• Korean Journal of Applied Biomechanics
• /
• v.16 no.4
• /
• pp.95-103
• /
• 2006

The purpose of this study was to review the relevant literature about coaching and thereupon, survey the coaching methods used for golf lesson to reinterpret them and thereby, describe in view of kinetics the swing errors committed frequently by amateur golfers and suggest more scientific golf coaching methods. For this purpose, kinetic elements were divided into accuracy and power ones and therewith, the variables affecting such elements were identified. For this study, a total of 60 amateur golfer were sampled, and their swing forms were photographed with two high-speed digital cameras, and the resultant images were analyzed to determine the errors of each form kinetically, which would be analyzed again with the program V1-5000. The kinetic elements could be identified as accuracy, power and accuracy & power. Thus, setup and trajectory were classified into accuracy elements, while differences of inter-joint angles, cocking and delayed hitting. Lastly, timing and axial movement were classified into accuracy & power elements. Three errors were identified in association with setup. The errors related with trajectory elements accounted for most (6) of the 20 errors. Three errors were determined for inter-joint angle differences, and one error was associated with cocking and delayed hitting. Lastly, one error was classified into timing error, while five errors were associated with axial movement. Finally, as a result of arranging the errors into a cross table, it was found that the errors were associated with each other between take-back and back-swing, take-back and follow-through, back-swing and back-swing top, and between back-swing and down-swing. Namely, an error would lead to other error repeatedly. So, it is more effective to identify all the errors for every form and correct them comprehensively rather than single out the errors and correct them one by one.

• Journal of the Korean Vacuum Society
• /
• v.9 no.2
• /
• pp.162-166
• /
• 2000

High quality $Si_3N_4$ metal-insulator-metal (MIM) capacitors were realized by plasma enhanced chemical vapor deposition (PECVD). Titanium nitride (TiN) adapted as a diffusion barrier reduced the interfacial reaction between $Si_3N_4$ dielectric layer and aluminum metal electrode showing neither hillock nor observable precipitate along the interface. The capacitance and the current-voltage characteristics of the MIM capacitors showed that the minimum thickness of $Si_3N_4$ layer should be limited to 500 $\AA$ under the present process, below which most of the capacitors were electrically shorted resulting in the devastation of on-wafer yield. According to the transmission electron microscopy (TEM) on the cross-sectional microstructure of the capacitors, the dielectric breakdown was caused by slit-like voids formed at the interface between TiN and $Si_3N_4$ layers when the thickness of $Si_3N_4$ layer was less than 500 $\AA$. Based on the calculation of thermally-induced residual stress, the formation of voids was understood from the mechanistic point of view.

• Progress in Superconductivity and Cryogenics
• /
• v.17 no.3
• /
• pp.37-40
• /
• 2015

Recently, the electrical insulation design for electrical apparatuses is important to cope with the tendency of high voltage. The degradation characteristics of a superconducting coil due to an electrical breakdown should be considered to design a high voltage superconducting coil. In this paper, the degradation characteristics of 2G high temperature superconducting (HTS) wires are studied with respect to electrical breakdown tests. To analyze the dependency of the degradation characteristics of 2G HTS wires, the electrical breakdown tests are performed with AC(alternating current) and DC(direct current) voltage. All tests are performed by applying various magnitudes of AC and DC breakdown voltages. To verify the degradation characteristics of 2G HTS wires, the tests are performed with various 2G HTS wires with respect to stabilizer materials. The degradation characteristics of 2G HTS wires, such as Ic(critical current) and index number are measured by performing electrical breakdown tests. It is found that the characteristics such as Ic and index number can be degraded by an electrical breakdown. Moreover, it is concluded that the degradation characteristics of 2G HTS wires are affected by the stabilizer material and applied voltages. The cross-sectional view of 2G HTS wires is observed by using a scanning electron microscope (SEM). As results, it is found that the degradation characteristics of 2G HTS wires are concerned with hardness and electrical conductivity of stabilizer layers.

