• Proceedings of the Korean Geotechical Society Conference
• /
• 2001.03a
• /
• pp.167-174
• /
• 2001

Reflection method using ultrasonic source has been attempted to obtain the information about tunnel lining structures composed of lining, shotcrete, water barrier and voids at the back of lining. In this work, two different types of sources, i.e. single-pulse source and sweep source, can be used. Single-pulse source with short time duration has the frequency content whose amplitudes tend to be concentrated around the dominant frequency, whereas sweep source with long time duration denotes a flat distribution of relatively larger amplitude over a broad frequency band, although the peak to peak amplitude of single-pulse source wavelet is equivalent to that of sweep source one. In traditional seismic application, a single-pulse source(weight drop, dynamite) is typically used. However, to investigate the fine structure, as it is the case in the tunnel lining structure, the sweep wavelet can be also a desirable source waveform primarily due to the higher energy over a broad frequency band. For the investigation purposes of sweep source, a physical modeling is a useful tool, especially to study problems of wave propagation in the fine layered media. The main purpose of this work was using a physical modeling technique to explore the applicability of sweep source to the delineation of inner layer boundaries. To this end, a two-dimensional physical model analogous to the lining structure was built and a special ultrasonic sweep source was devised. The measurements were carried out in the sweep frequency range 10 ∼ 60 KHz, as peformed in the regular reflection survey(e.g. roll-along technique). The measured data were further rearranged with a proper software (cross-correlation). The resulting seismograms(raw data) showed quitely similar features to those from a single-pulse source, in which high frequency content of reflection events could be considerably emphasized, as expected. The data were further processed by using a regular data processing system "FOCUS" and the results(stack section) were well associated with the known model structure. In this context, it is worthy to note that in view of measuring condition the sweep source would be applied to benefit the penetration of high frequency energy into the media and to enhance the resolution of reflection events.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.10
• /
• pp.6141-6145
• /
• 2013

Background: The objective of the study was to determine the knowledge, attitude and behaviors of the practicing dentists regarding tobacco cessation counseling (TCC) in Chhattisgarh state and also the barriers that prevent them from doing so. Materials and Methods: The study was conducted among dental practitioners of Raipur district, Chhattisgarh state (India). The sampling frame was registration with the State Dental Council and practicing in Raipur district. A questionnaire was personally administered and the practitioners were given explanations regarding how to complete it. Only descriptive statistics were calculated (SPSS version 16 for Windows). Results: Based on the responding dentists' self reports, 76% were not confident in TCC, 48% did not assume TCC to be their responsibility, 17% considered that it might have a negative impact on their clinical practice, whereas 24% considered it might take away precious time from their practice, 25% considered TCC by dentists to be effective to a considerable extent and 80% considered TCC activities are not effective due to lack of formal training, 69% considered dental clinics as an appropriate place for TCC but 82% thought there must be separate TCC centre and 100% of the dentists wanted TCC training to be a part of practice and that it should be included in dental curriculum. Some 95% of them were of the view that tobacco products should be banned in India and 86% responded that health professionals must refrain from tobacco habits so to act as role models for society. Conclusions: Dental professionals must expand their armamentarium to include TCC strategies in their clinical practice. The dental institutions should include TCC in the curriculum and the dental professionals at the primary and the community health care level should also be trained in TCC to treat tobacco dependence.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.9
• /
• pp.435-445
• /
• 2018

This study analyzed factors that should be considered in the process of export diversification strategy formulation and priorities of strategies. We reviewed the extant literature and interviewed six experts. Cross-sectional analysis of a literature review and interview results were used to determine the influencing factors of export. The data for this study were collected from a survey of 68 export experts in Automotive Parts enterprises. Data were analyzed using AHP. As a result of the analysis, the order of importance appeared in the order of internal capacity, correlation buyer effect, entry barriers, technology response, and competition environment. The regions with a high overseas level were product differentiation, centralization, and low cost, whereas those with a low level were in the order of low cost, product differentiation, and concentration. It is meaningful to review the alternatives for adoption of the export diversification strategy and establish a strategy appropriate to the situation. It is necessary to establish a customized strategy considering the characteristics of the global region, and not only internal competence but also mutual relationship with local buyers are important.

• Journal of Korean society of Dental Hygiene
• /
• v.17 no.6
• /
• pp.1013-1024
• /
• 2017

