• Korean Journal of Human Ecology
• /
• v.24 no.4
• /
• pp.555-569
• /
• 2015

During a design process of a protective equipment for sports activities, minimizing movement restrictions is important for enhancing its functions particularly for protection. This study presents a three-dimensional(3D) modeling methodology for designing baseball catcher's leg guards that will allow maximum possible performance, while providing necessary protection. 3D scanning is performed on three positions frequently used by a catcher during the course of a game by putting markings on the subject's legs at 3cm intervals : a standing, a half squat with knees bent to 90 degrees and 120 degrees of knee flexion. Using data obtained from the 3D scan, we analyzed the changes in skin length, radii of curvatures, and cross-sectional shapes, depending on the degree of knee flexion. The results of the analysis were used to decide an on the ideal segmentation of the leg guards by modeling posture. Knee flexions to 90 degrees and to $120^{\circ}$ induced lengthwise extensions than a standing. In particular, the vertical length from the center of the leg increases to a substantially higher degree when compared to those increased from the inner and the outer side of the leg. The degree of extension is varied by positions. Therefore, the leg guards are segmented at points where the rate of increase changed. It resulted in a three-part segmentation of the leg guards at the thigh, the knee, and the shin. Since the 120 degree knee-flexion posture can accommodate other positions as well, the related 3D data are used for modeling Leg Guard (A) with the loft method. At the same time, Leg Guard (B) was modeled with two-part segmentation without separating the knee and the shin as in existing products. A biomechanical analysis of the new design is performed by simulating a 3D dynamic analysis. The analysis revealed that the three-part type (A) leg guards required less energy from the human body than the two-part type (B).

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.9 no.4
• /
• pp.351-359
• /
• 2007

Multi-axial compression tests have been frequently conducted to evaluate the in situ properties of rock masses and the mechanical behaviors of rock strata through the model tests. Without the proper boundary condition for the model tests, the mechanical behavior of rock mass would deviate, as can be expected, from the in situ conditions. The boundary condition will affect the internal stress distribution of the specimens and cause some distortion on the measurement. In this study, a design process regarding the steel brush, which has been employed for multi-axial compression test to reduce the frictional restraint along the specimen/loading platen interface, is introduced. The individual brushes are regarded as a simple column and beam to calculate the cross-sectional size and length of the brushes in consideration of the buckling capacity and the allowable deflection.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.23
• /
• pp.10095-10099
• /
• 2015

Background: The present study was conducted to determine knowledge level of technicians working in hospitals about testicular cancer (TC) and self-examination of testicles (TSE) and to determine levels of consciousness and implementation status about TSE. Materials and Methods: This cross-sectional study was conducted with technicians working in hospitals (n=243) between $2^{nd}$ January-$31^{st}$ May 2012 at private and governmental hospitals in urban Kayseri. Healthy control subjects (n=235) who were similar to technicians in terms of age, education level and income status were also included to the study. Chi-square test was used in comparison of categorical variables. Results: Technicians were significantly more aware of TC than controls, but the latter were found to have significantly more information about TSE. There was no significant difference between the two groups in terms of knowing how to do TSE and 80% of both groups were unaware this exam. Of technicians, 19.8% and of controls, 25.5% did TSE, the difference being statistically insignificant. First reason for not doing TSE was "not-knowing" among technicians (48.1%) while it was "ignorance" among controls (66.8%). Of technicians doing TSE, 37.5% did as it came to their mind while 51.7% of controls performed TSE several times in the previous year. Technicians were significantly more afraid of getting TC than controls (p=0.037). Conclusions: It was determined in the present study that rates of TSE were similar between technicians and controls. However compliance with the recommended frequency and right method was low. Consequently, public health education should be planned and applied in order to increase the knowledge of TC and TSE.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.16
• /
• pp.6609-6612
• /
• 2014

