• Proceedings of the Korean Vacuum Society Conference
• /
• 1992.02a
• /
• pp.3-10
• /
• 1992

pphotostimulated desorpption of NO chemisorbed on ppt(001) at 80K has been studied by the (1+1)-resonance-enhanced multipphoton ionization((1+1)-REMppI) technique. A linearly ppolarized ArF excimer laser ( =193 nm, 6.41eV) is used as the ppumpp laser. A high adsorpption rate selectivity was found in the expposure deppendence of the NO desorpption yield. The NO desorpption yield increases drastically when the amount of NO expposure exceeds ~1.8 L. This result shows that the amount of NO sppecies with a large cross section for pphotostimulated desorpption increases drastically at higher NO coverages. Using scanning tunneling microscoppy, we have observed structural modifications of the chlorinated Si(111)-7$\times$7 surface induced by 266nm laser irradiation. At very low laser fluence of 0.7mJ/$\textrm{cm}^2$, at which thermal desorpption can be ignored, a pperiodic stripped ppattern of a single domain is imaged. This ppattern consists of flat terraces and narrow grooves of ~60 and ~10A in width, resppectively.

• Journal of Sensor Science and Technology
• /
• v.20 no.1
• /
• pp.46-52
• /
• 2011

In this paper, the swept source-optical coherence tomography system using frequency domain mode locked(FDML) laser has realized. The FDML swept source laser showed 55.03 kHz sweeping speed, 125 nm sweeping range, and 9 mW output optical power, which are the superiority of FDML laser compared to previous swept source lasers. Also, through the cross-sectional image captured at 5 frames per second for a mirror, a 1 mm-thickness glass plate, and a thumb bottom, the performance of the system has demonstrated.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.14 no.2
• /
• pp.17-26
• /
• 2006

The flutter characteristics of all movable tail wing with honeycomb sandwich structure have been studied in this study. The present wing model has a airfoil cross section and the linear variation of spanwise thickness. Structural vibration analysis is performed based on the finite element method using sandwich and beam elements. Unsteady aerodynamic technique used on the doublet lattice method has been effectively used to conduct the frequency-domain flutter analyses. The parametric flutter studies have been performed for various structural design parameters. Computational results on flutter stability due to the variation of structural parameters are presented and its related characteristics are investigated through the comparison of results.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.841-848
• /
• 2008

This paper examined dynamic characteristics of high speed trains using a time varying frequency transform. Fourier transform based methods are frequently used for the calculation of the dynamic characteristics of trains in the frequency domain, but they cannot represent the time-varying characteristics. Therefore it is necessary to examine their characteristics using a time-varying frequency transform. For the examination, the non-stationary vibration of wheelset, bogie, and carbody are measured using accelerometers and stored in a data aquisition system. They are processed with localization of the data by modulating with a window function, and Fourier transform is taken to each localized data, called the short-time Fourier transform. From the processed results, time varying auto-spectral density, cross-spectral density, frequency response, and coherence functions have been calculated. From the analysis, it is confirmed that the time varying frequency transform is a useful method for analyzing the dynamic characteristics of high speed trains.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.30B no.4
• /
• pp.44-55
• /
• 1993

In this paper, we proposed a new optical method for the efficient recognition of Korean characters. There are six filters in the proposed method which employed the concepts of amplitude-modulated phase-only filter(AMPOF) and spatial frequency modulation(SFM). Here, amplitude modulation is used to achieve improved correlation discrimination and SFM is to reduce the number of filters. We also used a simplified synthetic discriminant function(SDF) for distortion invariance of input image. In order to recognize the partial rotation invariant Korean characters, the proposed distortion invariant minimum average correlation energy (MACE) filter is synthesized SFM, partial rotation invariant filter (PRIF), AMPOF and MACE for partial rotation invariance in the frequency domain. The advantage of the proposed filters is to supress the sidelobes of cross correlation peak away from the autocorrelation peak and to produce sharp correlation peaks. We performed simulation and optical experiment for some of Korea characters using the proposed method. The results show that the proposed method has more improved discriminant ability and reduced processing time than the conventional methods.

