• 제목/요약/키워드: cross-section distance

검색결과 190건 처리시간 0.028초

교량밀집 구간의 흐름특성과 하상변동 모의 (Flow Characteristics and Riverbed Change Simulation on Bridge-intensive Section)

  • 조홍제;전우열
    • 대한토목학회논문집
    • /
    • 제30권6B호
    • /
    • pp.589-598
    • /
    • 2010
  • 하천단면의 형상이 복잡하고 교량이나 보등과 같은 수리구조물이 짧은 구간에 연속해서 설치되어 있는 경우, 흐름특성이나 하상변동 양상에 대한 분석이 매우 중요하다. 울산광역시를 관통하는 태화강의 삼호교 부근 약 250 m 구간에는 3개의 교량이 설치되어 있고, 상 하류에 각 1개씩의 지천이 유입되고 있어 홍수시 수위변화와 세굴 등에 의한 단면 변화가 크게 나타난다. 그럼에도 불구하고 태화강이 삼호교(구)를 기준으로 국가하천과 지방하천으로 나뉘는 구간이라는 이유로 상 하류 구간을 1차원 모형을 통해 따로 구분하여 분석하고 있다. 본 연구에서는 1차원 HEC-RAS 모형과 2차원 SMS 모형의 RMA2 모형을 이용하여 교량밀집과 지천유입에 따른 흐름특성을 상 하류 연계하여 비교 분석하였으며, SMS 모형의 SED2D 모형을 이용하여 같은 구간에 대한 하상변동 양상을 분석하였다. 그 결과 연속된 3개 교량에 대한 HEC-RAS 모형 과 RMA2 모형의 수위차는 0.87 m였고, SED2D 모형에 의한 하상변동 모의결과는 교각간격이 좁고 중간에 위치한 삼호교(문화재)에서 최대 0.231 m가 세굴되는 것으로 나타났다. 그러므로 하천기본계획시 교량밀집 지역이나 단면 및 흐름 변화가 심한 구간에 대해서는 2차원 모형에 의한 홍수위 산정과 교각의 세굴에 대한 대책이 필요하고, 국가하천 및 지방하천에 대한 통합적인 분석이 필요하다. 어지는 경우도 있었다. GQPM에 대한 10일강우예측은 첨두강수와 강수총량에 있어서 다소 과소한 모의값을 보이고 있으며, 강수보정효과도 RDAPS에 비하여 저조한 수준이었다. 이 부분은 강수예측의 사후보정으로는 한계가 있는 것으로 보여지며 원시예측모형의 안정화를 통하여 개선할 수 있는 부분으로 판단된다.

SDR 기반의 LFM 레이다 설계 및 구현 (LFM Radar Implemented in SDR Architecture)

  • 윤재혁;유승오;이동주;예성혁
    • 한국전자파학회논문지
    • /
    • 제29권4호
    • /
    • pp.308-315
    • /
    • 2018
  • 본 논문에서는 두 표적 간의 거리차를 정밀하게 계측할 수 있는 S-band 고 분해능 레이다 개발을 위한 시스템 기본 설계 및 구현 결과를 제시한다. 3.5 GHz LFM(Linear Frequency Modulation) 레이다 기본 설계를 위하여 제안하는 시스템 요구조건은 거리 분해능 1 m, 최대 계측 거리 2 km이며 레이다 방정식을 통해 각 모듈의 사양을 결정하였다. 최종적으로 150 MHz 대역폭, 송신 출력 43 dBm 전력 증폭기, 이득 26 dBi 안테나, 잡음 지수 8 dB 이하, RCS $1m^2$일 때, 표적과 레이다의 최대거리 2 km 기준 SNR이 30 dB 이상이 나올 수 있음을 확인할 수 있었다. 시뮬레이션 결과를 토대로 하드웨어 설계를 하였으며, SDR(Software Defined Radar) 장비를 이용한 LFM 레이다 설계 이론과 방법 그리고 야외 시험 결과를 보여주고 요구조건을 만족하는 레이다 시스템 설계가 가능함을 입증하였다.

