently termed Resonanzbedarf, i.e., the desire, whether conscious or not, of scholars-and probably scientists, too-to have their work recognized by the educated public and that, in so doing, their discourses tend to pick up on contemporary popular notions. These efforts may be harmless if everyone was to recognize these allusions and adoption of certain lexical. items(buzz words) as props or what Germans call Versatzstiicke, but history tells us that this has not always been the case. Still, as Hutton (1999) has shown, not all scholarship during the Third Reich for example can simply be dismissed as worthless because it was conducted in under a prevailing political ideology. Indeed, in seemingly innocent times, linguists can be shown to frame their argument in a way that makes them appear so utterly superior to their predecessors (cf. Lawson 2001). Upon closer inspection, those discourses turn out to be much like those of scholars in nationalistic environments that have tended to select their 'facts' to prove a particular hypothesis (cf., e.g., Koerner 2001). The article argues for scholars to take a more active role in exploding myths, scientifically unfounded claims, and ideologically driven distortions, especially those that are socially and politically harmful.

  • PDF

Vitamins A and E in Carcass Fat from Japanese Black and F1 Cross Cattle

  • Irie, Masakazu;Inno, Y.;Ishizuka, Y.;Nishioka, T.;Morita, T.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.19 no.9
    • /
    • pp.1266-1270
    • /
    • 2006
  • This study was carried out to determine the contents of vitamins A and E in carcass fat from Japanese Black and F1 cross cattle, because the method of controlling the amount of vitamin A in feed has been used in the production of expensive beef with high marbling in Japan. We determined the contents of tocopherol and retinol in subcutaneous and perirenal fats for 40 carcasses of Japanese Black and F1 (Holstein${\times}$Japanese Black crossed) cattle that had been sent to market from 10 prefectures. In bovine fat, free ${\alpha}$-tocopherol was present in the greatest amount, the level of ${\gamma}$-tocopherol was about 10% and there was only a trace of ${\delta}$-tocopherol. The means${\pm}$standard deviation of ${\alpha}$-tocopherol content in subcutaneous and perirenal fats were $0.68{\pm}0.33mg/100g$ and $0.54{\pm}0.23mg/100g$, respectively. The means${\pm}$standard deviation of retinol content in subcutaneous and perirenal fats were $2.9{\pm}4.5{\mu}g/100g$ and $2.9{\pm}5.1{\mu}g/100g$, respectively. Both vitamins differed widely between animals and were present at a relatively low level compared to other reports (${\alpha}$-tocopherol 2.4-5.4 mg/100 g fat tissue and $30-220{\mu}g/100g$ muscle tissue). The correlation coefficients between subcutaneous and perirenal fats for retinol and ${\alpha}$-tocopherol content were 0.97 (p<0.01) and 0.82 (p<0.01), respectively, which showed high correlation. However, the correlation coefficients between retinol and ${\alpha}$-tocopherol contents for subcutaneous and perirenal fats were 0.11 and 0.08, respectively, which showed low correlation. Breed effect was observed in both vitamins. These results indicated that vitamins A and E in fat from Japanese Black and F1 cross cattle under the vitamin A controlling method are present at relatively low levels and feeds need to be supplemented with vitamin E.

Effect of Ginseng on the acquisition of conditioned avoidance response in rats (인삼이 흰쥐의 조건회피반응 습득에 미치는 영향)

  • Hong, Sa-Ack;Park, Chan-Woong;Chang, Hyoun-Kab
    • The Korean Journal of Pharmacology
    • /
    • v.12 no.1
    • /
    • pp.63-67
    • /
    • 1976
  • The purpose of the present study was to see the Panax Ginseng has any influence upon the acquisition of the conditioned avoidance response(CAR) in rats. Sixty male rats of Holtsman strain were used. The animal weighed between 20 and 300 gm at the beginning of the experiment. Training of avoidance conditioning was done in a two-way shuttle box which was separated into two compartments by a guilotine door. The conditioned stimulus (CS) was a light beam and the unconditioned stimulus (UCS) was an electric shock. The shock was presented 10 sec. after onset of the CS and continued until the subject crossed to the opposite safety compartment within 20 sec. after onset of UCS. Each S was received 30 trials a day (one session) for 6 consecutive sessions. The number of CR which avoided successfully without having shock and the number of fecal balls during the conditioning were served as an index of learning performance and emotionality. The results obtained as follows. All doses of Ginseng saponin treated animals showed more CR than control, but did not differ significantly from control. Ginseng saponin treated animals with the doses of $50{\sim}100\;mg/kg$ defecated the fecal balls significantly less frequent than the placebo control during CAR.