Objectives: The study investigated health professionals working in the metropolitan area and Jeolla-bukdo, South Korea, from April 30 to May 17, 2017 to understand their views on the issue of including dental hygienists in the scope of medical personnel of South Korea. Methods:A total of 270 surveys were analyzed in this study. The survey consists of 5 questions on general issues; 10 on the awareness of present work of dental hygienist; and 1 on opposition or approval about including dental hygienist in medical personnel. The collected data were analyzed using SPSS for Windows 18.0, as well as frequency analysis, cross analysis and logistic regression analysis. Statistical significance level (${\alpha}$) is 0.05. Results: 1. Broken down by gender, male subjects showed more oppositions against including dental hygienists in the category of medical personnel while female subjects showed more favorable opinions (p<0.05). In terms of academic background, those who had graduated from graduate school or higher showed a higher propensity for opposition while those who had graduated from a 3-year college showed a higher tendency for approval on the idea (p<0.05), In terms of occupational type, health professionals showed more opposing views whereas medical technologists showed more approvals than others (p<0.001). 2. With respect to the awareness of work specialty and proficiency of dental hygienist according to general characteristics, the higher the age, the higher the awareness level was. In terms of the occupational type, medical technologists were found to have higher awareness level than health professionals (p<0.001). 3. With respect to the relationship between general characteristics and view on including dental hygienists in medical personnel, the occupational type of health professional was found to have 6.33 times more oppositions than medical technologists. When the awareness level on proficiency of dental hygienist was low, opposition was 6.52 times more frequent (p<0.05). Conclusions: Based on the findings above, the inclusion of dental hygienists in medical personnel seems necessary in properly establishing the specialty and role of dental hygienist in the dentist medical environment of the country in order to enhance national oral health related preventive dental service and expand the demand. To this end, it is necessary to provide nationwide promotion, work to change the awareness of health professionals in other occupational types, and facilitate public promotion for legal ground establishment.

• Journal of Korean Society of Steel Construction
• /
• v.15 no.3
• /
• pp.321-329
• /
• 2003

To effectively use the cross section of concrete decks, analytical and experimental studies on prestressed steel-box-girder bridges were performed in this study. The method of applying prestress was determined in the analytical study and the longitudinal behavior of the prestressed steel-box-girder bridge was considered in the experimental study. The object model for these studies was a two-span continuous bridge. The method of applying prestress determined herein was divided into two parts: one is that apply prestress to the concrete deck at its intermediate support, and the other is that apply prestress to the lower flange of the steel-box-girder bridge at its end support. The prototype bridge for the experiment was simulated based on the rule of similitude and was fabricated according to construction steps to apply prestress effectively. From the results of the experimental study, it has demonstrated that the prestressed steel-box-girder bridge provides better performance than the general steel-box-girder bridge in view of the increase of the design live load, the reduction of the tensile stress of the concrete deck at intermediate support, and the reduction of the displacement.

• Journal of Broadcast Engineering
• /
• v.19 no.1
• /
• pp.31-43
• /
• 2014

A depth map is an important component for stereoscopic image generation. Since the depth map acquired from a depth camera has a low resolution, upsamling a low-resolution depth map to a high-resolution one has been studied past decades. Upsampling methods are evaluated by objective evaluation tools such as PSNR, Sharpness Degree, Blur Metric. As well, the subjective quality is compared using virtual views generated by DIBR (depth image based rendering). However, works on the analysis of the relation between depth map upsampling and stereoscopic images are relatively few. In this paper, we investigate the relationship between subjective evaluation of stereoscopic images and objective performance of upsampling methods using cross correlation and linear regression. Experimental results demonstrate that the correlation of edge PSNR and visual fatigue is the highest and the blur metric has lowest correlation. Further, from the linear regression, we found relative weights of objective measurements. Further we introduce a formulae that can estimate 3D performance of conventional or new upsampling methods.

• Korean Journal of Health Education and Promotion
• /
• v.19 no.4
• /
• pp.77-97
• /
• 2002

Since growth promotion was defined by Koch(1935), many researches like Benholdt and Thomsen(1942) have conducted studies for understanding problem of puberty growth. Growth promotion means that growth is developed in puberty, and several researchers have reported that the more becomes economic growth, the more becomes growth promotion. Thereupon, this study was attempted to find Maximum Growth Age(M.G.A.), as an index of height growth promotion in Korea, which was obtained by longitudinal observations of the same group. Thus, this study can explain the earlier tendency of growth. To investigate domestic changes in M.G.A., M.G.A. was calculated with the results of cross-sectional researchs using 25 representative papers between 1940-1953 including measurements by Lee(1940) and data by Kim(1953) in this study. Based on the research data published between 1940 and 2000, height and M.G.A. of males and females who were born between 1925 and 1983 were gotten by years, and a trend of growth promotion for height in Koreans was suggested by examining study subjects. Findings of this study are as follows; 1. M.G.A. for height decreased both in males and females; for males, 14.28 years in 1940, 14.24 in 1953, 13.86 in 1967, 12.74 in 1985, and 11.71 in 2000; for females, 12.0 in 1940, 11.52 in 1965, 10.00 in 1978 and 9.77 in 2000. 2. Regression equations and standard errors of estimate concerning M.G.A. for height by years were obtained; for males, Y$_1$(M.G.A.) = 17.21 - 0.059X$_1$, S$_{Y1X1}$(standard error of estimate about the regression line) = ${\pm}$0.62; for females, Y$_2$(M.G.A.) = 13.81-0.042X$_2$, S$_{Y2X2}$(standard error of estimate about the regression line) = ${\pm}$0.64 3. As a result of finding correlation between year and M.G.A. r=-0.763 (p<0.001) for male and r=-0.699(p<0.001) for female were obtained 4. From a view that the growth promotion has been continued before 2000, M.G.A. decreased 0.6 years for male and 0.4 for female per 10 years. 5. M.G.A. for height is as shown in Table 2. 6. It is thought that the future trend of growth promotion for height will follow the progress from 1940s to now. It shall be reviewed again after development of coming several years is investigated.