Opisthorchis viverrini is an ongoing public health problem in Northeast Thailand. Despite continuous efforts for decades by healthcare organizations to overcome this problem, infection rates remain high. To enable related personnel to identify and address the various issues effectively, a cross-sectional study was performed to investigate prevalence and risk factors for opisthorchiasis. The target group was 3,916 Thai residents of Northeast Thailand who were 15 or over. Participants were recruited using the 30 clusters sampling technique. The data were gathered through questionnaires, focus group discussions, in-depth interviews, and stool examinations for parasite eggs (using the Modified Kato Katz method). The data were analyzed using descriptive and inference statistics; in order to ascertain the risk factors and test them using the odds ratio and multiple logistic regressions. The prevalence of opisthorchiasis was 22.7% (95%CI: 0.26 to 0.24). The province with the highest prevalence was Nakhorn Phanom (40.9%; female to male ratio =1:1.2). The age group with the highest prevalence was 40-49 year olds. All age groups had a prevalence >20%. Four of seven provinces had a prevalence >20%. The factors related to opisthorchiasis were (a) sex, (b) age (especially > 50), (c) proximity and duration living near a water body, and (d) eating raw and/or fermented fish. In order to reduce the prevalence of opisthorchiasis, the focus in populations living in upper Northeast Thailand should be changing their eating behaviors as appropriate to their tradition and context.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.12
• /
• pp.5083-5088
• /
• 2014

Background: Scientometrics is a useful method for management of financial and human resources and has been applied many times in medical sciences during recent years. The aim of this study was to investigate the status of science production by Iranian scientists in the gastric cancer field based on the Medline database. Materials and Methods: In this descriptive-cross sectional study Iranian science production concerning gastric cancer during 2000-2011 was investigated based on Medline. After two stages of searching, 121 articles were found, then we reviewed publication date, authors names, journal title, impact factor (IF), and cooperation coefficient between researchers. SPSS.19 was used for statistical analysis. Results: There was a significant increase in published articles about gastric cancer by Iranian researchers in Medline database during 2006-2011. Mean cooperation coefficient between researchers was $6.14{\pm}3.29$ person per article. Articles of this field were published in 19 countries and 56 journals. Those basex in Thailand, England, and America had the most published Iranian articles. Tehran University of Medical Sciences and Mohammadreza Zali had the most outstanding role in publishing scientific articles. Conclusions: According to results of this study, improving cooperation of researchers in conducting research and scientometric studies about other fields may have an important role in increasing both quality and quantity of published studies.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.11
• /
• pp.4921-4927
• /
• 2016

Background: Cervical cancer is a major preventable cancers. The, current study aimed to assess relevant knowledge and attitude of female students and hospital staff in Iran. Method: This cross-sectional study was conducted in Medical and Nursing faculties and hospitals of East-Azerbaijan Province of Iran. Participants were medical and paramedical female students and female staff in hospitals selected by stratified random sampling techniques. Tools for data collection were questionnaires for which validity and reliability had been verified (${\alpha}=0.8$). Descriptive and inferential statistics were used to analyze data with SPSS.16. Result: Response rates were 71 % (426 from 600) and 63.5% (254 from 400) for students and staff, respectively. Some 29.1% admitted that they had no information about cervical cancer, only 70 (10.3%) thinking their knowledge as high, 360 (52.9%) as intermediate, and 237 (34.9%) as low. While 93% of participants considered cervical cancer as a severe health problem, the only statistically significant relationships with knowledge were for education (p<.001) and occupation (p<.001) variables. Conclusion: Given the importance of the roles of medical students and personnel as information sources and leaders in health and preventive behavior, increasing and improving their scientific understanding seems vital. Comprehensive and appropriate education of all people and especially students and personnel of medical sciences and improving attitudes towards cervical cancer and its monitoring are to be recommended.

• Journal of Powder Materials
• /
• v.20 no.4
• /
• pp.275-279
• /
• 2013

Fe-based oxide dispersion strengthened (ODS) powders were produced by high energy ball milling, followed by spark plasma sintering (SPS) for consolidation. The mixed powders of 84Fe-14Cr-$2Y_2O_3$ (wt%) were mechanically milled for 10 and 90 mins, and then consolidated at different temperatures ($900{\sim}1100^{\circ}C$). Mechanically-Alloyed (MAed) particles were examined by means of cross-sectional images using scanning electron microscopy (SEM). Both mechanical alloying and sintering behavior was investigated by X-ray diffraction (XRD) and high resolution transmission electron microscopy (HR-TEM). To confirm the thermal behavior of $Y_2O_3$, a replica method was applied after the SPS process. From the SEM observation, MAed powders milled for 10 min showed a lamella structure consisting of rich regions of Fe and Cr, while both regions were fully alloyed after 90 min. The results of sintering behavior clearly indicate that as the SPS temperature increased, micro-sized defects decreased and the density of consolidated ODS alloys increased. TEM images revealed that precipitates smaller than 50 nm consisted of $YCrO_3$.

