• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.12
• /
• pp.2019-2028
• /
• 1997

It has been well established that resistant force and wear that occur during rolling motion depend on several factors such as material type, hardness, subsurface microstructure, applied load, and speed. The purpose of this work is to investigate the effect of microstructure and the state of deformed layer on the rolling contact characteristics in dry and lubricated rolling contacts. The results of this work show that the rolling resistance behavior depends on the state of the deformed layer. Also, lubrication can reduce the plastic flow at the surface but may still have an effect on the subsurface strain. The cross-sectional view of the microstructure shows that surface traction has a difinite effect on the morphology of the surface region. That is, significant slip seems to have taken place between the ball than those of the dry rolling case. The surface generation effects were significantly less compared to the case of dry rolling contact.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.5
• /
• pp.969-980
• /
• 2001

이 연구의 목적은 사회.문화적 관점에서 한.미 여성의 이상적인 미, 바디이미지, 그리고 외모행동을 비교조사 하는데 있다. Open-Ended Questions에 의한 연구 결과, 이상적인 미로 미국여성이 \"키크고 마른 신체 매력성\"을 추구한 반면, 한국여성은 \"내적인 미\"와 \"서구적인 신체 매력성\"을 추구하는 것으로 나타났다. 이상적인 미를 추구하기 위해 미국여성은 주로 신체의 하체부분, 한국여성은 얼굴부분을 많이 가꾸고 있는 것으로 나타났다. 외모행동으로는 한국여성은 화장이나 피부관리 등에, 미국여성은 excercise나 다이어트 등을 많이 하고 있었다. 사회.문화적 이상적인 미에 비교해 볼 때 두 집단 모두 자신의 외모에 대해 만족하지 못하는 편으로 나타났다. 또한 두 나라 집단의 여성들은 각 나라마다 사회.문화적 이상적인 미가 각각 존재해야 함에도 불구하고 현재에는 이상적 미의 기준이 문화에 관계없이 동일한 편이라고 응답을 하였다. 본 연구에서는 사회.문화적 집단주의와 개인주의 개념을 토대로 이러한 연구결과들이 논의되어 진다.주의 개념을 토대로 이러한 연구결과들이 논의되어 진다.

• Applied Microscopy
• /
• v.40 no.4
• /
• pp.267-270
• /
• 2010

The skin is the largest organ of the integument system whose surface is closely related with many physiological and pathological conditions. Various methods are used to understand the structural and functional status of human skin. We would like to present usefulness of scanning electron microscopic (SEM) observation of skin replica and its significance of training module for a novice. The silicon replicas from several regions of the body (hand, finger, forearm, lip, and face) were casted by applying Exafine$^{(R)}$ mixture. The positive replicas were prepared by applying EPON 812 mixture on negative silicon replicas. Some of the negative silicon replicas were cut with a razor blade and surface profiles were observed. The negative and positive replicas were coated with platinum and were observed under the scanning electron microscope. We could investigate the detailed structures of the human skin surface without any physical damage to the subject. The positive replicas depicted real surface structure of the human skin vividly. The cross sectional view of the negative silicon replicas provided surface profile clearly. The scanning electron microscopic observation of the human skin replicas would be useful to study skin surface structures and to evaluate medical and esthetical applications.

• Transactions of Materials Processing
• /
• v.17 no.3
• /
• pp.170-181
• /
• 2008

The shape of rectangular cup used for Ni-MH(Nickel-coated Metal Hydrogen) battery for hybrid car looks quite simple, but the forming process of extruding and setting up process design are highly difficult. Furthermore, there are few concrete reports on the rectangular deep drawn cup as part of hybrid vehicles till now. In this study, process design for rectangular cup in the multi-stage deep drawing process is carried out, and FE analysis is also preformed based on the result of the process design. From the simulation result, some unexpected problems such as earing, wrinkling and excessive thickness changes of the intermediate blank occurred. To overcome these failures, a series of modification for punch shape in the forming process design are completed and applied. Considering the modified punch shape in the multi-stage deep drawing process, additional FE analysis is also carried out and the simulation result is verified in view of the deformed shape, thickness change and effective strain distribution. The result of FE analysis with the improved process design confirmed not only reducing thinning of wall and possibilities of failure but also improving the quality of drawing product through the modification of punch shape.

• Journal of the Korean Society of Industry Convergence
• /
• v.15 no.3
• /
• pp.83-86
• /
• 2012

This study have cross checked the change of internal sludge-recycle in Full-scale Anaerobic-Digestion, and researched about not only the improvement of Bio-gas production from the digested sludge but also the efficient method of sludge minimization. Ultimate aim of the study is to reduce the amount of sludge by the improved efficiency of contact with the organic-matter and the microbes in Anaerobic-Digestion. The sludge-recycle fluidized sludge layer and raised the activity of the sludge, The sludge-recycle ratio of optimum was 500%, VS and COD removal ratio respectively appeared with 67.8% and 70.4%. Through these result of this study, it may be positive view to treat waste sludge by the sludge-recycle ratio in terms of minimization and circulation of resources.