흙 수로에 대한 삼수손실량 추정에 관한 실험적 연구 (Experimental Study on Seepage Losses in Earth Channel)

  • 정하우;유한열
    • 한국농공학회지
    • /
    • 제15권1호
    • /
    • pp.2853-2877
    • /
    • 1973
  • Models of cross-sections and channels were made in order to measure seepage losses. Cross-sections were made of sand, sandy clay loam and loam, their thicknesses being 30cm and 40cm, respectively. Flow depths kept in the cross-sections were 4cm, 6cm, 8cm and 10cm. Straight and curved channel models were provided so as to measure seepage losses, when constant water depths maintained at the heads of the channels were 7.3cm and 5.7cm, respectively. The results obtained in this experiment are presented as follows: 1) A cumulative seepage loss per unit length at a point in the channel varies in accordance with time and flow depth. The general equation of cumulative seepage loss may be as follows(Ref. to Table V.25): $$q_{cum}=\int_{o}^aq(a)dt+\int_a^bq(b)dt+\int_b^tq(c)dt$$ 2) In case that the variation of water depth through the channel is slight, the total seepage loss may be computed by applying the following general equation: $$\={q}_{cum}{\cdot}x=\int_o^tq_{cum}\frac{{\partial}x}{{\partial}t}dt$$ 3) Because seepage loss varies considerably according to water depth in case that the variation of flow depth through the channel is great, seepage loss should be computed by taking account of the change of flow depth. 4) The relation between time and traveling distance of water flow may be presented as the following general equation(Ref. to Table V.29): $$x=pt^r$$ 5) The ratios of the seepage losses of the straight channel to the curved channel are 1:1.03 for a flow depth of 7.3cm and 1:1.068 for that of 5.7cm. 6) The ratios of the seepage losses occurring through the bottom to those through the inclined plane in the channel cross-section are 1:2.24 for a water depth of 8cm and 1:2.47 for a depth of 10cm in case that soil-layer is 30cm in thickness. Similarly, those ratios are 1:2.62 and 1:2.93 in case of a soil-layer thickness of 40cm(Ref. to Table V.5).

  • PDF

하악 무치악 부위의 임플란트 이식을 위한 전산화단층촬영 영상의 비교 평가 (Comparative evaluation of computed tomography for dental implants on the mandibular edentulous area)

  • 선경훈;정호걸;박혁;박창서;김기덕
    • Imaging Science in Dentistry
    • /
    • 제39권1호
    • /
    • pp.27-33
    • /
    • 2009
  • Purpose: The purpose of this study was to evaluate the clinical usefulness of the recently developed multi-detector computed tomography and cone beam computed tomography in pre-operative implant evaluation, by comparing them with the single detector computed tomography, already confirmed for accuracy in this area. Materials and Methods: Five partially edentulous dry human mandibles, with $1{\times}1mm$ gutta percha cones, placed in 5mm intervals posterior to the mental foramen on each side of the buccal part of the mandible, were used in this study. They were scanned as follows: 1) Single detector computed tomography: slice thickness 1mm, 200mA, 120kV 2) Multi-detector computed tomography: slice thickness 0.75mm, 250mA, 120kV 3) Cone beam computed tomography: 15mAs, 120kV Axial images acquired from three computed tomographies were transferred to personal computer, and then reformatted cross-sectional images were generated using V-Implant $2.0^{(R)}$ (CyberMed Inc., Seoul, Korea) software. Among the cross-sectional images of the gutta perch a cone, placed in the buccal body of the mandible, the most precise cross section was selected as the measuring point and the distance from the most superior border of the mandibular canal to the alveolar crest was measured and analyzed 10 times by a dentist. Results: There were no significant intraobserver differences in the distance from the most superior border of the mandibular canal to the alveolar crest (p>0.05). There were no significant differences among single detector computed tomography, multi-detector computed tomography and cone beam computed tomography in the distance from the most superior border of the mandibular canal to the alveolar crest (p>0.05). Conclusion: Multi-detector computed tomography and cone beam computed tomography are clinically useful in the evaluation of pre-operative site for mandibular dental implants, with consideration for radiation exposure dose and scanning time.

