• 대한의용생체공학회:의공학회지
• /
• 제16권2호
• /
• pp.149-156
• /
• 1995

동맥전단부를 연구할수있는 새로운 실험방법과 기계역학적 분석방법을 제시하였다. 지금까지동맥역학적 연구는 대부분이 동맥의 길이방향과 원주방향에 대한것이 이였다. 두께방향의 변형은 포아손비라든지 비압축성가정으로 이론적으로 결정되었다. 또한 두께에 걸친 변형의 변화도 무시되었다. 그러나 병리학적인 의미에서 동맥의 두께에 걸친 변형도와 변형의 분포는 중요한 의미를 가진다. 그러므로 본연구에서 제안된 실험방법과 장치는 두께전반에 걸친 변형을 측정할수 있게 했다. 또한 전단부의 부위별 변형도의 관찰이 가능하고 병리적인 동맥경화증에 대한 현상과 역학적현상을 상관시킬 수 있음에 중요한 의미를 들 수 있다.

• 수산해양기술연구
• /
• 제54권1호
• /
• pp.25-31
• /
• 2018

In this study, the differences of holding power according to the shape and weight distribution of concrete weight used in shellfish shell fishery were investigated through the experiments. To investigate the differences in shape, five bar-shaped concrete weights with the same length and different cross-sectional shapes were produced. The sectional shape of each weight was square, triangle, circle, small cross, and large cross (SQ, TR, CI, CR-S, CR-L). Ten rectangular parallelepiped weights with different bottom area and cross-sectional area were produced. To investigate the differences by the weight distribution, the holding power on the square model (SQ) with six 50 g weights at different positions was investigated. All the holding power was obtained by measuring the tensile force generated when the concrete weight was pulled at a constant speed on the sand. As a result, there were no differences in holding power between the ten rectangular weights. However, the experiment on weights with different cross-sectional shapes showed differences in holding power. The holding power was higher in the order of CR-L > CR-S > CI > TR > SQ. In the weight distribution test, the holding power was higher as the front side of the weight was heavier. Generally, the frictional force is the same even if the shape is different, when two objects have the same value in the weight and the roughness. On the other hand, it seems to have a large impact when the shape of the bottom is deformed in the course of pulling the object. Particularly, the larger the degree of protrusion like cruciform weights, the more the holding power increased while deeply digging the bottom. It is also likely that the holding power increases as the front weight increases.

• 한국터널지하공간학회 논문집
• /
• 제17권3호
• /
• pp.215-226
• /
• 2015

본 연구에서는 정량적 위험도 평가를 위한 시나리오 구축시 제반인자가 화재안전성에 미치는 영향을 검토하기 위하여 대피로 폭에 따른 하차시간을 분석하고 단면적별로 제연풍속, 제연방향, 대피방향의 상관관계에 따른 화재특성 및 대피특성을 분석하였다. 적용 단면적은 복선고속철도는 $97m^2$, 단선고속철도는 $58m^2$, 단선일반철도는 $38m^2$로 하였으며, 터널풍속은 0.5~3.5 m/s 조건으로 하였다. 본 연구 결과, 터널의 단면적이 작아지면 터널내 유해가스의 농도가 단면적 감소비 이상으로 증가하는 것으로 나타났으며, 단면적이 작은 경우에는 화재초기에서부터 열차주변의 환경이 성능위주설계기준에서 제시하고 있는 한계기준을 초과하는 것으로 나타났다. 대피특성파악을 위한 유효대피시간을 분석에서는 가시도에 의해서 유효대피시간을 평가하는 경우가 가장 짧게 나타났다. 또한 유해가스에 대한 유효호흡분량(FED)을 해석하여 등가사망자가 발생하는 시점을 기준으로 하여 구한 유효대피시간과는 상당한 차이가 있는 것으로 나타났다.

• 조명전기설비학회논문지
• /
• 제26권2호
• /
• pp.86-91
• /
• 2012

A conductor has been produced according to IEC standard and low voltage electrical facility has been installed according to IEC 60364. So we must comply with international standard for design, construction and inspection. But because of many related and varied standards, it is difficult to apply to design and inspect for electrical equipment. We researched the necessity of design guide which is detailed and systematization from survey. For detailed design guide, we suggest calculation method of protective conductor cross-sectional area at TN-S system according to BS 7671 regulation and KS C IEC 60364 standard.