• Steel and Composite Structures
• /
• v.20 no.3
• /
• pp.693-718
• /
• 2016

This paper presents a finite element procedure based on Bridging multi-scale method (BMM) in order to incorporate the effect of local/cross-sectional deformations (e.g., flange local buckling and web crippling) on the global behaviour of thin-walled members made of fibre-reinforced polymer composite laminates. This method allows the application of local shell elements in critical regions of an existing beam-type model. Therefore, it obviates the need for using computationally expensive shell elements in the whole domain of the structure, which is otherwise necessary to capture the effect of the localized behaviour. Consequently, highly accurate analysis results can be achieved with this method by using significantly smaller finite element model, compared to the existing methods. The proposed method can be used for composite polymer laminates with arbitrary fibre orientation directions in different layers of the material, and under various loading conditions. Comparison with full shell-type finite element analysis results are made in order to illustrate the efficiency and accuracy of the proposed technique.

• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2262-2264
• /
• 2003

본 논문에서는 도선의 결함 유무와 결함 위치를 측정하는 방법으로 널리 사용되고 있는 시간 영역 반사파 처리 기법(Time Domain Reflectometry : TDR)의 성능 향상을 위하여 가우시안 형태를 가지는 입력 신호와 상호 상관 관계 함수를 이용한 신호 처리 방법을 제안한다. 일반적으로 TDR은 입력 신호와 반사 신호의 시간 지연을 측정해서 결함 위치를 측정하게 되므로, TDR 방법으로 결함 위치를 측정하는데 있어 시간축 분해능의 정도에 따라 측정 방법의 성능이 크게 좌우된다. 따라서, 본 논문에서는 제한된 시간축 분해능에서 결함 위치 측정의 정확도를 향상시키기 위해 가우시안 형태를 갖는 입력 신호 및 반사 신호와의 상호 상관관계 함수를 사용한다. 한편, 실제 도선에 적용하여 기존의 TDR 방법과 측정 성능을 비교 분석함으로써 본 논문에서 제안하는 방법의 우수성을 검증한다.

• Journal of Menopausal Medicine
• /
• v.24 no.3
• /
• pp.188-195
• /
• 2018

Objectives: This study investigated the association between menopausal-specific quality of life (MENQOL) and breast cancer screening beliefs among Hong Kong Chinese menopausal and postmenopausal women. Methods: A cross-sectional study was employed to collect data. The questionnaire was distributed to a convenience sample of 218 women aged above 45. The outcome variables were breast cancer screening beliefs and breast examination. Multiple regression analyses were conducted to test the effect of 4 domains in MENQOL (vasomotor, psycho-social, physical, and sexual symptom) and the health behaviors on the 2 outcome variables. Results: This study found that the overall MENQOL scores (in particular psycho-social, and physical aspects) were significantly associated with positive attitudes toward health check-ups and better knowledge and perceptions in breast cancer. Regular exercise was also significantly related to breast examination. Conclusions: MENQOL (especially psycho-social and physical domain) and regular exercise are important factors associated with breast cancer screening beliefs. The results of this study illuminate health care professionals to develop primary health care strategies to improve the quality of life of mid-life women.

• Nuclear Engineering and Technology
• /
• v.51 no.3
• /
• pp.784-791
• /
• 2019

In the present study, a series of tungsten austenitic stainless steel alloys have been developed by interchanging the molybdenum in standard SS316 by tungsten. This was done to minimize the long-life residual activation occurred in molybdenum and nickel after decommissioning of the power plant. The microstructure and mechanical properties of the prepared alloys are determined. For the sake of increasing multifunction property of such series of tungsten-based austenitic stainless steel alloys, gamma shielding properties were studied experimentally by means of NaI(Tl) detector and theoretically calculated by using the XCOM program. Moreover, fast neutrons macroscopic removal cross-section been calculated. The obtained combined mechanical, structural and shielding properties indicated that the modified austenitic stainless steel sample containing 1.79% tungsten and 0.64% molybdenum has preferable properties among all other investigated samples in comparison with the standard SS316. These properties nominate this new composition in several nuclear application domains such as, nuclear shielding domain.

• International Journal of Internet, Broadcasting and Communication
• /
• v.13 no.1
• /
• pp.168-179
• /
• 2021

With the introduction of China's new policies, the Chinese animation industry has gradually formed a sustainable industrial structure chain, and the output value of the animation market is also in a state of continuous growth. Since 2013, domestic animation has been developing from "lower age" to "ageing" and "adults". At the same time, with the popularization of China's pan-entertainment industry model, the multi-domain symbiosis of the Internet and mobile Internet has been realized, creating a fan economy of star IP (Intellectual Property), and promoting the linkage of various industries under the same IP. This paper mainly analyzes the development of the animation IP market in China's pan-entertainment mode in recent years, and analyzes the cross-media operation mode of the animation industry. At the same time, it studies the application of self-media in animation.