• Polymer(Korea)
• /
• v.28 no.1
• /
• pp.51-58
• /
• 2004

The molecular cluster model for the homogeneous bubble nucleation rather than the classical nucleation theory was extended to predict the bubble nucleation events in elastomers(cross-linked polymers), polymers and polymer which are dissolved in the organic solvent. The classical theory assumes the formation of the critical bubble while the molecular cluster model assumes the critical cluster as for the initiation of the bubble nucleation. For the bubble nucleation in elastomers and polymers, the strain energy overcome by a critical bubble was also considered. The calculation results for the number of bubbles nucleated in elastormers and polymer solutions, which are about 10$\^$8/∼10$\^$12/ bubbles/㎤ are in good agreement with observed ones.

• Applied Chemistry for Engineering
• /
• v.19 no.3
• /
• pp.299-303
• /
• 2008

A thermally cross-linkable polymer, poly[(2,5-dimethoxy-1,4-phenylenevinylene)-alt-(1,4-phenylenevinylene)] (Cross-PPV), was synthesized by the Heck coupling reaction. In order for the polymer to be cross-linkable, 20 mol% excess divinylbenzene was added. The chemical structure of Cross-PPV and thermally crosslinked Cross-PPV were confirmed by FT-IR spectroscopy. From the FT-IR, UV-Vis, and PL spectral data, thermally crosslinked Cross-PPV was insoluble in common organic solvents. The HOMO and LUMO energy level of thermally cross-linked Cross-PPV were estimated -5.11 and -2.56 eV, respectively, which were determined by the cyclic voltammetry and UV-Vis spectroscopy. From the energy level data, one can easily notice that thermally crosslinked Cross-PPV can be used for hole injection layer effectively. Bilayer structured device (ITO/crosslinked Cross-PPV/PM-PPV/Al) was fabricated using poly(1,4-phenylenevinylene-(4-dicyanomethylene-4H-pyran)-2,6-vinylene-1,4-phenylenevinylene-2,5-bis(dodecyloxy)-1,4-phenylenevinylene (PM-PPV) as the emitting layer, which have HOMO and LUMO energy levels of -5.44 eV and -3.48 eV, respectively. The bilayered device had much enhanced the maximum efficiency (0.024 cd/A) and luminescence ($45cd/m^2$) than those of a single layer device (ITO/PM-PPV/Al, 0.003 cd/A, $3cd/m^2$). The enhanced performance originated from that fact that cross-linked Cross-PPV facilitatse the hole injection to the emissive layer and the injected hole and electron from ITO and Al are recombined in emitting layer (PM-PPV) effectively.

• Journal of Pharmaceutical Investigation
• /
• v.36 no.2
• /
• pp.83-87
• /
• 2006

Poly(acrylic acid) (PAA) was identified to possess good mucoadhesive properties ensuring its application to extend the retention times of the formulations at the oral cavity, intended route of administration using the polymer. In the noncross-linked state, PAA will swell and become eroded owing to the presence of salivary flow from the site of application. The formation of cross-links between the polymer chains will allow swelling but prevents the erosion of the dosage form. In the current study, cross-linking was achieved by esterification of the PAA chains with sucrose. The density of crosslinking was modified by changing sucrose concentration and the duration of cure time. The cross-linking density of the polymer hydrogel was assessed by equilibrium swelling studies. The mucoadhesion testing method allowed a comparative study of the hydrogels prepared. An inverse relationship between equilibrium swelling and peak detachment force showed that increased PAA chain density per unit area enhanced the mucoadhesive interaction.

• Journal of Biomedical Engineering Research
• /
• v.17 no.3
• /
• pp.291-296
• /
• 1996

Poly(ethylene glycol)(PEG) macromers terminated with diacrylate Iyoups and interpenetrating poly- mer networks(IPN) composed of poly(hydroxyethyl methacrylate)(PHEMA) or poly(hydroxyethyl methacrylate-co-hydronypropyl methacrylate-co- N-vinyl pyrrolidone ) [ P( HEM A-co- HPM A-co- NVP) ] and PEG macromer were synthesized with the aim of obtaining protein adsorption resistant soft contact lens. Polymerization of PEC macromer resulted in the formation of cross-linked gels due to the multifunctionality of macromer. Crosslinked P(HEMA) or P(HEMA-co-HPMA-co-WVP) chains were interpenetrated into the cross-linked three-dimensional networks of PEG. It was found that albumin adsorption onto the contact lens prepared by P(HEMA-co-HPMA-co-NVP) /PEG IPW decreases with an increase of molecular weight of PEG. Also, it was found that albumin adsorption onto the both contact lens decreases with an increase of concentration of PEC macromer in the IPN preparation. There are also more adequate in the bioinertnen for the contact lens by P(HEMA)/PEG IPN or P (HEMA-co-HPMA-co-NVP)/PEG IPN than that by P(HEMA) or P(HEMA-co-HPMA-co-NVP)

• Bulletin of the Korean Chemical Society
• /
• v.30 no.3
• /
• pp.551-555
• /
• 2009

The ytterbium catalyst immobilized on the cross-linked poly(4-vinylpyridine/styrene) copolymer (P/S-Yb) was applied in the Mannich-type, three component one-pot synthesis of $\beta$-aminoketones. This catalytic system showed excellent catalytic activity and selectivity which resulted in the exclusive formation of $\beta$-aminoketone. The applicability of this immobilized catalyst system was shown by the reusability test and again highlighted by the synthesis of a $\beta$-aminoketone library using a broad range of substrates.