  • PDF

A Study on the Contact Resistance according to the Tightening and Overlapping area of Bus Bar (부스 바의 체결 및 중첩 구간에 따른 접촉 저항에 관한 연구)

  • Kim, Hyun-Woo;Son, Yung-Deug
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.19 no.7
    • /
    • pp.56-62
    • /
    • 2018
  • The bus bar is an electrical connection widely used for the power supply of skyscrapers and power distribution and industrial equipment electrical panels in industrial plants. There are various materials to be considered in the design of the bus bar, such as material based on the use environment, the sectional area according to the power capacity, the length of the surface circumference, and the tightening method. Even with a bus bar manufactured to a size of sufficient power capacity in the design, if the actual tightening is incorrect, it may lead to fire due to deterioration. For these reasons, a variety of research on the temperature rise of the electrical contact point has continued. However, the temperature rise of the contacts is a consequence of the result, not a direct cause. In this paper, the influence of contact resistance on the fastening force and the overlapping section of the bus bar are investigated by measuring the change in resistance from building the specimen. A total of eight bus bar specimens were manufactured and measured. Resistance was measured by varying the clamping force and the interval between overlapping sections when the specimens were crossed. We propose a safe power connection model by analyzing the contribution of these factors to the actual contact resistance change.

Studies on Phosphorus-32 Labeling of the House Fly ( I ) (Phosphorus-32에 의한 집파리의 표식효과 (I))

  • Ryu J.;Chung K. H.;Kwon S. H.;Kim H. W.
    • Korean journal of applied entomology
    • /
    • v.13 no.2 s.19
    • /
    • pp.93-97
    • /
    • 1974
  • This paper describes experiments made to develop a technique for marking insects and get the informations for ecological studies as a means of tagging flies with radioactive phosphorus, and also to learn the effect on the subsequent generation of flies. Tests were conducted with house flies, Musca domestica L. emerged front the larvae that had reared in a media containing various concentrations of P-32. Radioactivity of the flies was measured with end-window type $(2mg/cm^2)$ Geiger-Muller counter and proportional counter made by Aloka. In following the daily increases in counting rates by 6-day-old larvae it was apparent the larvae in the starting media containing the higher concentrations of P-32 were showing high counting rates. It was found that about 13.2 per cent of the radioactive material remained in the empty puparia after the flies emerged. Radioactivity of the emerged flies decreased gradually and the biological halflife of phosphorus-32 was approximately 6.14 days with considerable variation. A significant amount of P-32 were detected in the abdominal and thoracic sections as compared with other parts of adult. The activity of phosphorus·32 in eggs and larvae produced by adults reared in medium containing 0.2 microcurie or more of P-32 per gram were readily detected with Geiger-Mi·lier counter. On the other hand, the radioactivity of eggs and larvae produced by the treated males crossed with untreated normal females could be only detected in the medium containing more of 2.0 microcurie with G.M. counter. There was no apparent damage to the flies at dosages as high as 0.5 microcurie per gram of medium. For field studies a concentration of 0.5 microcurie of P-32 per gram of artificial medium appears to give adequate labeling for positive identification of flies and their egg masses.

  • PDF

Effect of implant- and occlusal load location on stress distribution in Locator attachments of mandibular overdenture. A finite element study

  • Alvarez-Arenal, Angel;Gonzalez-Gonzalez, Ignacio;deLlanos-Lanchares, Hector;Martin-Fernandez, Elena;Brizuela-Velasco, Aritza;Ellacuria-Echebarria, Joseba
    • The Journal of Advanced Prosthodontics
    • /
    • v.9 no.5
    • /
    • pp.371-380
    • /
    • 2017
  • PURPOSE. The aim of this study is to evaluate and compare the stress distribution in Locator attachments in mandibular two-implant overdentures according to implant locations and different loading conditions. MATERIALS AND METHODS. Four three-dimensional finite element models were created, simulating two osseointegrated implants in the mandible to support two Locator attachments and an overdenture. The models simulated an overdenture with implants located in the position of the level of lateral incisors, canines, second premolars, and crossed implant. A 150 N vertical unilateral and bilateral load was applied at different locations and 40 N was also applied when combined with anterior load at the midline. Data for von Mises stresses in the abutment (matrix) of the attachment and the plastic insert (patrix) of the attachment were produced numerically, color-coded, and compared between the models for attachments and loading conditions. RESULTS. Regardless of the load, the greatest stress values were recorded in the overdenture attachments with implants at lateral incisor locations. In all models and load conditions, the attachment abutment (matrix) withstood a much greater stress than the insert plastic (patrix). Regardless of the model, when a unilateral load was applied, the load side Locator attachments recorded a much higher stress compared to the contralateral side. However, with load bilateral posterior alone or combined at midline load, the stress distribution was more symmetrical. The stress is distributed primarily in the occlusal and lateral surface of the insert plastic patrix and threadless area of the abutment (matrix). CONCLUSION. The overdenture model with lateral incisor level implants is the worst design in terms of biomechanical environment for the attachment components. The bilateral load in general favors a more uniform stress distribution in both attachments compared to a much greater stress registered with unilateral load in the load side attachments. Regardless of the implant positions and the occlusal load application site, the stress transferred to the insert plastic is much lower than that registered in the abutment.

