• Journal of the Korean housing association
• /
• v.16 no.6
• /
• pp.149-160
• /
• 2005

There is an increasing curiosity in Nordic as well as Far East Asian countries about senior cohousing, where the middle-aged and elderly people, 55+. form a community for independent living. What are the ideas behind senior cohousins? Why are people moving to senior cohousing community? What may senior cohousing provide and mean for individuals and groups of the elderly? Is senior cohousing a sustainable idea for future generations of elderly people? There is a curiosity among elderly people looking for interesting alternatives. Municipalities and state authorities hope that senior cohousing can contribute to the welfare of the elderly as the scope far support by the public sector is decreasing. Actors in the building sector are interested In investment and meeting the demands. In Denmark and Sweden the senior cohousing concept had a revival around 1985. In Denmark there has been a vivid discussion and plenty of books have been published. In Sweden there are few evaluations but an increasing interest. From different points of view, Danish, Swedish and Nordic as well as Far East Asian countries, there is a concern to explore and compare to get more facts and deeper understanding far further actions. This is a comparative study of inhabitants' life satisfaction in cohousing communities in Denmark and Sweden. The study is based on discussions with cohousing providers, study-visits in cohousing communities and a questionnaire to residents themselves. Study-visits took place during springtime and the questionnaires were handled spring and summer of 2002. 655 seniors responded to the questionnaire from 14 seniorbofae llesskaber (rented or housing cooperatives) in Denmark, 11 seniorhus within the SABO sector (municipality owned housing with rental apartments) and 8 housing cooperatives initiated by the Seniorgarden Housing Company in Sweden. Data were analyzed by SPSS program, using frequency, percentage, cross-tab and chi-square test. This paper focused three major areas of interest; 1)characteristics of the inhabitants. 2) participation in common activities and mutual cooperation among residents and 3) evaluative outcomes from the inhabitants' points of view. Mainly the inhabitants expressed quite positive experiences of their living environment and everyday lift and a few difference was found in life satisfaction between Denmark and Sweden.

• Quality Improvement in Health Care
• /
• v.1 no.1
• /
• pp.56-65
• /
• 1994

Total quality management has been a focus of concern in recent years since some dissatisfaction with the results from implementation of quality assurance programs in the U.S. Many managerial methodologies and innovation guidelines from academic disciplines have been applied to promote TQM programs in the health field. This paper consists of two folds of aspects: firstly to examine TQM's managerial philosophy by comparing with the newly introduced managerial concepts in Business Reengineering; and then to introduce a method for an integrative way of process analysis, Entity Life-Cycle Diagram (ELCD) modeling. The analysis method was compared with Process Map, which is a well-known method for BR applications. To show effectiveness of ELCD modeling, a case of application was introduced using 'drug' as a target entity. With having TQM issues in mind, the result was reflected in designing Entity Relation Diagrams. The results of ELCD modeling turn out to be helpful in designing database related to quality monitoring, in that many monitoring check points can be identified in a systematic way and that queries cross-sectional over organizational boundaries can be generated with a consistent view focusing on the drug use as a single process. Full evaluation of the analysis method remains to be studied until the completion of the information system under construction. But as long as TQM is based on a process-oriented view and needs supports from information system, ELCD can be one of the appropriate choice as a tool for the process analysis.

• The Journal of Korean Association of Computer Education
• /
• v.7 no.3
• /
• pp.45-56
• /
• 2004

Java provides support for Web, concurrent programming, safety, portability, and GUI, so there is a steady increase in the number of Java users. Java is based on the object-oriented concepts such as classes, instances, encapsulation, inheritance, and polymorphism. However the JVM(Java Virtual Machine) hides most of the phenomena related to the concepts. This is why most of Java users have much difficulty in learning and using Java. As a solution to the problem, I have developed a tool Alpha that visualizes the phenomena occurred in the JVM from the standpoint of the concepts and will describe the design and features of the tool in this paper. For practicality and extendability Alpha has an MVC(Model-View-Controller) architecture and visualizes the phenomena such as object instantiations, method invocations, field accesses, cross-references among objects, and execution flows of threads in the various ways according to the levels and purposes of the users.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.11 no.6
• /
• pp.361-367
• /
• 2016

