• CELLMED
• /
• v.10 no.4
• /
• pp.31.1-31.6
• /
• 2020

Introduction: Dyslipidaemia is directly associated with cardiovascular diseases. Temperament, the unique constitutional make-up of an individual, is responsible for one's personality traits, physical appearances, and disease predispositions. The rising prevalence of dyslipidaemia becomes a challenge to control morbidity and mortality due to cardiovascular diseases. Objective: To study clinical patterns and risk factors of dyslipidaemia and its association with temperament at the individual level was the main objective of this study. Materials and Methods: It was a descriptive and analytical cross sectional study. The participants (n=88) were screened on the basis of raised serum lipid profile from the outpatient department of National Research Institute of Unani Medicine for Skin Disorders, Hyderabad. The data were collected on a case record form designed for this study and analyzed retrospectively. Results: In this study, there were 57% participants (n=50) of phlegmatic temperament in which mean total cholesterol, triglycerides, low density lipoprotein- cholesterol and high density lipoprotein-cholesterol were 230.92 (±49.48) mg/dl, 182.34 (±110.61) mg/dl, 153.24 (±50.21) mg/dl and 46.3 (±10.83) mg/dl respectively. Discussion: This study showed the prevalence of different clinical patterns of dyslipidaemia in the population and the phlegmatic participants were dyslipidaemic in a higher percentage. The prevalence of dyslipidaemia in phlegmatic participants may be linked to the constitutional make-up of the individual. The temperament of an individual may be considered as one of the risk factors for dyslipidaemia. Conclusion: It was concluded that the temperament of an individual may be used as a screening tool to predict the individual's tendency to develop dyslipidaemia.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2004.04a
• /
• pp.487-494
• /
• 2004

Resizing techniques have been recognized as practical methods for drift design of high-rise building since sensitivity analysis and iterative structural analysis are not required in implementation. In the techniques, the amount of material of a memberin a building for resizing is determined in terms of cross-sectional areas and sectional inertia moments as design variables. In this study, five drift design methods are developed by considering design variable linking strategy and fomulating resizing algorithm in terms of material properties of shear walls as a design variable. The developed methods are applied to the drift design of 20-story frame-RC shear wall structure, and then evaluated in the view points of practicality and efficiency.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.17 no.3
• /
• pp.319-332
• /
• 2004

Due to their high strength to weight ratios and excellent durability, fiber reinforced polymer(FRP) is widely used in construction industries. In this paper, a shape optimum design of FRP bridge decks haying pultruded cellular cross-section is presented. In the problem formulation, an objective function is selected to minimize the volumes. The cross-sectional dimensions and material properties of the deck of FRP bridges are used as the design variables. On the other hand, deflection limits in the design code, material failure criteria, buckling load, minimum height, and stress are selected as the design constraints to enhance the structural performance of FRP decks. In order to efficiently treat the optimization process, the cross-sectional shape of bridge decks is assumed to be a tube shape. The optimization process utilizes an improved Genetic Algorithms incorporating indexing technique. For the structural analysis using a three-dimensional finite element, a commercial package(ABAQUS) is used. Using a computer program coded for this study, an example problem is solved and the results are presented with sensitivity analysis. The bridge consists of a deck width of 12.14m and is supported by five 40m long steel girders spaced at 2.5m. The bridge is designed to carry a standard DB-24 truck loading according to the Standard Specifications for Highway Bridges in Korea. Based on the optimum design, viable cross-sectional dimensions for FRP decks, suitable for pultrusion process are proposed.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.24 no.3
• /
• pp.149-158
• /
• 2012

This study analyzed cross-sectional variations in residual current and strengths of stratification by observing cross-sectional velocity and salinity during spring tide and neap tide, respectively, for continuous 13-hour periods at 2 observation lines at northern and southern end of Seokmo Channel, which is located west of Ganghwado. Salinity distribution of channel depends on not only neap and spring tide but also impact of salinity. The residual current component was obtained by removing $M_2$ and $M_4$ tidal components that were extracted using the least squares method on 13-hour velocity component. Cross-section of residual velocity at northern and southern end of Seokmo Channel exhibited southward residual components at channel's surface layer, but northward residual current was observed at channel's bottom layer, clearly showing a 2-layer tidal circulation between surface and bottom layers. The variation in location of appearing northward residual current according to changes in spring and neap tidal cycle and its correlation with stratification were analyzed using the Richardson number and Simpsonhunter index. At northern and southern end of Seokmo Channel, northward residual current appears in the location where Richardson number is large, Simpson-hunter index appears as a value greater than 4.

