• Journal of KIISE:Information Networking
• /
• v.32 no.2
• /
• pp.244-253
• /
• 2005

In this paper, a performance evaluation model of the switch router with the multiple-buffered crossbar switches is proposed and examined. Buffered switch technique is well known to solve the data collision problem of the crossbar switch. The proposed evaluation model is developed by investigating the transfer patterns of data packets in a switch with output-buffers. The performance of the multiple-buffered crossbar switch is analyzed. Steady state probability concept is used to simplify the analyzing processes. Two important parameters of the network performance, throughput and delay, are then evaluated. To validate the proposed analysis model, the simulation is carried out on a network that uses the multiple buffered crossbar switches. Less than $2\%$ differences between analysis and simulation results are observed. It is also shown that the network performance is significantly improved when the small number of buffer spaces is given. However, the throughput elevation is getting reduced and network delay becomes increasing as more buffer spaces are added in a switch.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.2 s.332
• /
• pp.65-72
• /
• 2005

We can integrate more IP blocks on a silicon die as the development of fabrication technologies and EDA tools. Consequently, we can design complicated SoC architecture including multi-processors. However, most of existing SoC buses have bottleneck in on-chip communication because of shared bus architectures, which result in the performance degradation of systems. In most cases, the performance of a multi-processor system is determined by efficient on-chip communication and the well-balanced distribution of computation rather than the performance of the processors. We propose an efficient SoC Network Architecture(SNA) using crossbar routers which provide a solution to ensure enough communication bandwidth. The SNA can significantly reduce the bottleneck of on-chip communication by providing multi-channels for multi-masters. According to the proposed architecture, we design a model system for the SNA. The proposed architecture has a better efficiency by $40\%$ than the AMBA AHB according to a simulation result.

• Journal of Electrical Engineering and information Science
• /
• v.2 no.6
• /
• pp.74-81
• /
• 1997

Xcent-Net is a new system network designed to support a clustered SMP called SPAX(Scalable Parallel Architecture based on Xbar) that is being developed by ETRI. It is a duplicated hierarchical crossbar network to provide the connections among 16 clusters of 128 nodes. Xcent-Net is designed as a packet switched, virtual cut-through routed, point-to-point network. Variable length packets contain up to 64 bytes of data. The packets are transmitted via full duplexed, 32-bit wide channels using source synchronous transmission technique. Its plesiochronous clocking scheme eliminates the global clock distribution problem. Two level priority-based round-robin scheme is adopted to resolve the traffic congestion. Clear-to-send mechanism is used as a packet level flow control scheme. Most of functions are built in Xcent router, which is implemented as an ASIC. This paper describes the architecture and the functional features of Xcent-Net and discusses its implementation.

• Journal of Communications and Networks
• /
• v.15 no.6
• /
• pp.614-634
• /
• 2013

The proliferation of real-time multimedia services requires huge amounts of data transactions demanding strict quality-of-service (QoS) guarantees. Multicast transmission is a promising technique because of its efficient network resource utilization. However, high head-of-line (HOL) blocking probability and lack of service-specific QoS control should be addressed for practical implementations of multicast networks. In this paper, a topology aware fanout set division (TAFD) scheme is proposed to resolve these problems. The proposed scheme is composed of two techniques that reduce HOL blocking probability and expedite packet delivery for large-delay branches regarding multicast tree topology. Since management of global topology information is not necessary, scalability of the proposed scheme is guaranteed. Mathematical analysis investigates effects of the proposed scheme and derives optimal operational parameters. The evaluation results show that the TAFD scheme achieves significant delay reduction and satisfies required delay bounds on various multicast networks.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.11
• /
• pp.56-65
• /
• 2009

As increasing the number of IPs integrated in a single chip and requiring high communication bandwidth on a chip, the trend of SoC communication architecture is changed from bus- or crossbar-based architecture to packet switched network architecture, NoC. However, highly complex control logics in routers require multiple cycles to switch packet. In this paper, we design low complex router to improve the communication latency. Our NoC design is verified by simulation platform modeled by ESL tool, SoC Designer. We also evaluate our NoC design comparing to the previous NoC architecture based on VC router. Our results show that our NoC architecture has less communication latency, even small throughput degradation (about 1-2%).

