• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.6A
• /
• pp.581-590
• /
• 2010

This study introduces a layered sectional analysis for a PSC girder with a vaiable cross section and curved tendons. To consider the shear equilibrium at a concrete layer with curved tendons, the shear stress distribution has been computed at each section. In addition, to improve the convergence to the solution, a system identification technique is newly adopted in the solution process for strain computation. To examine the feasibility of the proposed approach, a static load test has been conducted for a full scale PSC girder with variable cross section. The prediction shows a good agreement with experiment. It is seen that a uniform cross section has the same moment capacity with a variable cross section while the variable cross section has more shear capacity than the uniform cross section. It is also noted that the maximum displacement of a variable cross section is a little smaller than a uniform cross section.

• Journal of Korean Academy of Nursing
• /
• v.25 no.2
• /
• pp.193-209
• /
• 1995

The purpose of this study was to determine the effect of intermittent low - intensity, short duration exercise during hindlimb suspension on the mass, relative weight, myofibrillar protein content, cross-sectional area of Type I and Type II fibers and SDH activity in Type II(plantaris) muscle. To examine the effectiveness of intermittent low-intensity, short duration exercise on mass, myofibrillar protein content and fiber size, the hindlimbs of adult female Wistar rats were suspended(HS) and half of these rats walked on a treadmill for 45 min/day(9 min every 2h) at 5m /min and a 15$^{\circ}$grade (HS-EX). Plantaris wet weight was 19.67% significantly smaller(p<0.005) and relative plantaris weight was 6.25% smaller compared with those of control rats following seven days of hindlimb suspension. Plantaris wet weight and relative plantaris weight increased by 27.66%, 12.22% each through intermit-tent exercise during hindlimb suspension(p<0.005, p<0.05), moreover, plantaris wet weight and relative plantaris weight of the HS-EX rats were similar to those of control rats. Soleus wet weight and relative soleus weight decreased significantly by 31% and 22.0% in the HS rats(p<0.05). Soleus wet weight and relative soleus weight increased by 10.41%, 25.64% respectively through intermittent ex-ercise during hindlimb suspension, furthermore, soleus wet weight and relative weight of the HS-EX rats were closer to those of control rats. Myofibrillar protein content of plantaris and soleus decreased significantly by 51.49%, 59.65% each, following seven days of hindlimb suspension (p<0.005) Myofibrillar protein content of plantaris and soleus increased by 51.79%, 75.47% each with significance through intermittent exercise during hindlimb suspension(p<0.005). Myofibrillar protein content of plantaris and soleus in HS-EX rats was smaller than that of control rats. No change was observed in fiber type percentage following 1 week of hindlimb suspension or exercise during hindlimb suspension. The type I fiber cross-sectional area of both soleus and plantaris muscle was 18.72% and 41.07% lower in the HS than that of the controls (p<0.05, p<.001), that of both muscles was 6.60% and 29. 3％ greater in the HS-EX than that of the HS rats. HS plus intermittent low- intensity short duration exercise resulted in Type I fiber cross-sectional area closer to the controls. Type II fiber cross-sectional area of both plantaris and soleus muscle was 22.45% and 22.58% sl nailer in the HS than in the controls, that of both muschles in the HS-EX was 14.10%, 5.78% greater than HS. Intermittent exercise during hindlimb suspension resulted in Type I, II fiber cross-sectional area closer to the control value. There was no change in SDH activity following 1week of hindlimb suspension or exercise during hindlimb suspension in the plantaris muscle. The results suggest that intermittent low intensity short duration exercise can ameliorate Type II muscular atrophy Induced by hindlimb suspension.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.4
• /
• pp.34-40
• /
• 2004

In this paper, we have studied the OCT(Optical Coherence Tomography) system which has been advantages of high resolution, 2-D cross-sectional images, low cost and small size configuration. The characteristics of light source determine the resolution and coherence length. The light source has a commercial SLD with a central wavelength of 1,285 ill11, 35.3 nm(FWHM). The optical delay line is necessary to make equal with the optical path length to scattered light or reflected light from a sample. In order to make equal the optical path length, the stage that is attached to a reference mirror is controled by a step motor. And the interferometer is configured with the Michelson interferometer by using a single mode fiber, and the scanner can be focused on the sample by using a reference ann Also, the 2-dimension cross-sectional images were measured with scanning the transverse direction of the sample by using a step motor. After detecting the internal signal of lateral direction, a scanner is moved to obtain the cross-sectional image of 2-dimension by using step motor. A photodiode, which has high detection sensitivity and excellent noise characteristics has been used. The detected small signal has a noise and interference. After filtering and amplifying the signal, the output signal is demodulated the waveform And then, a cross-sectional image is seen through converting this signal into a digitalized signal by using an AID converter. The resolution of the sample is about 30${\mu}{\textrm}{m}$, which corresponds to the theoretical resolution. Also, the cross-sectional images of onion cells were measured in real time scheme.

