• Journal of Technologic Dentistry
• /
• v.33 no.1
• /
• pp.55-61
• /
• 2011

Purpose: In this study, FEM(Finite Element Method) and bending strength test was conducted using normal implant and porous implant for the mechanical estimation of porous dental implant made by SLM method. Methods: Mechanical characteristics of PI(porous implant) and NI(normal implant) applied distributed loads(200N, 500N) were observed through FEM analysis. And each bending strength was gotten through bending test using MTS(Mechanical Test System, Instron 8871). Results: The result of FEM analysis was observed that stress difference between upper and surface of PI was 12 times, while NI was 2 times. The result of bending test was observed that bending strength of PI was lower than NI. we made a decision about this result that cross-sectional area of NI was larger than the PI. Conclusion: The stress shielding ability of porous implant was better than normal implant through result of FEM analysis. And bending strength of porous implant was lower than NI. We think that cause of this result was difference of cross-sectional area.

• Journal of Korean Academy of Nursing
• /
• v.40 no.4
• /
• pp.580-588
• /
• 2010

Purpose: The purpose of this study was to examine effects of decreased locomotor activity on mass, Type I and II fiber cross-sectional areas of ipsilateral and contralateral hindlimb muscles 21 days after establishing the Parkinson's disease rat model. Methods: The rat model was established by direct injection of 6-hydroxydopamine (6-OHDA, 50 ${mu}g$) into the left substantia nigra after stereotaxic surgery. Adult male Sprague-Dawley rats were assigned to one of two groups; the Parkinson's disease group (PD; n=17) and a sham group (S; n=8). Locomotor activity was assessed before and 21 days after the experiment. At 22 days after establishing the rat model, all rats were anesthetized and soleus and plantaris muscles were dissected from both ipsilateral and contralateral sides. The brain was dissected to identify dopaminergic neuronal death of substantia nigra in the PD group. Results: The PD group at 21 days after establishing the Parkinson's disease rat model showed significant decrease in locomotor activity compared with the S group. Weights and Type I and II fiber cross-sectional areas of the contralateral soleus muscle of the PD group were significantly lower than those of the S group. Conclusion: Contralateral soleus muscle atrophy occurs 21 days after establishing the Parkinson's disease rat model.

• Journal of Korean Academy of Nursing
• /
• v.34 no.1
• /
• pp.150-159
• /
• 2004

Purpose: The purpose of this study was to determine the effect of DHEA on hindlimb muscles(soleus, plantaris and gastrocnemius) in a focal brain ischemia model rat. Method: Twenty-seven male Sprague-Dawley rats were randomly divided into three groups: CINS(cerebral ischemia + normal saline), CIDH(cerebral ischemia + DHEA), or SHNS(sham + normal saline). Both the CINS and CIDH groups underwent a transient right middle cerebral artery occlusion operation. In the SHNS group, a sham operation was done. 0.34mmol/kg DHEA was administered daily by an intraperitoneal injection for 7days. Results: The muscle weight, muscle fiber cross-sectional area of the Type I muscle fiber of soleus and Type II muscle fiber of plantaris and gastrocnemius, myofibrillar protein content of gastrocnemius, and muscle strength in the CINS group decreased compared with the SHNS group. The muscle weight, muscle fiber cross-sectional area of the Type II muscle fiber of plantaris and gastrocnemius, myofibrillar protein content of soleus, and muscle strength in the CIDH group increased compared with the CINS group. Conclusion: It was identified that muscle atrophy could be induced during 7 days after a cerebral infarction, and DHEA administration during the early stages of a cerebral infarction might attenuate muscle atrophy.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.7
• /
• pp.1047-1054
• /
• 2001

Atomic Force Microscope (AFM) was used to study cross sectional profiles and dimensions of fatigue striations in 2017-T351 aluminum alloy. Their widths(SW) and heights (SH, SH(sub)h, SH(sub)ι) were measured from the cross sectional profiles of three-dimension AFM images. The following results that will be helpful to understand the fatigue crack growth mechanism were obtained. (1) The relation of SH=$\alpha$(SW)(sup)1.2 was obtained. (2) The ratio of the striation height to its width SH/SW, SH(sub)h/SW and SH(sub)ι/SW did not depend on the stress intensity factor range ΔK and the stress ratio R( =P(sub)min/P(sub)max = K(sub)min/K(sub)max). (3) Effect of precipitate on the morphology of striation was changed by the relative dimensional difference between the striation width SW and the precipitates. From these results, the applicability of the AFM to nano-fractography is discussed.

• Steel and Composite Structures
• /
• v.8 no.5
• /
• pp.343-359
• /
• 2008

In the present study, an efficient method for the optimum design of three-dimensional (3D) steel framed structures is proposed. In this method, in addition to choosing the best position of columns based on architectural requirements, the optimum cross-sectional dimensions of elements are determined. The preliminary design variables are considered as the number of columns in structural plan, which are determined by a direct optimization method suitable for discrete variables, without requiring the evaluation of derivatives. After forming the geometry of structure, the main variables of the cross-sectional dimensions are evaluated, which satisfy the design constraints and also achieve the least-weight of the structure. To reduce the number of finite element analyses and the overall computational time, a new third order approximate function is introduced which employs only the diagonal elements of the higher order derivatives matrices. This function produces a high quality approximation and also, a robust optimization process. The main feature of the proposed techniques that the higher order derivatives are established by the first order exact derivatives. Several examples are solved and efficiency of the new approximation method and also, the proposed method for the best position of columns in 3D steel framed structures is discussed.

