• Structural Engineering and Mechanics
• /
• v.64 no.4
• /
• pp.403-411
• /
• 2017

In this article, analytical solution for free vibration of micro composite laminated beam on elastic medium based on modified couple stress are presented. The surrounding elastic medium is modeled as the Winkler elastic foundation. The governing equations and boundary conditions are obtained by using the principle of minimum potential energy for EulerBernoulli beam. For investigating the effect of different parameters including material length scale, beam thickness, some numerical results on different cross ply laminated beams such as (90,0,90), (0,90,0), (90,90,90) and (0,0,0) are presented on elastic medium. Free vibration analysis of a simply supported beam is considered utilizing the Fourier series. Also, the fundamental frequency is obtained using the principle of Hamilton for four types of cross ply laminations with hinged-hinged boundary conditions and different beam theories. The fundamental frequency for different thin beam theories are investigated by increasing the slenderness ratio and various foundation coefficients. The results prove that the modified couple stress theory increases the natural frequency under the various foundation for free vibration of composite laminated micro beams.

• Journal of Families and Better Life
• /
• v.33 no.5
• /
• pp.37-53
• /
• 2015

The purpose of this study is to examine the differences in perceived time pressure between employed and non-employed married women in Korea. The sample of married couple from the Korean Time Use Survey 2009 (n = 6,948 couple diaries) was used to examined the difference in the level of perceived time pressure over the life cycle of two group. This study also investigated the married women's time use, husband's time use as well as hour of domestic outsourcing and whether such factors are associated with lowering perceived time pressure of married women. Results showed employed wives felt almost 3 times more time pressed than non-employed wives, and the gap mostly remained over different life cycles. Total work hours were associated with increasing the time pressure of both groups of women, while regenerating time was associated with ameliorating time pressure. The result suggests that the time pressure gap between employed and non-employed wives can be partly due to the relative length of total labor hours and regenerating time among the two groups. Ordered logit analysis revealed that husband's paid work hours were not associated with wive's feeling rushed, but husband' unpaid work hours were positively linked with time pressure of their wives. Results indicated if employed or non-employed wives are feeling very busy, there is a high chance that husband might give them some help. We found employed wives spend more hours on housework outsourcing, and purchasing goods for housework was not associated with lowering the feeling of pressure of employed wives. There were both similarity and difference in factors associated with women's feeling pressed among employed and non-employed wives. It implies that social process and it's strategies to alleviate the time pressure can be different by women's employment status.

• Women's Health Nursing
• /
• v.19 no.3
• /
• pp.153-165
• /
• 2013

Purpose: The purpose of this study was to review the literature on intervention for breast cancer survivors and their partners. Methods: The literature search was performed using MEDLINE, Pubmed, and Proquest to summarize the current state of knowledge regarding intervention for breast cancer survivors and their partners. Articles published between January 2000 and December 2011 were included. Results: A total of 14 studies were identified. Couple-base d intervention was more effective than intervention for survivors alone. Intervention to partners had also effects on their wives. Most studies were conducted in USA with Caucasian women. Sample size of intervention studies was small with most being pilot studies. Conclusion: Providing couple-based intervention to breast cancer survivors could have positive impacts on physical, interpersonal, and social aspects in breast cancer survivors. Future studies with large sample and different ethnicity are needed to confirm the effects of couple-based interventions for breast cancer survivors.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.9 s.180
• /
• pp.2191-2201
• /
• 2000

End effects due to sectional deformations of thin-walled beams with closed cross section are analysed by a one-dimensional theory. In particular, end effects associated with warping (out of plane m otion) and distortion (in plane motion) are investigated. The exact solutions as a vector form are newly derived to reveal slowly-decaying nature of the end effects in a thin-walled beam loaded by a couple. Several examples of thin-walled beams under various loading conditions indicate that the local end effect zone due to warping and distortion is approximately ten times the typical beam width.