• Restorative Dentistry and Endodontics
• /
• v.30 no.2
• /
• pp.95-101
• /
• 2005

The aim of this study was to evaluate the microleakage of teeth according to root canal preparation with & without apical enlargement in various size of apical foramen. 60 extracted one canal roots were cross-cutted at 5 mm from root apex and divided into two groups according to their apical foramen size of large (L) and small (S). Each group was subdivided into two groups accordance with their cross-sectional configuration at 5 mm from apex, round (R) and ovoid (O); SR Group, SO Group LR Group, LO Group. Each group was shaped in .02 taper by Quantec series Nickel-Titanium (NiTi) rotary file, obturated by lateral condensation method. Leakage was measured using a fluid transport model under 40 $cmH_2O$ pressure. After the leakage test, blocks which had showed the leakage retreated with .04 taper and ,06 taper and evaluated the degree of fluid filtration in each group. The data was analysed statistically using chi-square test and fisher's exact test. The results obtained were as follows : 1. Significant difference in leakage was found in groups which had different apical foramen size in .02 taper instrumentation (p < 0.05), but not in .04 taper instrumentation (p > 0.05) 2. The difference in microleakage according to the shape of canal was not evident at 5 mm from apex (p > 0.05). 3. There was correlation between .02 taper instrumentation and .04 taper instrumentation in LR group, LO group (p < 0.05).

• Composites Research
• /
• v.36 no.1
• /
• pp.48-52
• /
• 2023

Fiber-reinforced composites have anisotropic material properties, so the mechanical properties of composite structures can vary depending on the stacking sequence. Therefore, it is essential to design the proper stacking sequence of composite structures according to the functional requirements. However, depending on the manufacturing condition or the shape of the structure, there are many cases where the designed stacking angle is out of range, which can affect structural performance. Accordingly, it is important to analyze the stacking angle in order to confirm that the composite structure is correctly fabricated as designed. In this study, the stacking angle was predicted from real cross-sectional images of fiber-reinforced composites using convolutional neural network (CNN)-based deep learning. Carbon fiber-reinforced composite specimens with several stacking angles were fabricated and their cross-sections were photographed on a micro-scale using an optical microscope. The training was performed for a CNN-based deep learning model using the cross-sectional image data of the composite specimens. As a result, the stacking angle can be predicted from the actual cross-sectional image of the fiber-reinforced composite with high accuracy.

• Parasites, Hosts and Diseases
• /
• v.61 no.3
• /
• pp.298-303
• /
• 2023

This study aimed to describe a rare case of gnathostomiasis in the vocal cord. A 54-yearold Chinese woman living in Korea visited with a chief complaint of voice change at the outpatient department of otorhinolaryngology in Hallym Sacred Heart Hospital, Hallym University on August 2, 2021. She had eaten raw conger a few weeks before the voice change developed, but her medical history and physical examinations demonstrated neither gastrointestinal symptoms nor other health problems. A round and red cystic lesion, recognized in the anterior part of the right vocal cord, was removed using forceps and scissors through laryngeal microsurgery. The histopathological specimen of the cyst revealed 3 cross-sections of a nematode larva in the lumen of the cyst wall composed of inflammatory cells and fibrotic tissues. They differ in diameter, from 190 ㎛ to 235 ㎛. They showed characteristic cuticular layers with tegumental spines, somatic muscle layers, and gastrointestinal tracts such as the esophagus and intestine. Notably, intestinal sections consisted of 27-28 lining cells containing 0-4 nuclei per cell. We tentatively identified the nematode larva recovered from the vocal cord cystic lesion as the thirdstage larva of Gnathostoma, probably G. nipponicum or G. hispidum, based on the sectional morphologies.