• Nutrition Research and Practice
• /
• v.1 no.4
• /
• pp.321-327
• /
• 2007

The purpose of this study was to assess the relationship between the mother's interest in weight control and its association with the preschooler's obesity and weight related concerns. This was a cross-sectional study based on 470 parents' self-reports. To score interests in weight control, mothers rated each of 6 items on a five-point Likert scale ranging from disagree (1) to agree (5). The perceptions of mothers' weights and their children's weights, mothers' Body Mass Index (BMI), preschoolers' Weight-Length Index (WLI) (%), and weight-related concerns were determined. The mothers' BMI was significantly correlated with interest scores of weight control in mothers (r=0.632, p<0.001) while their children's obesity was weakly correlated with the mothers' interest scores (r=0.133, p=0.025). Mothers with a high interest of weight control reported higher percentages of family history of obesity than mothers with lower interests (63.2% vs. 36.8%, p<0.001). Two-thirds of the mothers (65.4%) were accurate in their perceptions about their weights. Similarly, 63.7% of mothers knew exactly their children's weight-statuses. Compared with mothers with low interest in weight controls, mothers with high interest in weight control had lower correct-perceptions about their weights (p<0.05) but higher correct-perceptions about their children's weights. More than two-thirds of mothers (85%) reported not worrying about their children's obesity in the future. Only 14.3% of the mothers were satisfied with their current weight statuses. Three-fourths of mothers preferred exercise as an effective weight-control method for their children, 20% preferred diet therapy and 5.5% preferred behavior modification. More girls were overweight / obese, than boys (overweight: 16.1% (girl) vs. 12.8% (boy), obese: 5.4% (girl) vs. 4.5% (boy)). About 40% of overweight girls' mothers had low interests in their weight controls with low correct-perceptions in their children's weights, which suggests possible elevated risk of obesity, especially in girls, in the future.

• Transactions of Materials Processing
• /
• v.29 no.3
• /
• pp.163-171
• /
• 2020

We present a multi-step cold drawing for a non-equiatomic Co₁₀Cr₁₅Fe₂₅Mn₁₀Ni₃₀V₁₀ high entropy alloy (HEA) with a simple face-centered cubic (FCC) crystal structure. The distribution of strain in the cold-drawn Co₁₀Cr₁₅Fe₂₅Mn₁₀Ni₃₀V₁₀ HEA wires was analyzed by the finite element method (FEM). The effective strain was expected to be higher as it was closer to the surface of the wire. However, the reverse shear strain acted to cause a transition in the shear strain behavior. The critical effective strain at which the shear strain transition behavior is completely shifted was predicted to be 4.75. Severely cold-drawn Co₁₀Cr₁₅Fe₂₅Mn₁₀Ni₃₀V₁₀ HEA wires up to 96% of the maximum cross-sectional reduction ratio were successfully manufactured without breakage. With the assistance of electron back-scattering diffraction and transmission electron microscope analyses, the abundant deformation twins were found in the region of high effective strain, which is a major strengthening mechanism for the cold-drawn Co₁₀Cr₁₅Fe₂₅Mn₁₀Ni₃₀V₁₀ HEA wire.

• Journal of the Korean Wood Science and Technology
• /
• v.38 no.4
• /
• pp.292-297
• /
• 2010

Sound absorption capability and anatomical features of kagikazura (Uncaria rhynchophylla) and larch (lalix kaemferi) wood were estimated. Sound absorption coefficients had been measured by the two microphone transfer function method and anatomical features of kagikazura wood examined by SEM observation. The sound absorption coefficients of Uncaria rhynchophylla was higher than lalix kaemferi. Especially, in the frequency range of 1 to 4KHz, sound absorption coefficients of kagikazura was about 2~3 times higher than those of lalix kaemferi. Abundant and big vessel observed on the cross sectional surface of kagikazura wood and simple perforation plate observed on the longitudinal surface. It was surmised that the abundant big vessel element and simple perforation plate behaved as a sound absorbing pore.