In this paper, we propose an improved single view metrology (SVM) algorithm to accurately measure the height of objects. In order to accurately measure the size of objects, vanishing points have to be correctly estimated. There are two methods to estimate vanishing points. First, the user has to choose some horizontal and vertical lines in real world. Then, the user finds the cross points of the lines. Second, the user can obtain the vanishing points by using software algorithm such as [6-9]. In the former method, the user has to choose the lines manually to obtain accurate vanishing points. On the other hand, the latter method uses software algorithm to automatically obtain vanishing points. In this paper, we apply image resizing and edge sharpening as a pre-processing to the algorithm in order to improve performance. The estimated vanishing points algorithm create four vanishing point candidates: two points are horizontal candidates and the other two points are vertical candidates. However, a common image has two horizontal vanishing points and one vertical vanishing point. Thus, we eliminate a vertical vanishing point candidate by analyzing the histogram of angle distribution of vanishing point candidates. Experimental results show that the proposed algorithm outperforms conventional methods, [6] and [7]. In addition, the algorithm obtains similar performance with manual method with less than 5% of the measurement error.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.39 no.1
• /
• pp.63-76
• /
• 2015

This study conducted a survey to gauge the buying and wearing propensities of wearers of leg guards made for baseball catchers, as well as product characteristics of preferred leg guards. Data from the survey were analyzed to obtain basic data for the development of an advanced leg guard design. Degree of compression, horizontal distance, cross section view and outline 3D sketch were also analyzed from the 3D data of leg guards; in addition, mobility and kinematic analysis were conducted through a wearing test. The survey indicated that imported products dominate the current retail market because they are appreciated by customers in terms of fit, price, brand, and protection. Representative complaints of products were discomfort, pressure, and the heavy-weight of the leg guards in general attributed to overall structure and 3D shape. When the pressure was lower on the front area of knee, it feels better to wear and the average knee angular velocity during the up and down motion increased, which suggests a better design from a kinematic point of view. The knee is the primary part of the body responsible for any movement of the lower limbs; consequently, the degree of compression and support stability of the leg guards near the knee area are important factors to evaluate the performance of leg guards. The results of our study indicate significant opportunities for improvement in product design and the development of baseball leg guards along with an ergonomic design that considers the mobility of the knee, skin deformations is necessary to improve performance. The process followed in this study will be applicable to studies on other personal protective equipment for sports.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.16 no.2
• /
• pp.129-140
• /
• 2013

This study reviewed different results according to the selection of viewpoints and considerations of the neighborhood in the analysis of view to regulate the height of buildings. To do this, 4 cases were set according to the analytical methodology and a GIS simulation was performed. Characteristics of each methodology were compared and analyzed by simulated values with ANOVA(analysis of variance) and post-hoc analysis. First, the method using moving viewpoints was found to be appropriate for the regulation of building height as it could reflect basic characteristics of landscape which was sequential and it did not show big difference in analysis result according to situational setting. Second, the method using grid viewpoints showed a problem that viewpoints at left and right sides viewed ridges of other mountains than the background mountains of the target land. Additionally, the simulation method that induces three-dimensional cross-sections between multiple sight-surface and virtual construction points created at viewpoints used in this study was found to be useful in the simulation review with various settings as it induced the marginal height of the spot quantitatively.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.172-172
• /
• 2009

In this study, we presented comparative discrimination methods to identify various line and planar defects observed in nonpolar a-GaN epilayers on r-sapphire substrates. Unlike the case of conventional c-GaN, which is dominated by perfect threading dislocations, systematic identification of undistinguishable defects using transmission electron microscopy (TEM) is necessary to suppress the propagation of defects in nonpolar GaN epilayers. Cross-sectional TEM images near the [0001] zone axis revealed that perfect mixed and pure screw type dislocations are visible, while pure edge, partial dislocations, and basal stacking faults (BSFs) are not discernible. In tilted cross-sectional TEM images along the [$1\bar{2}10$] zone axis, the dominant defects were BSFs and partial dislocations for the $g=10\bar{1}0$ and 0002 two-beam images, respectively. From plan view TEM images taken along the [$11\bar{2}0$] axis, it was found that the dominantpartial and perfect dislocations were Frank-Shockley with b=${\pm}1/6$<$20\bar{2}3$> and mixed type without an 1 component including b=${\pm}1/3$<$1\bar{2}10$> and ${\pm}1/3$<$\bar{2}110$>, respectively. Prismatic stacking faults were observed as inclined line contrast near the [0001] zone axis and were visible as band contrast in the two-beam images along the [$1\bar{2}10$] and [$11\bar{2}0$] zone axes.