• 한국생산제조학회지
• /
• 제9권4호
• /
• pp.41-47
• /
• 2000

In this study, the purpose finds out the best welding conditions for bonding of electric wire by ultrasonic welding. The material was plastic-insulating low-voltage-cabels for automobiles. The experiment varied the values of welding time and welding pressure and fixed the values of amplitude and energy. With the facts, the best condition for ultrasonic welding to achieve bonding exactly is gained according to the size of the cross-sectional area of the cable, and the adhesive intensity is greatly influenced by the variables of welding time and welding pressure. Also when the welding time and welding time and welding pressure increase as the cross-sectional areas of the cable increase the welding result in gained exactly.

• 한국재료학회지
• /
• 제3권2호
• /
• pp.193-196
• /
• 1993

A procedure for preparing cross-sectional specimens for transmission electron microscopy(TEM)by focused ion beam(FIB)milling of specific regions of semiconductor devices is outlined. This technique enables TEM specimens to be pripared at precisely preselected area. In-situ #W thin film deposition on the top surface of desired site is complementally used to secure the TEM specimens to be less wedge shaped, which is main shortcoming of previous FIB-assisted TEM sample preparation technique. This technique is quite useful for the TEM sample priparation for fault finding and the characterization of fabrication process associated with submicron contact technologies.

• 펄프종이기술
• /
• 제32권5호
• /
• pp.54-59
• /
• 2000

The next generation fibre size analyser has been developed in Kajaani based on over 15 years experience in fibre measurement. This new FiberLab-analyser can measure fibre length both along the fibre centre line and as projected. The cross-sectional measurements of fibre are in principle similar to the earlier version FiberLab. Measured data are generally displayed in distributions. Some new calculations have been added, for example the fibres cross sectional area and fibre volume index both available as distributions as well. The performance of the FiberLab measurement is verified against the manual microscopic testing. These tests show that the new image analysis-based measurement well matches with the manual methods.

• Restorative Dentistry and Endodontics
• /
• 제30권4호
• /
• pp.327-334
• /
• 2005

본 연구에서는 ProFile로 근관형성 시 anticurvature filing 방법의 영향을 평가하고자 하였다 변형된 Bramante 법을 이용해 36개의 레진 블록을 치근단으로부터 8mm부위와 근관의 최대 만곡 부위에서 절단한 후 재조립하였다. 근관형성의 동작에 따라 anticurvature filing motion, circumferential filing motion, straight up-and-down motion의 3가지 실험군으로 분류한 다음 ProFile로 근관을 형성하였으며, 술 전$\cdot$후의 단면을 stereomicroscope로 촬영, 저장하고 중첩하여 근관 단면의 변화와 근관의 중심 이동률을 비교 평가하였다. 모든 위치에서 단면적 변화량, 만곡 내측으로의 형성량과 중심 이동률은 세 군간에 유의한 차이가 없었으며, 만곡 외측으로의 형성량은 치근단으로부터 8mm 부위에서 anticurvature filing motion, circumferential filing motion, straight up-and-down motion의 순으로 많았으나, 근관의 최대 만곡 부위에서는 차이가 없었다 이상의 결과에서 만곡 근관의 위험 부위에서 ProFile로 근관형성 시 anticurvature filing motion의 영향은 다른 motion과 비교해 볼 때 유의할 만한 차이가 없는 것으로 생각된다.

• The Korean Journal of Pain
• /
• 제34권3호
• /
• pp.369-370
• /
• 2021

• 한국축산식품학회지
• /
• 제36권5호
• /
• pp.583-593
• /
• 2016

The aim of this study was to investigate the effects of morphological characteristics of porcine muscle fibers on growth performance, muscle fiber characteristics, and pork quality taken from the longissimus dorsi muscle. A total of 239 crossbred pigs (164 castrated males and 75 females) were used in this study. Experimental pigs were categorized by the total number of muscle fiber (TNF: High and Low) and cross sectional area of muscle fiber (CSAF: Large, Middle, and Small). Their combinations were classified into six groups (High-Large, HL; High-Middle, HM; High-Small, HS; Low-Large, LL; Low-Middle, LM; Low-Small, LS). The TNF and CSAF were significantly (p<0.05) correlated with growth rate and carcass productivity, while the only of the type I number had no meaningful relationships excluding the correlation with loin area (p<0.001). The proportion of type I area was positively correlated with pH_{45 min} while the proportion of type IIB area was negatively correlated with pH_{45 min} and pH_{24 h} (p<0.05). Drip loss and protein denaturation had strong relationships with the proportion of type IIB number or area. The HL group exhibited the greatest growth performance. In addition, the HL group had significantly greater values in protein solubility than the other groups. In conclusion, this study suggest that high TNF combined to large CSAF improve the ultimate lean meat productivity and assure normal meat quality simultaneously with increased both proportion of number and area of type I, type IIA muscle fibers and lowered proportion of number and area of type IIB.