• Journal of Families and Better Life
• /
• v.26 no.2
• /
• pp.115-127
• /
• 2008

The purpose of this study was to examine the characteristics of change in the composition of indoor spaces in Korean-style houses which have been repaired and improved extensively through the 'Bukchon Improvement Project' and are being utilized for public purposes. For this, we conducted a field survey through visiting the house sites from the 5th to the 26th of May, 2006. Conclusions drawn from this study are as follows. Bukchon Korean-style houses maintain centripetal space composition, in which the rooms surround the court. Centering on the court, the hierarchy of spaces is determined, and the hierarchy of spaces and the composition of internal layout are restructured centering on the court and the main hall without change in direction and position. The main hall is sometimes converted to a room, but it maintains an open space relation with other spaces centering on the court, and therefore, even after its use has been changed, it is still the most Korean-style space. In addition, with floor heating, the common sitting-style life is maintained continuously although the rooms have been converted and standing-style furniture is used. In this way, publicly promoted policies for Korean-style houses are allowed within the limit that the appearance is maintained and the internal spaces do not change the overall structure. However, in order to maintain the tradition of Korean-style houses and utilize them as various spaces, the following supplementations are necessary. First, the main hall and the inner court of a Koreanstyle house should be utilized actively. The court sometimes keeps individuals' privacy or expands the space by extending the view to outdoor spaces, and is sometimes used as an open space through interconnection between the inside and the outside of the house. Second, consideration should be given to vertical spaces. Horizontal expansion causes a change of floor plan. Thus, space should be secured using various cross-sectional changes, such as a kitchen and a loft over the kitchen. Third, structure should be changeable in order to adjust the size of spaces. Thus, through research on traditional windows, we need to develop changeable walls that can be installed and removed easily according to the use of spaces.

• The Journal of the Petrological Society of Korea
• /
• v.10 no.1
• /
• pp.1-12
• /
• 2001

A small of carbonate rocks and spatially-associated ultramafic rocks uniquely occur in the ulsan iron-serpentine mine of the sourtheastern Kyungsang basin. The study of field geology, core drilling data and stable isotope analysis suggest that the carbonate rocks are carbonatite formed from the melt reflecting intrusive natures. Based on this study, the geology of the Ulsan iron-serpentinite mining area consists of Cretaceous sedimentary, volcanic, granitic ultramafic and carbonate rocks in ascending order. The carbonate and ultramafic rocks show concentric and ellipsoidal shapes at the outcrop and a funnel shape in the cross sectional view. Carbon and oxygen stable isotope analysis show a bimodal pattern rather than a typical mantle pattern, which may indicate that the melt was a secondary melt generated within the crus not in the mantle directly. The uprising of ultramafic melts would have melted lime-contained rocks forming a secondary carbonate melt in the upper crus. Then, the intrusion of the ultramafic melts would have melted lime-contained rocks forming a secondary carbonate melt in the upper crust. Then, the intrusion of the ultramafic melt was followed by the intrusion of the carbonate melt along deep-seated fractures. Well-developed major fractures in this area, fluid inclusion characteristics of the carbonate rocks, the spatial relation between the ultramafic and carbonate rocks and stable isotope data support interpreting the Ulsan carbonate rocks as carbonatite.

• Korean Journal of Acupuncture
• /
• v.35 no.3
• /
• pp.130-138
• /
• 2018

Objectives : The purpose of this study is to explore patients' perceptions that deserve attention when designing core questions for a clinical practice guideline of Korean medicine(KM) for degenerative lumbar spinal stenosis (LSS). Methods : Patients who had been admitted to Pusan National Korean Medicine Hospital from November 1, 2015 to October 31, 2016 were invited to the survey. Patients were eligible if they were both clinically and radiologically confirmed as degenerative LSS. The structured questionnaire was distributed by mail and outpatient visits. Questions included types of experienced Korean/Western medical interventions for LSS, their perceived effectiveness on symptoms, the necessity for studies of KM for degenerative LSS, the types of KM interventions to be investigated and the types of outcome measures after treatments. Data were descriptively analysed. Results : Twenty of thirty-one invited participants responded to the questionnaire. Acupuncture and herbal medicine were the most frequently used KM interventions. Eighteen respondents reported that KM treatments were helpful for their improvement. Sixteen patients who mentioned that research on KM is needed chose acupuncture as the top priority(88%) among KM interventions. The most important outcomes in the view of nineteen respondents included functional recovery (68%) and pain relief (53%). Thirteen respondents (65%) replied that both short-term and long-term outcome were important for them. Conclusions : Our findings may have limited validity due to the small number of respondents and the potential selection and information bias. Further qualitative studies and large-scale surveys to comprehensively identify patients' views are warranted.