• Structural Engineering and Mechanics
• /
• 제64권4호
• /
• pp.403-411
• /
• 2017

In this article, analytical solution for free vibration of micro composite laminated beam on elastic medium based on modified couple stress are presented. The surrounding elastic medium is modeled as the Winkler elastic foundation. The governing equations and boundary conditions are obtained by using the principle of minimum potential energy for EulerBernoulli beam. For investigating the effect of different parameters including material length scale, beam thickness, some numerical results on different cross ply laminated beams such as (90,0,90), (0,90,0), (90,90,90) and (0,0,0) are presented on elastic medium. Free vibration analysis of a simply supported beam is considered utilizing the Fourier series. Also, the fundamental frequency is obtained using the principle of Hamilton for four types of cross ply laminations with hinged-hinged boundary conditions and different beam theories. The fundamental frequency for different thin beam theories are investigated by increasing the slenderness ratio and various foundation coefficients. The results prove that the modified couple stress theory increases the natural frequency under the various foundation for free vibration of composite laminated micro beams.

• 가정과삶의질연구
• /
• 제33권5호
• /
• pp.37-53
• /
• 2015

The purpose of this study is to examine the differences in perceived time pressure between employed and non-employed married women in Korea. The sample of married couple from the Korean Time Use Survey 2009 (n = 6,948 couple diaries) was used to examined the difference in the level of perceived time pressure over the life cycle of two group. This study also investigated the married women's time use, husband's time use as well as hour of domestic outsourcing and whether such factors are associated with lowering perceived time pressure of married women. Results showed employed wives felt almost 3 times more time pressed than non-employed wives, and the gap mostly remained over different life cycles. Total work hours were associated with increasing the time pressure of both groups of women, while regenerating time was associated with ameliorating time pressure. The result suggests that the time pressure gap between employed and non-employed wives can be partly due to the relative length of total labor hours and regenerating time among the two groups. Ordered logit analysis revealed that husband's paid work hours were not associated with wive's feeling rushed, but husband' unpaid work hours were positively linked with time pressure of their wives. Results indicated if employed or non-employed wives are feeling very busy, there is a high chance that husband might give them some help. We found employed wives spend more hours on housework outsourcing, and purchasing goods for housework was not associated with lowering the feeling of pressure of employed wives. There were both similarity and difference in factors associated with women's feeling pressed among employed and non-employed wives. It implies that social process and it's strategies to alleviate the time pressure can be different by women's employment status.

• 여성건강간호학회지
• /
• 제19권3호
• /
• pp.153-165
• /
• 2013

Purpose: The purpose of this study was to review the literature on intervention for breast cancer survivors and their partners. Methods: The literature search was performed using MEDLINE, Pubmed, and Proquest to summarize the current state of knowledge regarding intervention for breast cancer survivors and their partners. Articles published between January 2000 and December 2011 were included. Results: A total of 14 studies were identified. Couple-base d intervention was more effective than intervention for survivors alone. Intervention to partners had also effects on their wives. Most studies were conducted in USA with Caucasian women. Sample size of intervention studies was small with most being pilot studies. Conclusion: Providing couple-based intervention to breast cancer survivors could have positive impacts on physical, interpersonal, and social aspects in breast cancer survivors. Future studies with large sample and different ethnicity are needed to confirm the effects of couple-based interventions for breast cancer survivors.

• 대한기계학회논문집A
• /
• 제24권9호
• /
• pp.2191-2201
• /
• 2000

End effects due to sectional deformations of thin-walled beams with closed cross section are analysed by a one-dimensional theory. In particular, end effects associated with warping (out of plane m otion) and distortion (in plane motion) are investigated. The exact solutions as a vector form are newly derived to reveal slowly-decaying nature of the end effects in a thin-walled beam loaded by a couple. Several examples of thin-walled beams under various loading conditions indicate that the local end effect zone due to warping and distortion is approximately ten times the typical beam width.

• Steel and Composite Structures
• /
• 제44권3호
• /
• pp.371-388
• /
• 2022

The present study tackles the problem of forced vibration of imperfect axially functionally graded shell structure with truncated conical geometry. The linear and nonlinear large-deflection of the structure are considered in the mathematical formulation using von-Kármán models. Modified coupled stress method and principle of minimum virtual work are employed in the modeling to obtain the final governing equations. In addition, formulations of classical elasticity theory are also presented. Different functions, including the linear, convex, and exponential cross-section shapes, are considered in the grading material modeling along the thickness direction. The grading properties of the material are a direct result of the porosity change in the thickness direction. Vibration responses of the structure are calculated using the semi-analytical method of a couple of homotopy perturbation methods (HPM) and the generalized differential quadrature method (GDQM). Contradicting effects of small-scale, porosity, and volume fraction parameters on the nonlinear amplitude, frequency ratio, dynamic deflection, resonance frequency, and natural frequency are observed for shell structure under various boundary conditions.