• Transactions of Materials Processing
• /
• v.14 no.5 s.77
• /
• pp.432-438
• /
• 2005

Among the most of manufacturing process, plastic deformation method offers a significant advantage in productivity and enable mass production with controlled quality and low cost. From the point of view, micro forming is a well suited technology in manufacturing very small metallic parts, in particular for mass production, as they are required in many industrial products. Meanwhile, Al 5083 superplastic alloy with very small grains has a great advantage in achieving micro deformation under low stress due to its relatively low strength at a specific high temperature range. This paper describes the micro formability of Al 5083 superplastic alloy and its application to die forging of micro patterns. Micro formability tests of Al 5083 superplastic alloy were carried out with the specially designed micro forging system by using V-grooved micro dies and pyramidal dies made of (100) silicon. With these dies, micro forging was conducted by varying the applied load, material temperature and forging time The micro formability of Al 5083 superplastic alloy was evaluated by comparing $R_f$ value, where $R_f\;=\;A_f/A_v$ ($A_v$ : cross-sectional area of the flowed metal, $A_v$ : cross sectional area of V-groove). The micro formability of 3 dimensional Patterns was also evaluated using Pyramidal type micro dies.

• Journal of Preventive Medicine and Public Health
• /
• v.31 no.4 s.63
• /
• pp.770-785
• /
• 1998

This study describes the relation of physician's income and price of medical service and social welfare through microeconomic view, reviews the literature of influencing factor on physician's income, and it describes general distribution of physician's income, and analyzes influencing factor of physician's income. A total of 844 persons responded to the mail survey, through stratified sampling by 23 branches of medical society in Korean RBRVS study. The design of the study is cross sectional study, and the unit of analysis is a physician. To examine the change of average income per month, multiple regression was used to test the change according to physician's characteristics, demographic characteristics, scale of clinic, average intensity of ordinary work, and specialty. The major findings of this study are as follows; 1. As for self-employed physicians, the difference of average income per month among specialties was mcreased \4,850,000, but the difference was \6,020,000 under the control of control variables. 2. The number of average out-patients per month and number of nurses and nursing aides significantly positively associated, and average income per month was significantly higher for physicians who had sick-beds than physicians who had no sick-beds. In conclusion, the number of out-patient and number of nurses and nursing aides is the major influencing factor, and the difference of average income per month among specialties existed in self-employed physicians. So this study suggests basic hypothesis that the price of medical service and supply of physician by specialties are not pertinent. Being a cross-sectional study, this study can not suggest causal explanations. In the future, further study is needed for causal explanations.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.11
• /
• pp.5005-5009
• /
• 2016

Introduction: Gutkha contains harmful and carcinogenic chemicals and oral cancer caused by tobacco usage has been reported as a major preventable cause of death worldwide by the World Health Organization. The Telangana state government implemented a ban on gutkha usage starting in 2013 but how effective this ban has been remains unclear. Objectives: The objective of this study was to determine the actual impact of the gutkha ban on users and vendors. Methodology: A cross-sectional study was conducted among gutkha users and tobacco vendors in Ranga Reddy district, Telangana. Based on a pilot study the sample size was determined as 368 and 384 for users and vendors respectively. Two separate questionnaires were administered to these groups. The parameters studied mainly included knowledge regarding the ban, and its impact. Results: About 49.1% of the users were aware of the ban on gutkha. Newspapers were the main source of information regarding the ban as reported by 45.3% of users. After the ban, 29.8% of gutkha users switched to other tobacco products. Awareness of health hazards and non-availability of gutkha was the most important reason stated for quitting or reducing consumption. Conclusion: The perspective of ban when visualized from the users point of view depicted a negative impact while the vendors portrayed a positive impact. Considering the addictive potential of the ingredients of gutkha, recording the effects of the ban on regular consumers and determining whether they can still obtain the products by illicit trade, would be noteworthy for implementation of strict rules.