  • PDF

지구통계기법과 표면파 다중채널분석을 이용한 포항 지반의 SPT-N value 교차검증 (Cross-Validation of SPT-N Values in Pohang Ground Using Geostatistics and Surface Wave Multi-Channel Analysis)

  • 김경오;한희수
    • 한국산학기술학회논문지
    • /
    • 제21권10호
    • /
    • pp.393-405
    • /
    • 2020
  • 지반 및 기초의 안정성 평가, 지진의 액상화 평가 등을 위해서 지반강도 및 지하수 높이 등 다양한 지반정보가 필요하다. 대한민국에서 행해지는 표준관입시험(Standard Penetration Test, SPT) 결과는 국토지반정보포털시스템에 등록하게 되어있다. 비시추지역의 지반정보가 필요할 경우, 지구통계기법(Geostatistics)들을 응용할 수 있다. 본 논문은 경험적 베이지안 크리깅(Empirical Bayesian Kriging, EBK)과 역거리 가중치법(Inverse Distance Weighting Method, IDWM)을 이용하여 비시추지역의 지반정보를 구할 경우의 타당성에 관한 것이다. 이 기법들을 이용하기 위해 공간 보간에 범용적으로 적용되는 Esri사의 ArcGIS Pro 프로그램을 사용하였다. 본 해석에 사용된 지구통계기법들의 정확성을 검토하기 위하여, 표준관입시험에서 구한 시추지역 지반의 강도 정수 및 지하수의 높이를 해석기법의 결과와 교차 검증하였다. 또한, 지구물리학적 기법인 표면파 다중채널분석(Multichannel Analysis of Surface Waves, MASW)조사를 추가 수행하여, 본 해석에 사용된 기법들을 재검증하였다. 포항 북구 지역을 1.0km×1.0km로 분할하여 총 111개의 구역으로 분할하였으며, 경험적 베이지안 크리깅(EBK) 및 역거리 가중치법(IDWM)을 통한 표준관입시험치 및 지하수위에 대한 교차검증을 수행한 결과, 두 기법 모두 적합한 것으로 나타났다. 표면파 다중채널분석(MASW)은 대략적인 구간 영역을 제시하여, SPT N값의 분포양상과 지하수위를 명확히 파악하기 곤란하였다.

Characterization of flow properties of pharmaceutical pellets in draft tube conical spout-fluid beds

  • Foroughi-Dahr, Mohammad;Sotudeh-Gharebagh, Rahmat;Mostoufi, Navid
    • Journal of Industrial and Engineering Chemistry
    • /
    • 제68권
    • /
    • pp.274-281
    • /
    • 2018
  • Experimental studies of the hydrodynamic performance of the draft tube conical spout-fluid bed (DCSF) were conducted using pharmaceutical pellets. The experiments were carried out in a DCSF consisted of two sections: (a) a conical section with the cross section of $120mm{\times}250mm$ and the height of 270 mm, (b) a cylindrical section with the diameter of 250 mm and the height of 600 mm. The flow characteristics of solids were investigated with a high speed camera and a pezoresistive absolute pressure transducer simultaneously. These characteristics revealed different flow regimes in the DCSF: packed bed at low gas velocities, fluidized bed in draft tube at higher gas velocities until minimum spouting, and spouted bed. The stable spouting was identified by the presence of two dominant frequencies of the power spectrum density of pressure fluctuation signature: (i) the frequency band 6-9 Hz and (ii) the frequency band 12-15 Hz. The pressure drops across the draft tube as well as the annulus measured in order to better recognize the flow structure in the DCSF. It was observed that the pressure drop across the draft tube, the pressure drop across the annulus, and the minimum spouting velocity increase with the increase in the height of draft tube and distance of the entrainment zone, but with the decrease in the distributor hole pitch. Finally, this study provided novel insight into the hydrodynamic of DCSF, particularly minimum spouting and stable spouting in the DCSF which contains valuable information for process design and scale-up of spouted bed equipment.