Effect of Partial Replacement of Green Grass by Urea Treated Rice Straw in Winter on Milk Production of Crossbred Lactating Cows

  • Sanh, M.V.;Wiktorsson, H.;Ly, L.V.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.15 no.4
    • /
    • pp.543-548
    • /
    • 2002
  • Fresh elephant grass was replaced by urea treated rice straw (UTRS) to evaluate the effects on milk production of crossed lactating cows. A total of 16 crossbred F1 cows (Holstein Friesian ${\times}$ Vietnamese Local Yellow), with a body weight of about 400 kg and lactation number from three to five, were used in the experiment. The experimental cows were blocked according to the milk yield of the previous eight weeks and divided into 4 homogenous groups. The experiment was conducted with a Latin Square design with 4 treatments and 4 periods. Each period was 4 weeks, with 2 weeks of feed adaptation and 2 weeks for data collection. The ratio of concentrate to roughage in the ration was 50:50. All cows were given constant amounts of elephant grass dry matter (DM), with ratios of 100% grass without UTRS (control treatment 100G), and 75% grass (75G), 50% grass (50G) and 25% grass (25G) with ad libitum UTRS. Daily total DM intake on 100G, 75G, 50G and 25G was 12.04, 12.31, 12.32 and 11.85 kg, and the daily ME intake was 121.6, 121.5, 119.4 and 114.3 MJ, respectively. The daily CP intake was similar for all treatments (1.85-1.91 kg). There was a difference (p<0.05) in daily milk yield between the 25G and the 100G and 75G (11.7 vs. 12.6 and 12.5 kg, respectively). Milk protein concentration was similar for all treatments, while a tendency to increased milk fat concentration following the increase of UTRS ratio was observed. The cows gained 4-5 kg body weight per month and showed first oestrus 3-4 months after calving. The overall feed conversion for milk production was not affected by ratio of UTRS in the ration. It is concluded that replacement of green grass by UTRS with a ratio of 50:50 for crossbred lactating cows is as good as feeding 100% green grass in terms of milk yield, body weight gain and feed conversion. UTRS can preferably replace green grass in daily rations for crossbred dairy cows in winter to cope with the shortage of green grass, with the ratio 1:1.

Criterion Suggestion on Relative Disparity, Viewing Distance and Viewing Angle to Minimize 3D Visual Fatigue for Pattern-Retarded Type 3D Display (편광식 3D 디스플레이를 위한 상대적 시차, 시청 거리, 시청 방위에서의 시각피로 최소화 기준 제안)

  • Park, Jong-Jin;Kim, Shinwoo;Li, Hyung-Chul O.
    • Science of Emotion and Sensibility
    • /
    • v.19 no.1
    • /
    • pp.61-70
    • /
    • 2016
  • 3D visual fatigue is known as one of the most important factors that interfere the commercial success of 3D contents. Vergence-accommodation conflict, which is known to occur when an observer watches an image containing binocular disparity presented on a 3D display, has been suggested as a major cause of 3D visual fatigue. This implies that any image incorporating binocular disparity might cause 3D visual fatigue. In order to reduce 3D visual fatigue, it would be necessary to consider indirect ways of reducing 3D visual fatigue as well as eliminating the direct causes of 3D visual fatigue. We have examined the effect of the variables that are expected to affect subjective 3D visual fatigue and these variables included the relative disparity contained in an image, viewing distance and viewing angle. We have also figured out the proper levels of the variables required to minimize 3D visual fatigue. The results indicate that observers began to report significant 3D visual fatigue when the crossed disparity contained in an image exceeded 7.22' and the vertical viewing angle was larger than 15 degree.