• Restorative Dentistry and Endodontics
• /
• v.31 no.2
• /
• pp.96-102
• /
• 2006

There are various factors affecting the fracture of NiTi rotary files. This study was performed to evaluate the effect of cross sectional area, pecking motion and pecking distance on the cyclic fatigue fracture of different NiTi files. Five different NiTi $files-Profile^{(R)}$ (Maillefer, Ballaigue, Switzerland), $ProTaper^{TM}$(Maillefer, Ballaigue, Switzerland), $K3^{(R)}$ (SybronEndo. Orange, CA) , Hero $642^{(R)}$ (Micro-mega, Besancon, France), Hero $Shaper^{(R)}$ (Micro-mega, Besancon, France)-were used. Each file was embedded in temporary resin, sectioned horizontally and observed with scanning electron microscope. The ratio of cross-sectional area to the circumscribed circle was calculated. Special device was fabricated to simulate the cyclic fatigue fracture of NiTi file in the curved canal,. On this device, NiTi files were rotated (300rpm) with different pecking distances (3 mm or 6 mm) and with different motions (static motion or dynamic pecking motion) . Time until fracture occurs was measured. The results demonstrated that cross-sectional area didn't have any effect on the time of file fracture. Among the files, $Profile^{(R)}$ took the longest time to be fractured. Between the pecking motions, dynamic motion took the longer time to be fractured than static motion. There was no significant difference between the pecking distances with dynamic motion, however with static motion, the longer time was taken at 3mm distance. In this study, we could suggest that dynamic pecking motion would lengthen the time for NiTi file to be fractured from cyclic fatigue.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.12
• /
• pp.8-13
• /
• 2020

Seamless pipes are fabricated by drilling a hole in a cylindrical material and drawing the material to the desired diameter. These pipes are used in environments where high reliability is required. In this study, the pipe drawing process was simulated using DEFORM, a commercial finite element method (FEM) analysis program. The outer diameter of the steel cylinder used herein before drawing was 70 mm, and the target outer diameter was 58 mm. The drawing process consisted of two stages. In this study, the effect of cross-sectional reduction rate on the pipe was investigated by varying the cross-sectional reduction rate in each step to achieve the target outer diameter. The results of this study showed that the first section reduction rate of 26% and the second section reduction rate of 13.9% caused the lowest damage to the material. Moreover, the FEM simulation results confirmed the influence of the drawing die angle on the pipe drawing process. The drawing die angles of 15° in the first step and 9° in the second step caused the least damage to the material.

• The Research Journal of the Costume Culture
• /
• v.30 no.5
• /
• pp.675-688
• /
• 2022

The purpose of this study is to analyze the body type characteristics of tall adult men aged 20 to 69 years to present base material on body dimensions for men's clothing companies. The research method comprised statistical analysis of 3D measurements after selecting items from the 8th Korean human body size survey related to the torso body types of 495 adult men who were at least 178cm tall. As a result, six factors were extracted, and the total explanatory variable of the entire factor was shown to be 80.499%. As a result of cluster analysis using this as an independent variable, three types were derived: Type 1, "a normal body type with an oval cross-sectional shape" (37.6%), with a larger vertical size and an oval chest cross-sectional shape compared to other types; Type 2: a "cylindrical thick body shape" (31.1%), which is the first stage of BMI obesity, with narrow shoulders and a cylindrical shape with a round cross-section; Type 3, "a body shape with broad shoulders and developed chest parts" (31.3%), with a horizontal size similar to Type 2 above the waist, but similar to Type 1 below. The results of this study are expected to be used as a basis for a clothing dimension system and clothing development for tall men reflecting the characteristics of the torso.

• Journal of the Korean Society for Railway
• /
• v.14 no.3
• /
• pp.285-294
• /
• 2011

An analysis of railroad industry has been insufficient whereas there are lots of analysis of accumulation of technology, economic performances and ripple effects for macroscopic view and other industry of R&D investments. This study decided intellectual rights, patent, and paper as common indicators of scientific and technological performances for setting up performance targets through surveying and analysis of preceding study and verified a appropriateness of scientific and technological performances for railroad R&D 11 projects which were successfully finished. Preceding study has been set up performance targets by research investments as input, but this study made a performance target by model through a cross-sectional and residual analysis of performances of railroad R&D 11 Projects in applying research investments, capital investments and inner labor cost per man and research time as inputs, and verified a validity and a empirical analysis through analysis of other project.