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.991-992
• /
• 2006

Multiprocessor system is efficient and high performance architecture to overcome a limitation of single core SoC. In this paper, we propose a multiprocessor SoC (MPSoC) architecture which provides the low complexity and the high performance. The dynamic routing scheme has a serious problem in which the complexity of routing increases exponentially. We solve this problem by making a cluster with several PEs (Processing Element). In inter-cluster network, we use deterministic routing scheme and in intra-cluster network, we use dynamic routing scheme. In order to control the hierarchical network, we propose efficient router architecture by using smart crossbar switch. We modeled 2-D mesh topology and used simulator based on C/C++. The results of this routing scheme show that our approach has less complexity and improved throughput as compared with the pure deterministic routing architecture and the pure dynamic routing architecture.

• The KIPS Transactions:PartC
• /
• v.9C no.1
• /
• pp.65-72
• /
• 2002

In this paper, we implement a high-speed swatch tilth the function for label integration to enhance the expansion of networks using the label space of routers efficiently on MPLS over ATM networks. We propose an appropriate hardware structure to support the VC-merge function and differentiated services simultaneously. In this paper, we use the adaptive congestion control method such as EPD algorithm in carte that there is a possibility of network congestion in output buffers of each core LSR. In addition, we justify the validity of the proposed VC-merge method through simulation and comparison to conventional Non VC-merge methods. The proposed VC-merge capable switch is modeled in VHDL. synthesized, and fabricated using the SAMSUNG 0.5um SOG process.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.4
• /
• pp.24-31
• /
• 2007

Up to date, a lot of bus protocol and bus architecture are released though most of them are based on the shared bus architecture and inherit the limitation of performance. SNP (SoC Network Protocol), and hence, SNA (SoC Network Architecture) which are high performance on-chip-bus protocol and architecture, respectively, have been proposed to solve the problems of the conventional shared bus. We refine the SNA specification and improve the performance and functionality. The performance of the SNA is improved by supporting simultaneous routing for bus request of multiple masters. The internal routing logic is also improved so that the gate count is decreased. The proposed SNA employs XSNP (extended SNP) that supports almost perfect compatibility with AMBA AHB protocol without performance degradation. The hardware complexity of the improved SNA is not increased much by optimizing the current routing logic. The improved SNA works for IPs with the original SNP at its best performance. In addition, it can also replace the AMBA AHB or interconnect matrix of a system, and it guarantees simultaneous multiple channels. That is, the existing AMBA system can show much improved performance by replacing the AHB or the interconnect matrix with the SNA. Thanks to the small number of interconnection wires, the SNA can be used for the off-chip bus system, too. We verify the performance and function of the proposed SNA and XSNP simulation and emulation.

• Journal of KIISE:Computer Systems and Theory
• /
• v.33 no.8
• /
• pp.554-561
• /
• 2006

In recent years, as SoC design research is actively conducted, a large number of IPs are included in a system. Various bus protocols and bus architectures are designed to increase IP reusability. Among them, the AMBA AHB became a de facto standard although it is somewhat inadequate for a large scale SoC. We proposed SNP and SNA, high performance on-chip-bus protocol and architecture, respectively, to solve the problem of the conventional shared buses. However, it seems to be imperative that the new on-chip-bus system support AMBA-compatible IPs for a while since there are a lot of IPs with AMBA interface. In this paper, we propose an extended SNP specification and a corresponding SNA component to support ABMA-compatible IPs used in SNA - based system. We extend the phase of the SNP by 1 bit to add new 8 phases to support communication based on AMBA protocol without penalty of elongated cycle latency. The ARB-to -XSNP converter translates the protocol between AHB and SNP to attach AMBA -compatible IPs to SNA based system. We show that AMBA IPs can communicate through SNP without any degradation of performance using the extended SNP and AHB - to- XSNP converter.