• Physical Therapy Korea
• /
• v.27 no.4
• /
• pp.233-240
• /
• 2020

Background: Cross-culturally adapted questionnaires may not be comparable to their original version. Objects: To examine concurrent validity of two health-related quality of life (HRQOL) instruments for the Korean versions of EuroQOL-5 Dimension (EQ-5D) and the abbreviated version of the World Health Organization Quality of Life (WHOQOL-BREF) instrument. Methods: A total of 139 cancer survivors from two rehabilitation institutes was recruited. All participants were registered for palliative rehabilitation care. Both instruments were concurrently administered by health care providers following the second bout of the rehabilitation cares. Rasch partial credit model and Spearman's correlation analysis were used to investigate: 1) dimensionality, 2) hierarchical item difficulty, and 3) concurrent validity using correlations between two instruments. Results: For the WHOQOL-BREF, all items except negative feeling, pain, dependence of medical aid, were found to be acceptable, while all items of EQ-5D were acceptable. There was an evidence of negative correlations between EQ-5D and 4 domains of WHOQOL-BREF. Two correlations were strong (EQ-5D vs. physical health domain, ρ = -0.610, 95% CI = -0.716 to -0.475) and moderate (EQ-5D vs. psychosocial domain, ρ = -0.402, 95% CI = -0.546 to -0.236). Other two correlations were weak (EQ-5D vs. social relationship and environmental domains, ρ = -0.242, 95% CI = -0.401 to -0.075 and ρ = -0.364, 95% CI = -0.514 to -0.207, respectively). Item difficulty calibrations of the two measurements were ranged from -0.84 to 0.86 for the EQ-5D and -1.07 to 1.06 for the WHOQOL-BREF. Conclusion: The study provides some supports for the concurrent validity of the two Korean versions of HRQOL instrument, with evidences of weak to strong correlations between the EQ-5D and four domains of the WHOQOL-BREF applied to various cancer survivors. Additionally, the cancer survivors appeared to have more of a tendency to view the EQ-5D items as being slightly more challenging than the WHOQOL-BREF items.

• Journal of the Korean Society of Radiology
• /
• v.11 no.6
• /
• pp.501-508
• /
• 2017

The dependence of CT scanning parameters on the CT number to physical density conversion from the CT image of CT and CBCT electron density phantom acquired by the CT scanner using in radiotherapy were analyzed by experiment. The CT numbers were independent of the tube current product exposure time, slice thickness, filter of image reconstruction, field of view and volume of phantom. But the CT numbers were dependent on the tube voltage and cross section of phantom. As a result, for physical density range above 0, the maximum CT number difference observed at the tube voltage between 90 and 120 kVp was 27%, and the maximum CT number difference observed between CT body and head electron density phantom was 15%.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.17 no.4
• /
• pp.262-269
• /
• 1997

An eddy current probe ($8{\times}1$ multiple-element, surface scan) was successfully designed and fabricated at the KEPRI using the impedance equivalent circuit theory. The probe is intended for the detection of circumferential deformations (cross-section view) of the heat exchanger tubing that can occur due to corrosion, erosion, and denting. Optimum design parameters providing the highest sensitivity and signal-to-noise ratio, such as the coil dimensions, electrical characteristics, and test frequencies, were determined based on initial laboratory experiments conducted on the test specimen (SS304 tubing: OD : 9.68mm, wall-thickness : 0.47mm) containing artificial flaws (e.g., dents and corroded surface on tube OD) using the available Zetec-made probe. Using this parameters, a new probe was made and tested on an unknown specimen. The result indicated that the new probe is capable of detecting the circumferential deformation with the error of ${\pm}0.2%$ (0.022mm) of the tube O.D.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.20 no.1
• /
• pp.63-71
• /
• 1983

A dye-edge tracking algorithm was used to determine the corresponding points in the two images(anterior-posterior and lateral) of the digital subtraction biplane angiography. This correspondence was used to reconstruct three dimensional images of cerebral artery in a dog experiment. The method was tested by comparing the measured image of oblique view with the computed reconstructed image. For the present study, we have developed three new algorithms. The first algorithm is to determine the corresponding dye-edge points using the fact the dye density at the moving edge avows the same changing pattern in the two projection views. This moving pattern of dye-edge density is computed using a matching method of cross-correlation for the two sequential frames' dye density. The second algorithm is for simplified perspective transformation, and the third one is to identify the specific corresponding points on the small vessels. The present method can be applied to compute the blood velocity using the dye-edge displacement and the three- dimensional distance data.