UAV와 Echo Sounder 취득 자료의 비교를 통한 저수지 하상의 공간 보간별 정확도 분석 (Analysis of Precision of Interpolation of Reservoir bed Through Comparison of Data Acquired by Using UAV and Echo Sounder)

  • 노태호
    • 한국지리정보학회지
    • /
    • 제23권3호
    • /
    • pp.85-99
    • /
    • 2020
  • 흐르는 물을 저장하여 공업, 농업, 상수도, 수력발전 등의 다양한 이용과 관광자원으로도 활용할 수 있는 저수지는 중요한 사회기반시설중의 하나이다. 그러므로 저수지의 유지관리는 행정 및 기술적 방안들을 동원하여 관리주체별로 정기적으로 수행되며, 저수지의 유지관리를 위해서는 저수지 하상 파악이 우선적이다. 이를 위하여 본 연구에서는 비교적 신뢰가 높은 Echo sounder를 이용한 방류전의 저수지 수심 측량과 방류후의 저수지 지형 측량을 UAV에 의하여 실시하였다. 그리고 수심 측량 자료를 Inverse Distance Weighting 보간, Kriging 보간, Minimum curvature 보간, Radial basis function 보간 등의 공간 보간별로 저수지의 내용적을 산출하여 UAV에 의한 방류 후 내용적 및 단면적을 비교 분석함으로 다음과 같은 결과를 알 수 있었다. 첫째, UAV에 의한 지형 자료와 Echo sounder에 의한 수심 자료를 공간 보간 기법별 적용 결과 Kriging 보간이 약 97%의 저수지 내용적 정확도를 확인 할 수 있었다. 둘째, 저수지 하상의 형상 비교를 위하여 검토 단면 설정 후 지형 선형과 보간별 선형의 상이 면적차를 비교한 결과 Kriging 보간이 최소 단면적 차이를 보임으로 지형 선형과의 가장 유사 형상임을 알 수 있었다. 따라서 Echo sounder에 의해 취득된 수심 자료로 저수지 하상의 최적 모델링 구축시 저수지의 효율적 유지관리에 기초적 자료 제공이 가능하리라 판단된다.

지역 언론에 내재한 연고 네트워크 구조에 대한 연구: 밀집 경향과 지형상의 특성 분석을 중심으로 (A Study on Personal Network Structure of Local Press Organizations in Korea)

  • 권장원
    • 한국언론정보학보
    • /
    • 제33권
    • /
    • pp.53-86
    • /
    • 2006
  • 본 연구는 지역 언론에 내재한 연고 네트워크 구조를 밀도와 지형상의 특성을 분석함으로써 지역 언론에 내재한 연고 네트워크 구조의 지역별 비교 분석을 그 목적으로 한다. 연구 목적을 달성하기 위해 설정한 연구문제는 첫째, 지역 언론사들에 내재한 연고에 따른 밀도 특성, 둘째, 지역 방송사 내의 언론조직과 신문사 조직 간의 연고에 입각한 밀도 비교, 세 번째, 지역 언론사 조직 구성원들의 연고에 따른 지형적 특성이다. 본 연구를 수행하기 위해 문민정부와 국민정부 시기에 지역의 광역시에 소재하고 있는 주요 일간지와 지역 방송사의 뉴스 조직을 분석 대상으로 설정하였으며, 밀도 분석과 교차 분석, 그리고 대응 분석 방법을 병행하여 활용하였다. 분석 결과, 각 지역에 소재하고 있는 언론사 내부 조직 구성원의 집중 경향을 교차분석과 밀도분석을 통해 살펴본 결과, 해당 신문사의 지역적 기반과 근접한 지역 출신 인사들을 중심으로 신문사와 방송사 공히 조밀한 구조를 보이고 있으나, 특히, 신문사가 방송사 내부의 뉴스 조직에 비해 집중 경향이 더욱 높은 것으로 분석되었다. 아울러, 대응 분석을 통해 지역 언론사의 위치상의 특성을 분석한 결과, 출신 지역에 있어서는 직위에 관계없이 위치상의 차이가 명확하게 나타나고 있으며, 출신 대학의 경우 이사진과 실무진 간의 위치적 차이가 드러나고 있다는 점이 특징적이다.