• 대한기계학회논문집
• /
• 제17권2호
• /
• pp.342-350
• /
• 1993

Experiments are performed to determine the dependence of torsional rigidity upon the cross-sectional area for specimens of dense polyurethane foam. Testing equipment was designed and fabricated in the laboratory to satisfy the experimental characteristics. Results show the increase of torsional rigidity compared to the expected value based on the conventional elasticity. And this can be explained that the consideration of the internal motions of constitutive particles predicts the elastic behavior of the material better.

• Structural Engineering and Mechanics
• /
• 제48권2호
• /
• pp.195-205
• /
• 2013

The buckling problem of linearly tapered micro-columns is investigated on the basis of modified strain gradient elasticity theory. Bernoulli-Euler beam theory is used to model the non-uniform micro column. Rayleigh-Ritz solution method is utilized to obtain the critical buckling loads of the tapered cantilever micro-columns for different taper ratios. Some comparative results for the cases of rectangular and circular cross-sections are presented in graphical and tabular form to show the differences between the results obtained by modified strain gradient elasticity theory and those achieved by modified couple stress and classical theories. From the results, it is observed that the differences between critical buckling loads achieved by classical and those predicted by non-classical theories are considerable for smaller values of the ratio of the micro-column thickness (or diameter) at its bottom end to the additional material length scale parameters and the differences also increase due to increasing of the taper ratio.

• 한국CDE학회논문집
• /
• 제7권2호
• /
• pp.96-101
• /
• 2002

Rapid Prototyping (RP) technology has been advanced to fabricate initial prototypes from various materials. Stratasys′ Fused Deposition Modeling (FDM) is one of the typical RP processes that provide functional prototypes of ABS plastic. In order to predict the behavior of final ABS parts, it is critical to understand the material properties of the raw FDM process material, and the effect that FDM build parameters have on the FDM part. In this paper, we seek to characterize the properties of ABS parts fabricated by the FDM 1650. Using the Design of Experiment (DOE) approach, the process parameters of FDM, such as raster orientation, air gap, bead width, color, and model temperature were examined. Tensile strengths of crisscross specimens, 〔45°/-45°〕, cross specimens, 〔0°/90°〕, and directionally fabricated tensile specimens (〔0°〕 and 〔90°〕) were measured and compared with the injection molded FDM-ABS P400 material. For the FDM parts made with a -0.003"air gap, the typical tensile strength ranged between 50 percent and 83 percent of the strength of injection molded ABS P400. From the experiments, a couple of build rules for designing FDM parts were obtained.

• 대한전자공학회논문지SD
• /
• 제39권9호
• /
• pp.28-36
• /
• 2002

VLSI 영역에서 전송선에 발생하는 상호교차 커패시턴스(cross-coupling capacitance)가 중요한 이슈가 됨에 따라 이로 인한 고장을 검출하는 몇 가지 ATPG 알고리즘이 제안되었다. 대부분 단일한 능동선로만을 대상으로 연구가 진행되었으며, 테스트 생성 효율에 비해 많은 시간비용을 감수해야 하는 결과를 내 놓을 수 밖에 없었다. 이에 대한 대안으로 본 논문에서는 다중 선로를 대상으로 하는 잡음 모델에 관해 연구하였다. 본 논문은 다수의 전송선에 영향을 받는 crosstalk 모델을 제시하고 이 모델에 따라 crosstalk 잡음 고장 검출을 목적으로 하는 ATPG 알고리즘을 제안한다. 이 논문에서는 crosstalk에 의한 잡음 고장을 정적 해저드로 조건을 설정하고, 각 게이트에 따라 이 조건을 만족하는 진리표를 만들 것이다. 그 후 PODEM에 기반한 ATPG 알고리즘을 구현한 후 그 결과를 보인다.

• 한국재료학회지
• /
• 제9권7호
• /
• pp.707-714
• /
• 1999

형광등으로 사용되는 전기 에너지의 40%를 절약할 수 있는 방법으로서 그 반사값을 특수 은 반사박막으로 처리하여 고효율 및 내구성을 갖는 기술이 최근에 알려지고 있다. 이 박막들은 sputtering법을 이용한 것으로 주로 미국에서 생산되어지고 있다. 한편. evaporation 법으로 제작된 은 박막들은 일반적으로 반사효율에는 별문제가 없으나 부착력이 떨어지는 단점이 있다. 우리는 수년간 polyester를 기판으로 하고 몇가지 PVB 방법을 동원하여 고 반사율 및 부착력을 갖는 은경 박막을 확보하기 위해 연구를 해왔다. 그 결과, evaporation 법으로 제작된 은 박막은 96.4%의 반사율을 보이나 부착력은 $12 Kg/\textrm{cm}^2$에 불과함을 확인하였고. sputter 법으로 제작한 시편들의 반사율은 96.3 %로 비슷하였으나 부착력이 /$20 Kg\textrm{cm}^2$로 거의 두배로 뛰어올라 sputter법의 공정조건이 그 결과박막들의 물리적 특성에 미치는 긍정적 영향을 확인할 수 있었다. X-선 회절 분석결과 sputter의 경우에 (111)면이 우선성장함을 알 수 있었고, 시편의 단면으로부터 관찰된 치밀한 columnar 구조가 부착력을 향상시키고 있음이 확인되었다.