• The Journal of the Korea Contents Association
• /
• v.11 no.6
• /
• pp.270-278
• /
• 2011

The purpose of this study was to compare acute and chronic LBP patient in twenties and forties, respectively by size measure paraspinal muscle (cross-sectional area; CSA). CSA of paraspinal muscle (psoas, multifidus, erector muscle) size was measured by free-handling technique of the picture archiving and communication system(PACS) using MRI at the level(lower end-plate of L4) in twenties(9 males, 10 females) and forties(9 males, 8 females) in acute and chronic LBP patient. The results of this study showed no significantly difference between acute and chronic LBP (p>0.05) in twenties patients. However, there was significant difference between acute and chronic LBP (p<0.05) in forties patients. Also, there was significant difference in paraspinal muscle CSA between chronic LBP patients in twenties and chronic LBP patients in forties (p<0.05). This study showed that paraspinal muscle atrophy was observed in forties with various cause, but Not chronic LBP patients in twenties. Accordingly it is required for chronic LBP patients in forties to minimize trunk muscle atrophy through immediate back muscle dynamic exercise and early functional activity.

• Journal of Acupuncture Research
• /
• v.34 no.4
• /
• pp.172-179
• /
• 2017

Background: This study was designed to evaluate the clinical effectiveness of traditional Korean medicine treatment for lumbar spinal stenosis as assessed by radiological criteria. Methods: This was an observational study of 122 patients who were diagnosed with lumbar spinal stenosis and admitted to Jaseng Hospital between January 2016 and June 2017. They were analyzed according to sex, age, cause of disease, disease stage, length of admission, type of stenosis, morphological grade, and dural sac cross-sectional area. All patients were treated with traditional Korean medicine. Patients were assessed with the Numeric Rating Scale (NRS), Oswestry Disability Index (ODI) and EQ-5D before and after treatment. Results: Regarding the distribution of the factors analyzed, these were of note: more females than males (1:3.52); and highest proportions were age more than 70 years (37.70%), cause of lumbar spinal stenosis unknown (67.21%), and subacute stage (42.62%). Comparing before and after treatment, the NRS score for low back and pelvic pain decreased from $6.14{\pm}1.71$ to $4.28{\pm}1.91$ (p < 0.001), and the NRS score for radiating pain and numbness decreased from $6.27{\pm}1.61$ to $2.02{\pm}1.54$ (p < 0.001). ODI decreased from $46.86{\pm}19.40$ to $33.63{\pm}18.66$ (p < 0.001), and gait-related ODI decreased from $3.34{\pm}1.23$ to $2.80{\pm}1.11$ (p < 0.001). There were no statistically significant differences in improvement of the NRS, ODI, gait-related ODI, and EQ-5D for morphological grade and dural sac cross-sectional area. Conclusion: Traditional Korean medicine is effective treatment for patients with lumbar spinal stenosis. Even in patients with severe radiological findings, it is possible to reduce pain and improve quality of life.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.29 no.5
• /
• pp.447-454
• /
• 2016

In the meantime, looking at the present status of how to estimationte the quantity of rebar based on 3D BIM getting the limelight in these days, commercial BIM tools provide rebar modeling functions however it takes a vast amount of modeling time for modeling of rebar in use of that function hence there is no BIM software at present for practical use. Therefore, in this study, we organized and presented a practical rebar quantity estimationtion process in BIM-based design work-site and intended to develop a program named Rebar Automatic Arrangement Program - hereinafter called RAAP - which enables automatic rebar arrangement based on much more precise cross-sectional information of bars in column, beam, slab and wall than the one from existing 2D method under the conditions without any cross-sectional information in the initial design phase. In addition, we intended to establish rebar quantity estimationtion process in the initial design phase through interworking of modeling & quantity estimationtion functions in consideration of joint, anchoring length of BuilderHUB as a BIM software with RAAP. The results from this study are practical in developing a technology that is able to estimationte quantity with more improved reliability than the one from existing 2D-based methods with less effort when the quantity of framework is estimationted in the uncompleted state of cross-sectional design for structural members in the initial design phase of a construction project. And it is expected that it could be utilized as a basic study from which a reasonable quantity estimationtion program can be established in the initial design phase.