• Steel and Composite Structures
• /
• v.44 no.3
• /
• pp.371-388
• /
• 2022

The present study tackles the problem of forced vibration of imperfect axially functionally graded shell structure with truncated conical geometry. The linear and nonlinear large-deflection of the structure are considered in the mathematical formulation using von-Kármán models. Modified coupled stress method and principle of minimum virtual work are employed in the modeling to obtain the final governing equations. In addition, formulations of classical elasticity theory are also presented. Different functions, including the linear, convex, and exponential cross-section shapes, are considered in the grading material modeling along the thickness direction. The grading properties of the material are a direct result of the porosity change in the thickness direction. Vibration responses of the structure are calculated using the semi-analytical method of a couple of homotopy perturbation methods (HPM) and the generalized differential quadrature method (GDQM). Contradicting effects of small-scale, porosity, and volume fraction parameters on the nonlinear amplitude, frequency ratio, dynamic deflection, resonance frequency, and natural frequency are observed for shell structure under various boundary conditions.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.2
• /
• pp.342-350
• /
• 1993

Experiments are performed to determine the dependence of torsional rigidity upon the cross-sectional area for specimens of dense polyurethane foam. Testing equipment was designed and fabricated in the laboratory to satisfy the experimental characteristics. Results show the increase of torsional rigidity compared to the expected value based on the conventional elasticity. And this can be explained that the consideration of the internal motions of constitutive particles predicts the elastic behavior of the material better.

• Structural Engineering and Mechanics
• /
• v.48 no.2
• /
• pp.195-205
• /
• 2013

The buckling problem of linearly tapered micro-columns is investigated on the basis of modified strain gradient elasticity theory. Bernoulli-Euler beam theory is used to model the non-uniform micro column. Rayleigh-Ritz solution method is utilized to obtain the critical buckling loads of the tapered cantilever micro-columns for different taper ratios. Some comparative results for the cases of rectangular and circular cross-sections are presented in graphical and tabular form to show the differences between the results obtained by modified strain gradient elasticity theory and those achieved by modified couple stress and classical theories. From the results, it is observed that the differences between critical buckling loads achieved by classical and those predicted by non-classical theories are considerable for smaller values of the ratio of the micro-column thickness (or diameter) at its bottom end to the additional material length scale parameters and the differences also increase due to increasing of the taper ratio.

• Korean Journal of Computational Design and Engineering
• /
• v.7 no.2
• /
• pp.96-101
• /
• 2002

Rapid Prototyping (RP) technology has been advanced to fabricate initial prototypes from various materials. Stratasys′ Fused Deposition Modeling (FDM) is one of the typical RP processes that provide functional prototypes of ABS plastic. In order to predict the behavior of final ABS parts, it is critical to understand the material properties of the raw FDM process material, and the effect that FDM build parameters have on the FDM part. In this paper, we seek to characterize the properties of ABS parts fabricated by the FDM 1650. Using the Design of Experiment (DOE) approach, the process parameters of FDM, such as raster orientation, air gap, bead width, color, and model temperature were examined. Tensile strengths of crisscross specimens, 〔45°/-45°〕, cross specimens, 〔0°/90°〕, and directionally fabricated tensile specimens (〔0°〕 and 〔90°〕) were measured and compared with the injection molded FDM-ABS P400 material. For the FDM parts made with a -0.003"air gap, the typical tensile strength ranged between 50 percent and 83 percent of the strength of injection molded ABS P400. From the experiments, a couple of build rules for designing FDM parts were obtained.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.9
• /
• pp.28-36
• /
• 2002

As cross-coupling capacitance generated in transmission line has been an important issue in VLSI world, a couple of ATPG algorithms has been proposed. However they were studied only for a simple single-line effect problem, so it cost so much time for an unsatisfying test generation efficiency. In this paper, we studied a noise model for multiple affected lines and generated test patterns in a short time. This paper proposes a crosstalk model affected by multiple tranmission lines and implemented an ATPG algorithm for detection of crosstalk noise faults. We modeled the crosstalk noise by multiple transmission line and made a truth table for this. We implemented an ATPG algorithm based on PODEM and revealed the results.

• Korean Journal of Materials Research
• /
• v.9 no.7
• /
• pp.707-714
• /
• 1999

To save electrical energy as much as 40 % for fluorescent lighting, the reflectors coated with silver reflective thin films recently became popular with higher reflectivities and long life. The thin films fabricated by using sputtering techniques are produced mainly in U.S.A. On the other hand, some silver films deposited by using evaporation methods show low adhesion in general, although the reflectivity is no problem. We have studied various PVD methods to obtain thin films with high reflectivity and adhesion on a substrate of polyester, for a couple of years. Silver films manufactured byusing evaporation showed the reflectivity of 96.4 % and the adhesion of $12 kg/\textrm{cm}^2$. while samples manufactured by using sputtering depicted the adhesion as much as $20 Kg/\textrm{cm}^2$ that is almost double, although their reflectivity was not much different. X-ray diffraction spectra for the sputtered films demonstrated a preferential growth on (111) plane and the cross-sections of the specimens revealed a dense columnar structure to result in the enhanced adhesion.