  • PDF

테라헤르츠 이미징기법을 이용한 유화의 상태분석 및 진단 (Study of Condition Analysis and Diagnosis on Oil Paintings with Terahertz Imaging)

  • 백나연;송유나;김문정;정용재;이한형
    • 보존과학회지
    • /
    • 제35권3호
    • /
    • pp.237-244
    • /
    • 2019
  • 본 연구에서는 우리나라 근대시기 유화 작품 3점('소년', '소녀', '혜화동풍경')에 테라헤르츠 이미징 기법을 활용하여 추출 가능한 작품 내부 정보의 종류와 이를 추출하기 위한 분석 조건을 연구하였다. 또한 테라헤르츠 스캔 적용 시 대상 작품의 굴곡에 따라 분석 대상 표면과 검출부 사이의 거리가 변화되어 발생하는 이미지 왜곡이 주된 문제점임을 파악하고, 이를 보완하기 위한 방법으로 '작동 거리 유지 장치'를 고안하였다. 연구 결과, 테라헤르츠 이미징 기법을 이용하여 유화의 바탕재 특성과 내부의 손상형태를 파악할 수 있음을 확인하였고 각 특성을 확인할 수 있는 최적의 조건을 제시하였다. 바탕재의 특성과 하부층 확인에는 테라헤르츠 주파수 분해 이미지를 활용하는 것이 유용하였으며 붓터치 등 채색기법을 파악하는 것에는 최대 반사피크 이미지와 단면 이미지가 효과적이었다. 또한 표면에서 관찰할 수 없는 작품 내부 손상 정보는 단면 이미지와 주파수 분해 이미지를 비교하는 것이 유용하였다. 회화작품에 적용한 결과, '소년'과 '소녀'에서는 내부의 구조적 손상 자국을, '혜화동풍경'에서는 작가의 채색 방식을 확인하였다. 이상의 결과는 우리나라 근대기 유화의 예방보존 및 보존처리를 위한 상태분석 및 진단에 활용될 수 있을 것으로 기대된다.

일부 젊은 성인들의 수지 정적 이점식별 (Static Two-Point Discrimination of Fingertips in Young Adults)

  • 이승주;조명숙
    • The Journal of Korean Physical Therapy
    • /
    • 제16권4호
    • /
    • pp.218-225
    • /
    • 2004
  • OBJECTIVES: This study was performed to find out static two-point discrimination (TPD) in fingertips. METHODS: This was a cross-section, measure study of static two-point discrimination involving healthy young adults. Measure was completed by 48 college students in Andong Science College from June 1 to 12, 2004. The minimal distance at which two-points could be discriminated was measured from thumb to little finger. RESULTS: For dermatomal regions of the fingertip, mean values ranged from 3.3mm to 4.9mm (thumb 3.6mm, index finger 3.3mm, middle finger 3.8mm, ring finger 4.2mm, and little finger 4.7mm in the left hand; thumb 3.7mm, index 3.5mm, middle 4.0mm, ring 4.3mm, and little 4.9mm in the right hand). A significant difference in discrimination ability was found between men and women, 3.5mm for women showed a greater sensitivity than 4.1mm for men in the left middle fingertip(p=0.0109), also 3.9mm for women showed a greater accuracy than 4.5mm for men in the left ring fingertip(p=0.0388). In the right index fingertip, women (3.1mm) have a narrow distance than men (3.6mm)(p=0.0329). The minimal distance of TPD was found a significant difference between 20 and 30 years in age. 4mm for 30 years showed a greater distance than 3.5mm for 20 years in the left thumb fingertip(p=0.0354), also, 3.8mm for 30 years showed a greater distance than 3.2mm for 20 years in the left index fingertip(p=0.0174), and 4.3mm for 30 years showed a greater distance than 3.7mm for 20 years in the left middle fingertip(p=0.0444). In the right index fingertip, 20 years (3.2mm) had also a narrow distance than 30 years (4.1mm)(p=0.0020), 20 years (3.9mm) showed a narrow distance than 30 years (4.6mm) in the right middle fingertip(p=0.0124), and 20 years (4.1mm) showed a greater sensitivity than 30 years (5.0mm) in the right ring fingertip(p=0.0070). CONCLUSIONS: Our results suggest that distance of TPD in the both index fingertips for 20 years women was significantly narrowed.

  • PDF