• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.363-366
• /
• 2016

In this paper, we propose a method for detecting pedestrian, problem-solving situations that occur in a cross. When a pedestrian crossing and other, there occurs a problem of detecting the other pedestrians for detecting a specific pedestrian in the image. The proposed method for solving the problem is as follows. First, select a specific pedestrian detected by bounding box, and extracts the area as a template. Detecting a pedestrian from the image using the HOG, and designated as a candidate region. The final choice of the pedestrian detected by comparison with a candidate pedestrian with the specific pedestrian extracted for template. In comparison, using the Template matching, Histogram comparison and LBP.

• Journal of Mechanical Science and Technology
• /
• v.16 no.6
• /
• pp.785-798
• /
• 2002

A reliable analytic model that predicts the surface profile of the exit cross section of workpiece in round-oval (or oval-round) pass sequence is established. The presented model does not require any plasticity theory but needs the only geometric information on workpiece and roll groove. Formulation is based on the linear interpolation of the radius of curvature of an incoming workpiece and that of roll groove in the roll axis direction when the maximum spread of workpiece is known beforehand. The validity of the analytic model is examined by hot rod rolling experiment with the roll gap, specimen size, design parameter of oval groove and steel grade changed. Results revealed that the cross sectional shapes predicted by the model were in good agreement with those obtained experimentally. We found that the analytic model not only has simplicity and accuracy for practical usage but also saves a large amount of computational time in comparison with finite element method.

• Nuclear Engineering and Technology
• /
• v.27 no.4
• /
• pp.491-502
• /
• 1995

In accurate prediction of cross-flow based on detailed knowledge of the velocity field in subchannels of a nuclear fuel assembly is of importance in nuclear fuel performance analysis. In this study, the low-Reynolds number k-$\varepsilon$ turbulence model has been adopted in too adjacent subchannels with cross-flow. The secondary flow is accurately estimated by the anisotropic algebraic Reynolds stress model. This model was numerically calculated by the finite element method and has been verified successfully through comparison with existing experimental data. Finally, with the numerical analysis of the velocity Held in such subchannel domain, an analytical correlation of the lateral loss coefficient is obtained to predict the cross-flow rate in subchannel analysis codes. The correlation is expressed as a function of the ratio of the lateral How velocity to the donor subchannel axial velocity, recipient channel Reynolds number and pitch-to-diameter.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.47 no.1
• /
• pp.123-136
• /
• 2023

To develop smart sportswear capable of measuring biometric data, we created a close-fitting pattern using two- and three-dimensional (2D and 3D, respectively) methods. After 3D virtual fitting, the tightness of each pattern was evaluated using image processing of contact points, mesh deviation, and cross-sectional shapes. In contact-point analysis, the 3D pattern showed high rates of contact with the body (84.6% and 93.1% for shirts and pants, respectively). Compared with the 2D pattern, the 3D pattern demonstrated closer contact at the lower chest, upper arm, and thigh regions, where electrocardiography and electromyography were primarily carried out. The overall average gap was also lower in the 3D pattern (5.27 and 4.66 mm in shirts and pants, respectively). In the underbust, waist, thigh circumference, and mid-thigh circumference, the cross-section distance between clothing and body was showed a statistically significant difference and evenly distributed in the 3D pattern, exhibiting more closeness. The tightness and fit of the 3D smart sportswear sensor pattern were successfully evaluated. We believe that this study is critical, as it facilitates the comparison of different patterns through visualization and digitization through 3D virtual fitting.

• Journal of the Korean Society of Fashion and Beauty
• /
• v.4 no.1 s.7
• /
• pp.42-50
• /
• 2006

This study used the questionnaire method to find out the golf factor comparison and purchase inclination according the golfers' demographic characteristics. The golf factor comparison according to the Gyeongnam golfers' demographic characteristics was performed with cross analysis and $X^2$ verification, the purchase inclination with T verification and analysis of variance. And the Golfs' factor relation according to total income was performed with cross analysis and $x^2-test$. The golfers' demographic characteristics showed a significant difference in gender, educational background and occupations. The participation purposes of playing golf for men were as a hobby, relations and business. And the participation purposes of playing golf for women were as a hobby and health. The higher age was, the more the golf career was for both men and women. In the factor of marital status, unmarried people play for a hobby and married people play for better relations and business. In the factor of gross income, male golfers varied in the gold career and monthly playing times. Female golfers varied in the golf career. Regardless of gender, the higher the income was, the more the golf career was. In the comparison of buy behavior according to the golfers' demographic characteristics, male golfers showed a significant difference in ostentation and fashion according to the monthly purchase of golf-wear. The group that spends more on the monthly purchase of golf wear was higher than the group that spends less on the monthly purchase of golf wear. Unmarried golfers showed more ostentation tendency that married golfers.

• International Journal of Advanced Culture Technology
• /
• v.3 no.2
• /
• pp.34-41
• /
• 2015

Bonding strength of a thermal sprayed coating is difficult to measure using a conventional pull-off test method. Scratch test is a potential alternative testing method. An adhesive and a cohesive bond strength of the coating can be measured by the pull-off test while the scratch test performed on the cross-section of the thermal sprayed coating can only demonstrate the cohesive bond strength of the coating. Nevertheless, it is still beneficial to perform the scratch testing on the cross-section of the coating for the sake of comparison thus providing an alternative to the pull-off test. The scratch test method can reduce testing time and cost in the long run due to a significant cost reduction in consumables and energy and time saving from the curing step of the glue used in the pull-off test. This research investigates the possibility of using the scratch test to measure the cohesive bond strength of Mo/NiCrBSi composite coating. The results from the pull-off test and the scratch test indicate that the cohesive bond strengths of the Mo composite coating show similar trend and that the cohesive bond strength are increased when increasing NiCrBSi content.