• Imaging Science in Dentistry
• /
• v.37 no.3
• /
• pp.157-163
• /
• 2007

Purpose: To evaluate the characteristics of (widely used) cone beam computed tomography (CBCT) images. Materials and Methods: Images were obtained with CT performance phantoms (The American Association of Physicists in Medicine; AAPM). CT phantom as the destination by using PSR $9000N^{TM}$ dental CT system (Asahi Roentgen Ind. Co., Ltd., Japan) and i-CAT CBCT (Imaging Science International Inc., USA) that have different kinds of detectors and field of view, and compared these images with the CT number for linear attenuation, contrast resolution, and spatial resolution. Results: CT number of both PSR $9000N^{TM}$ dental CT system and i-CAT CBCT did not conform to the base value of CT performance phantom. The contrast of i-CAT CBCT is higher than that of PSR $9000N^{TM}$ dental CT system. Both contrasts were increased according to thickness of cross section. Spatial resolution and shapes of reappearance was possible up to 0.6 mm in PSR $9000N^{TM}$ dental CT system and up to 1.0 mm in i-CAT CBCT. Low contrast resolution in region of low contrast sensitivity revealed low level at PSR $9000N^{TM}$ dental CT system and i-CAT CBCT. Conclusion: CBCT images revealed higher spatial resolution, however, contrast resolution in region of low contrast sensitivity was the inferiority of image characteristics.

• The Journal of Korean Society of Virology
• /
• v.29 no.4
• /
• pp.221-233
• /
• 1999

Prospect Hill Virus (PHV) is the well known serotype of hantavirus, a newly established genus in family Bunyaviridae. Extensive studies have upheld the original view of PHV genetics with three genes such as nucleocapsid (N) protein, envelope proteins (G1, G2) and RNA dependent RNA polymerase. In this study, we report the existence of additional gene that is encoded in an overlapping reading frame of the N protein gene within S genome segment of PHV. This gene is expected to encode a nonstructural small (NSs) protein and it seems to be only found in PHV infected cell. The presence and synthesis of NSs protein could be demonstrated in the cell infected with PHV using anti-peptide sera specific to the predicted amino acid sequence deduced from the second open reading frame. Ribosomal synthesis of this protein appears to occur at AUG codon at the 83rd base of S genome segment, downstream of N protein initiation codon. This protein is small in size (10.4 KDa) and highly basic in nature. The expression strategy of NSs protein appears that a signal mRNA is used to translate both N and NSs protein in PHV infected cell. 10 KDa protein in virus infected cell lysates can bind to mimic dsRNA. This fact strongly suggests that NSs protein may be involved in virus replication on late phase of viral life cycle.

• Archives of Plastic Surgery
• /
• v.32 no.1
• /
• pp.49-54
• /
• 2005

Evaluations and treatments of nasal bone fracture have been mainly focused on aesthetic aspect, but nose has an important role as an airway. The purpose of this study was evaluation of nasal bone fractures in the view of nasal obstruction and its improvement after reduction. Acoustic rhinometry was applied to the 77 nasal bone fractured patients who received closed reduction from August 2002 to July 2003 and received closed reduction. This was tested twice, before and 6 days after reduction, for all 77 patients and additional acoustic rhinometry was also possible in 26 patients after 6 months. The analysis of acoustic rhinometry were based on data of minimal cross-sectional area(MCA) according to fracture sites(one side, both side and tip) and septal displacement. Mean MCA for all cases before reduction was $0.43{\pm}0.21cm^2$, which was 19% decrease compared to normal adult data($0.53{\pm}0.12cm^2$). Depending on fracture sites the MCA were $0.45{\pm}0.16cm^2$ for one side fracture, $0.35{\pm}0.18cm^2$ for both side fracture, and $0.42{\pm}0.25cm^2$ for tip fracture. The patients with septal displacement showed more severe obstruction than ones without septal displacement, $0.26{\pm}0.26cm^2$ and $0.46{\pm}0.10cm^2$, respectively. The MCA was improved up to $0.50{\pm}0.22cm^2$ after reduction and showed slight decrease after 6 month($0.48{\pm}0.23cm^2$). Based on the results of this study, nasal bone fracture really caused airway obstruction(19% decrease). Both side fracture showed more profound decrease than one side fracture and septal displacement was an important parameter which causes nasal obstruction. Closed reduction improved MCA by 14% right after reduction, and 11% after 6 month follow up.