• Geomechanics and Engineering
• /
• v.14 no.2
• /
• pp.175-185
• /
• 2018

Sand Compaction Piles (SCPs) are constructed by feeding and compacting sand into soft clay ground. Sand piles have been installed with irregular cross-sectional shapes, and mixtures of both sand and clay, which violate the design requirement of circular shape according to the replacement area ratio due to various factors, including side flow pressure. Therefore, design assumptions cannot be satisfied according to the conditions of the ground and construction and the replacement area ratio. Two case histories were collected, examined, and interpreted in order to study the effect of the shape of SCPs. The effects of the distortion of SCP shape and the mixture of sand and clay were studied with the results of large direct shear tests. The design internal friction angle was secured with the irregular cross-sectional sand piles regardless of the replacement area ratio. The design internal friction angle was secured regardless of mixed condition when the mixture of sand and clay was higher than the replacement area ratio of 65%. Therefore, systematic construction management is recommended with a replacement area ratio below 65%.

• Journal of Korean Public Health Nursing
• /
• v.37 no.1
• /
• pp.136-146
• /
• 2023

This cross-sectional design study was undertaken to determine the factors associated with suicidal ideation in human immunodeficiency virus (HIV)-infected older adults. Data from a city-wide representative sample collected by the Seoul Metropolitan Government were used. The cross-sectional survey was conducted between February and March 2013. Participants selected and included in the analysis were HIV-infected adults living in Seoul, and aged 50 years and older. The overall adjusted model showed that being unemployed (adjusted odds ratio [aOR], 3.34; 95% confidence interval [CI], 1.16-9.57), a history of depression treatment (aOR, 4.61; 95% CI, 1.02-20.66), perceived belongingness (aOR, 0.63; 95% CI, 0.41-0.99), and psychological functioning (aOR, 0.85; 95% CI, 0.73-0.99) were significantly related to suicidal ideation. Psychosocial features were found to be strongly associated with suicidal ideation among HIV-infected older adults. The findings could be useful for HIV nursing consultants to identify HIV-infected older adults who are vulnerable to suicidal ideation. Comprehensive mental health services should be provided as coping resources for HIV-infected older adults who have suicidal ideation.

• Clinical Endoscopy
• /
• v.56 no.4
• /
• pp.460-469
• /
• 2023

Background/Aims: Diagnosis of Helicobacter pylori-naive gastric cancer (HPNGC) is becoming increasingly important. This study aimed to explore the quality indicators for HPNGC detection. Methods: We conducted a cross-sectional, nationwide, web-based survey of gastrointestinal endoscopists in Japan. In addition to questions about the number of HPNGC cases detected in a year and basic information, the questionnaire also consisted of 28 questions: (1) 18 about HPNGC awareness, (2) six about diagnostic proactiveness, and (3) four about interest in HPNGC. Results: Valid responses were obtained from 712 endoscopists. The Japan Gastroenterological Endoscopy Society-certified endoscopists had a significantly higher HPNGC detection rate than the nonspecialists (0.42% vs. 0.32%, respectively; p=0.008). The results of the multiple regression analysis showed that Japan Gastroenterological Endoscopy Society certification and high awareness and interest scores were independent predictors of the HPNGC detection rate (p=0.012, p<0.001, p=0.024, respectively). Principal component analysis showed that the endoscopists who attended conferences for collecting information on HPNGC had a higher level of awareness. Conclusions: To improve the detection of HPNGC, it is necessary to increase the awareness of the disease. It is hoped that relevant societies will play an important role in endoscopists' education.

• Journal of Korean Association for Spatial Structures
• /
• v.17 no.1
• /
• pp.41-47
• /
• 2017

Structures of steel frame buildings getting vary depending on the development of construction technology. Fire-resistant steel beams and Columns accredited by accreditation bodies from the performance of various fire-resistant coating is applied to the current pillar method is most H-beams. H-beam has been proposed a non-load test specifications in the relevant regulations, its scope of accreditation to be granted without limitation of size H-beams from the performance of the test specification. However, in the case of the rectangular steel structure is to check its performance and to a separate one of the receive acknowledge and so take advantage of the cross-sectional shape factor in this study to test the performance of the fire-resistant structure proposed for standard test specimen.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1544-1545
• /
• 2011

For quantitative understanding of gas discharge phenomena, we should know electron collision cross section. Processing plasma etching of semiconductor, and research are being used in the etching source $C_4F_6$ gas may be used by itself and mixed with other gases are also used. However, the molecular gas $C_4F_6$ study on the characteristics of the electron transport and the cross-sectional area of the decision is still lacking. Therefore, we understand the electron transport characteristics and analysed the electron transport coefficients. And to understand and interpret physical properties of the ionization coefficient ${\alpha}$/N, and the attachment coefficient ${\eta}$/N in $C_4F_6$ gas.