• Journal of Information Technology Services
• /
• v.3 no.1
• /
• pp.63-77
• /
• 2004

The purpose of this research is to identify what factors influence a customer's purchasing intention and to identify if customer's attitudes are different between an Internet shopping mall in Singapore and Korea. To perform a cross-nation analysis between Singapore and Korea, this research reapplied the finding of Liao and Cheung(2001) in a Singapore Internet shopping mall, including transactions security, Internet usage, price, shopping experience, vendor quality, network speed. The empirical results of this research indicate that all hypotheses in our model are significant; therefore, Internet usage, price, vendor quality and network speed influence customer's purchasing intention positively and transactions security and shopping experience negatively. The results of a cross-nation analysis indicate that customer's attitudes in both Singapore and Korea are the same. Therefore, Asia's with similar cultures are the same factors In Internet shopping mall. In Conclusion, with the rapid growth of the Internet market in Asia, many cross-nations researches based on Asia culture must be published. Therefore, this research will be the foundation of these researches.

• Journal of Bone Metabolism
• /
• v.25 no.4
• /
• pp.267-274
• /
• 2018

Background: This prospective cohort study used nationwide claims data to investigate the incidence of fall and fragility fractures in association with urinary incontinence (UI) in the elderly, and to compare mortality after fragility fractures in elderly patients with or without incontinence. Methods: A total of 39,854 Korean adults (age, 66-80 years) who participated in health examinations between 2007 and 2012 and were followed up until 2015 were analyzed. Patient and comparison groups were classified according to the presence or absence of UI. The cumulative incidence of osteoporotic fragility fractures and falls in the 2 groups was assessed and compared. Hazard ratios for fragility fractures were calculated for the risk of UI in association with falls using a Cox proportional hazards model. Results: Of 39,854 elderly participants, 5,703 were classified in the UI group, while 34,151 were placed in the comparison group. Fall rates were significantly higher (20.8%) in the incontinence group than in the comparison group (4.7%) (P<0.001). Women in the incontinence group (13.9%) showed a significantly higher incidence of all types of fragility fractures than those in the comparison group (11.8%) (P=0.005). After adjustment for confounders, UI was not a significant risk factor for fragility fractures in men (P=0.878) or women (P=0.324). Conclusions: This study demonstrated that elderly women with UI have a significantly higher incidence of osteoporotic fragility fractures. In addition, elderly women are at higher risk for falls.

• Korean Journal of Veterinary Research
• /
• v.39 no.4
• /
• pp.743-750
• /
• 1999

Bovine viral diarrhea viruses (BVDVs) were isolated from cattle with respiratory and diarrhea signs as well as persistently infected cattle. These isolates were analysed serologically to characterize serogroups and to compare serological relationship with reference viruses of type I and II. Most isolates from calf diarrheal cases and persistently infected individuals showed a significant difference in cross-neutralization test with the viruses isolated from nasal discharges showing severe respiratory signs. Serologically most of the commercial vaccine strains could be classified into classical BVDV (type I) such as NADL strain. This serological difference among BVDV isolates suggested the need for new vaccines to protect cattle from both respiratory and enteric BVDV infections in field. The immunogenicity of BVDVs which showed a good propagation capability in MDBK cells and high rates of neutralizing activity (isolate : KD26-1, PHG, B5 and 95002) against all viruses used in this study, was confirmed in guinea pig when treated as single or combined groups.

• Journal of the Korean Wood Science and Technology
• /
• v.47 no.5
• /
• pp.547-556
• /
• 2019

Thinned, small larch logs have small diameters and no value-added final use, except as wood chips, pallets, or fuel wood, which are products with very low economic value; however, their mechanical strength is suitable for structural applications. In this study, small larch logs were sawed, dried, and cut into square timbers (with a $90mm{\times}90mm$ cross section) that were laterally glued to form core panels used to manufacture cross-laminated timber (CLT) wall panels. The surface and back of these core panels were covered with 12-mm-thick structural plywood panels, used as cross bands to obtain three-ply CLT wall panels. This attachment procedure was conducted in two different ways: gluing and pressing (CGCLT) or gluing and nailing (NGCLT). The size of the as-manufactured CLT panels was $1,220mm{\times}2,440mm$, the same as that of the plywood panels. The final wall panels were tested under lateral shear force in accordance with KS F 2154. As the lateral load resistance test required $2,440mm{\times}2,440mm$ specimens, two CLT wall panels had to be attached in parallel. In addition, the final CLT panels had tongued and grooved edges to allow parallel joints between adjacent pieces. For comparison, conventional light-frame timber shear walls and midply wall systems were also tested under the same conditions. Shear walls with edge nail spacing of 150 mm and 100 mm, the midply wall system, and the fabricated CGCLT and NGCLT wall panels exhibited maximum lateral resistances of 6.1 kN/m (100%), 9.7 kN/m (158%), 16.9 kN/m (274%), 29.6 kN/m (482%), and 35.8 kN/m (582%), respectively.