• Journal of Fashion Business
• /
• v.6 no.2
• /
• pp.110-123
• /
• 2002

This study investigated the influence of cultural and general trend of the times on fashion trends and the hybridization of these trends. The objectives of this study were to suggest new approach method of the fashion forecasting and to find out the cultural meanings and values of fashion. Key words that explains fashion trend from spring/summer of 1995 to fall/winter of 2002 were collected from professional fashion trend journals. These terms were analysed with domain analysis based on the semantic relationship. The frequency of their appearance in each season and the aspect of their appearance in each season were analysed. The hybrids of the fashion trends were analysed longitudinally and cross-sectionally as well by investigating the cover terms that were found as a result of domain analysis. The method used in this study can be applied to future study of fashion trend in that it offers an objective view of fashion trend and can allow researchers to study fashion trend in a concrete way.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.6
• /
• pp.30-39
• /
• 2001

The direct injection into the cylinders has been regarded as a way of the reduction in fuel consumption and pollutant emissions. The spray produced by the high pressure injector is of paramount importance in DISI(Direct Injection Spark Ignition) engines in that the primary atomization process must meet the requirement of quick and complete evaporation, mixing with air and combustion especially to prohibit the excessive HC emissions. The interaction between air flow and fuel spray was investigated in a steady flow system embodied in a wind tunnel to simulate the variety of flow inside the cylinder of the DISI engine. The direct Mie scattered and shadowgraph images presented the macroscopic view of the liquid sprays and vapor fields. The velocity and particle size of fuel droplets were investigated by phase doppler anenometer(PDA) system. The processes of atomization and evaporation with a DISI injector were observed and consequently utilized to construct the data-base for the spray and fuel-air mixing mechanism as a function of the flow characteristics.

• Biomolecules & Therapeutics
• /
• v.26 no.2
• /
• pp.182-190
• /
• 2018

The objective of this work is to evaluate the effect of polyamidoamine (PAMAM) dendrimers on electroosmotic flow (EOF) through skin. The effect of size and concentration of dendrimer was studied, using generation 1, 4 and 7 dendrimer (G1, G4 and G7, respectively). As a marker molecule for the direction and magnitude of EOF, a neutral molecule, acetoaminophen (AAP) was used. The visualization of dendrimer permeation into the current conducting pore (CCP) of skin was made using G4-fluorescein isothiocyanate (FITC) conjugate and confocal microscopy. Without dendrimer, anodal flux of AAP was much higher than cathodal or passive flux. When G1 dendrimer was added, anodal flux decreased, presumably due to the decrease in EOF by the association of G1 dendrimer with net negative charge in CCP. As the generation increased, larger decrease in anodal flux was observed, and the direction of EOF was reversed. Small amount of methanol used for the preparation of dendrimer solution also contributed to the decrease in anodal flux of AAP. Cross-sectional view perpendicular to the skin surface by confocal laser scanning microscope (CLSM) study showed that G4 dendrimer-FITC conjugate (G4-FITC) can penetrate into the viable epidermis and dermis under anodal current. The permeation route seemed to be localized on hair follicle region. These results suggest that PAMAM dendrimers can permeate into CCP and change the magnitude and direction of EOF. Overall, we obtained a better understanding on the mechanistic insights into the electroosmosis phenomena and its role on flux during iontophoresis.

• Archives of design research
• /
• v.20 no.2 s.70
• /
• pp.17-28
• /
• 2007

Despite a current fascination with East Asian iconography such as Zen Style among contemporary designers, there is a lack of genuine cross-cultural discourse that could enable us to share essential design experiences. To bring the discussion a deeper level, traditional Japanese tea-house in its design philosophy of body-mind interplay is explored. Tea-house is a superb manifestation to reveal a holistic understanding of the world. Nondualistic realization is generally associated with the dominant tendency of traditional East Asian philosophy, namely the view that the self and environment, and that the mind and the body exist in unity. The essence of tea-house is not in its poetic style or meticulous details, but in its unmistakably monistic approach of creating inseparable form, function and meaning. Tea-house bestows dignity upon restraint, imperfection, discomfort, poverty, and even humility. This concept offers a tremendous insight since it implies that the rational and effective design solution to the greatest degree is not sufficient. Perhaps the most challenging question about tea-house is: How does our experience with human-made 'design' in the broadest sense help both our body and mind attain a full harmony of being? It is the heading which this research inquires.

• The Korean Journal of Food And Nutrition
• /
• v.6 no.3
• /
• pp.178-188
• /
• 1993

This research was attempted to investigate changes in physicochemical properties of rice extrudate with added ginger powder extruded by single screw extruder. Graphic three dimensional analysis on response surface regression was used to evaluate effects of extrusion variables on quality factors of the extrudate according to two independent variables, ginger consent 0∼12%, moisture content 14∼26%. The summarized results are as follows : 1) Regarding proximate composition of rice extrudate with added ginger powder, as ginger powder content of raw material Increased, crude tat, crude protein, crude ash and crude fiber increased, while soluble nitrogen free extract decreased. 2) Graphic three dimensional analysis on response surface regression was conducted for each dependent variable which revealed statistically significant relationship with independent variables, 0∼120A ginger and 14∼26% moisture content. Expansion ratio had a critical point as moisture content changed. As ginger and moisture content Increased, bulk density, break strength and water absorption Index Increased, while water solubility Index decreased. The predicted maximum degree of gelatinization in 6.15% ginger and 15.56% moisture content is 88.27%, and lightness decreased as ginger content Increased. According to the microstructure for the cross section of extrudate obsorbed with image analyzer, air cell number and perimeter revealed saddle point, meanwhile total area and fractarea of air cell had critical points as moisture content changed. In view of the results, quality of rice extrudate with added ginger powder was optimum when rice flour was fed to the extruder with 2∼7% singer powder and 15∼20% moisture content.