• Journal of Veterinary Clinics
• /
• v.31 no.1
• /
• pp.31-35
• /
• 2014

As with humans, overweight or obesity is a major health concern in the companion animal population. A cross-sectional questionnaire-based survey of dog owners attending primary small animal veterinary practices from different areas in Chuncheon, Kangwon province, Korea was undertaken to explore the relationships between socioeconomic and other relevant risk factors associated with canine obesity. In addition, the author was to estimate the prevalence of obesity compared to published literatures for dogs. Owners were asked about dog age, neuter status, feeding habits, dog exercise, household income and owner age. The body condition score (BCS) of the dogs was also assessed. Multivariable binary logistic regression was used to assess the association between BCS and potential risk factors controlling for confounding variables, using odds ratios (OR), 95% confidence intervals (CIs). A total of 275 dogs (136 males and 139 females) aged 1-12 years (mean age $5.6{\pm}3.7$ years) were surveyed in 2013. Of these, 46.9% of dogs (n = 129) were classed as an ideal body shape (BCS = 3), 30.9% (n = 85) were overweight (BCS = 4), 8.4% (n = 23) were obese (BCS = 5) and 13.8% (n = 38) were underweight (BCS = 1 or 2). Neutered males and spayed females had the highest prevalence of obesity (43.4% and 33.9%); intact females had the lowest prevalence of obesity (31.6%). In univariable model, risk factors associated with canine obesity are multifactorial and include owner income, owner age, age of dog, neuter status, frequency of feeding per day, frequency of snacks and consultation with veterinarian on dog's weight. In final multivariable logistic regression model, dogs whose owners reported no consultation with veterinarians for weight management were significantly more likely to be obesity than ideal (OR = 7.6, 95% CI, 4.2-13.8; p < 0.0001). This study showed a high prevalence of obesity in domestic companion dogs. Since this was a cross-sectional study with small samples, the association of canine obesity with risk factors warrants more research. To the author's best knowledge, this is the first Korean study on dog body condition and obesity.

• Korean Journal of Community Nutrition
• /
• v.28 no.4
• /
• pp.282-292
• /
• 2023

Objectives: Bone health in early adulthood, as individuals approach peak bone mass, plays a critical role in preventing osteoporosis later in life. This study aimed to investigate the associations between lifestyle and dietary factors, anthropometric measurements, and urinary bone resorption markers in young adults. Methods: A cross-sectional study was conducted with 100 healthy Korean adults (50 men and 50 women) in their 20s and early 30s. Bone mineral density (BMD), anthropometric measurements, dietary intake (24-hour recall), and urinary bone resorption indicators (deoxypyridinoline and N-terminal telopeptide of type I collagen) were analyzed. Variables were compared between the osteopenia and osteoporosis groups (OSTEO group: 30% men and 60% women) and the healthy control group. Results: Men in the OSTEO group were significantly taller than those in the control group (P < 0.05). Women in the OSTEO group had significantly lower body weight and body composition (muscle and body fat) than those in the normal group (P < 0.01). Men in the OSTEO group had a significantly higher intake of animal calcium (Ca) than those in the normal group (P < 0.05). Women in the OSTEO group had significantly higher dietary fiber, vitamin A, Ca, plant Ca, and potassium intake than did those in the normal group (P < 0.05). There were no significant differences in caffeinated beverage consumption, eating habits, or urinary bone resorption indicators between the OSTEO and control groups of either sex. Conclusions: In our study of young South Korean adults, we observed low bone density levels, with particularly low BMD in taller men and underweight women. We found a higher nutrient intake in the OSTEO group, indicating the possibility of reverse causality, a phenomenon often found in cross-sectional studies. Therefore, there is a need to further elucidate dietary factors related to osteoporosis in young adults through prospective cohort studies involving a larger population.

• Journal of Preventive Medicine and Public Health
• /
• v.57 no.3
• /
• pp.242-251
• /
• 2024

Objectives: The aim of this study was to analyze the relationship between objective social isolation (SI) and unmet medical needs (UMN) in adults aged 19 and older. Methods: A cross-sectional analysis was conducted of 208 619 adults aged 19 and older, excluding missing data, using the 2019 Korea Community Health Survey. To analyze the association between objective SI and UMN, the chi-square test and logistic regression analysis were performed. Results: The prevalence of UMN was 1.14 times higher (odds ratio [OR], 1.14; 95% confidence interval [CI], 1.06 to 1.23) among those with SI than among those without SI, and the OR for groups with 5 SI types was 2.77 (95% CI, 1.86 to 4.12) compared to those with no SI types. In addition, a stratified analysis by age group showed that the association between SI and UMN existed even in groups under 64 years old. However, among those aged 65 and older, SI was associated with an OR of 1.53 (95% CI, 1.37 to 1.71) for UMN compared to non-SI. As the number of SI types increased, the prevalence of UMN also increased, indicating a strong association between SI and UMN in older adults. Conclusions: This study found that individuals with SI experienced UMN due to fear and anxiety about interpersonal relationships. Therefore, based on the results of this cross-sectional study, it is necessary to investigate the causal relationship between SI and UMN through future longitudinal data.