• Journal of Pharmaceutical Investigation
• /
• v.41 no.5
• /
• pp.279-288
• /
• 2011

The Dexamethasone (DEX) loaded chitosan microspheres were prepared by thermal denaturation and chemical cross-linking method using a dierent concentration of glutaraldehyde as chemical cross-linking agent. The prepared microspheres were evaluated for the percentage of Drug Loading (DL), Encapsulation Efficiency (EE) and surface morphology by Scanning Electron Microscopy (SEM). DL and EE were found to be maximum range of 10.0 to 10.79 % and 58.19 to 64.73 % respectively. The SEM Photographs of the resultant microspheres exhibited fairly smooth surfaces and predominantly spherical in appearance. In addition, Fourier Transform Infrared Spectroscopy (FTIR) and Differential Scanning Calorimetry (DSC) shown that there was no interaction between the drug and polymer. In vitro and in vivo release studies revealed that the release of dexamethasone was sustained and extended up to 63 days and effectively controlled by the extent of cross-linking agent. Non-clinical parameters such as paw volume, hematological parameters like Erythrocyte Sedimentation Rate (ESR), Paced Cell Volume (PCV), Total Leucocytes Count (TLC), Hemoglobin (Hb), Differential Cell Count (DCC) were investigated in Fruend's Complete Adjuvant (FCA) induced arthritic rats. Radiology and histopathological studies were also performed in order to evaluate the therapeutic efficacy of the DEX-loaded microspheres in extenuating the rat arthritic model.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.10a
• /
• pp.94-94
• /
• 2003

Cross-linked polystyrene (PS) particles with carboxyl and/or poly(ethylene glycol) units on surface were formed by an emulsifier-free emulsion polymerization using styrene, methacrylic acid (MA), and poly(ethylene glycol) dimethacrylate (PEG-diMMA) at pH 7, and followed by freeze-drying to give the corresponding powders. Monodisperse polymer particles could be obtained at a concentration of PEG-diMMA 1 mol% relative to styrene. Zeta potential of polymer surface was measured to be 91 mV at a polymer of PEG-diMMA 1 mol% and was dropped as the content of MA increased.

• Journal of the Korean Electrochemical Society
• /
• v.5 no.4
• /
• pp.197-201
• /
• 2002

In this study, a gel polymer electrolyte was prepared from urethane acrylate and its electrochemical performances were evaluated. And, $LiCoO_2/GPE/graphite$ cells were prepared and their performances depending on discharge currents and temperatures were evaluated. The precursor containing $5 vol\%$ curable mixture had a low viscosity relatively. Ionic conductivity of the gel polymer electrolyte at room temperature and $-20^{\circ}C$ was ca. $5.9\times10^{-3}S{\cdot}cm^{-1}\;and\;1.7\times10^{-3}S{\cdot}cm^{-1}$, respectively. GPE showed electrochemical stability up to potential of 4.5V vs. $Li/Li^+.LiCoO_2/GPE/graphite$ cell showed a good high-rate and a low-temperature performance.

• Transactions of the Korean hydrogen and new energy society
• /
• v.28 no.4
• /
• pp.338-344
• /
• 2017

Polyoxometal molybdophosphoric acid (MoPA) bonded polyether ether ketone (PEEK) composite membrane for water electrolysis has been investigated. The composited membrane, covalently cross linked (CL) sulfonated polyether ether ketone (SPEEK) with a bonded MoPA, was prepared in sulfonation of PEEK, cross linkage reaction with 1,4-diiodobutane, and addition with MoPA. PEEK was covalently cross-linked with 1,4-diiodobutane to improve mechanical strength and was added with MoPA to increase proton conductivity. MoPA should be fixed to back bone of SPEEK to prevent bleeding out. Therefore, the carbonyl group of SPEEK was reduced with NaBH4 and 3-isocyanatepropyltriethoxysilane (ICPTES) was added. The MoPA bonded composite was produced in the reaction of MoPA with 3-mercaptopropyltrimethoxvsilane (MPTMS). In conclusion, MoPA bonded CL-SPEEK composite membrane featured 0.129 S/cm of proton conductivity at $80^{\circ}C$, and 2,156 hours of chemical stability in Fenton test. These properties are better than those of membranes of other SPEEK system.

• Bulletin of the Korean Chemical Society
• /
• v.16 no.11
• /
• pp.1109-1112
• /
• 1995

Bis(silyl)alkylbenzenes such as bis(1-sila-sec-butyl)benzene (1) and 2-phenyl-1,3-disilapropane (2) were prepared in high yields by reduction of the corresponding chlorosilanes with LiAlH4. The dehydropolymerization of 1 and 2 was carried out with group 4 metallocene complexes generated in situ from Cp2MCl2/Red-Al and Cp2MCl2/n-BuLi (M=Ti, Hf), producing two phases of polymers. The TGA residue yields of the insoluble polymers were in the range of 64-74%. The molecular weights of the soluble polymers produced ranged from 700 to 5000 (Mw vs polystyrene) and from 500 to 900 (Mn vs polystyrene). The dehydropolymerization of 1 and 2 seemed to initially produce a low-molecular-weight polymer, which then underwent an extensive cross-linking reaction of backbone Si-H bonds, leading to an insoluble polymer.