• The Journal of Korean Academic Society of Nursing Education
• /
• v.18 no.3
• /
• pp.446-455
• /
• 2012

Purpose: This study was performed to investigate the level of knowledge, self-confidence, and intention of basic life support (BLS) and identify the reason why clinical nurses lack confidence to initiate BLS at the cardiac arrest scene. Method: A cross-sectional survey was used with questionnaires which authors developed; a BLS knowledge questionnaire and a tool for measuring the level of self-confidence and intention of performing BLS. The subjects consisted of 396 nurses by convenient sampling from ten small to medium sized hospitals in Korea. Data were collected from March to August, 2008. Data were analyzed by the SPSS/WIN 14.0 program with t-test, ANOVA, and Pearson correlation coefficients. Results: The percentile score of BLS knowledge was 40.6%, self-confidence 62.1%, and intention 73.0%. Clinical career rather than BLS knowledge has a significant effect on increasing the self-confidence and intention of performing BLS. A major reason for not performing BLS was lack of confidence in operating an AED (automatic external defibrillator). Conclusion: An effective and continuous training program especially including AED for CPR should be provided with clinical nurses to increase self-confidence and intention of performing BLS and to improve the survival of cardiac arrest patients in the hospital.

• Journal of the Ergonomics Society of Korea
• /
• v.33 no.5
• /
• pp.423-432
• /
• 2014

Objective and Background: The objective of this study was to evaluate the association of individual characteristics, work-related factors, lifestyle factors, and health problems with work ability among aging workers in Korea. Method: In this cross-sectional survey, the study population consisted of 1,594 workers who had participated in a voluntary health promotion center and private workplace. Participants completed the work ability index. Results: The mean WAI score was 37.4, while the mean age of the sample was 43.25. In the age group over 50 showed 36.26. The majority of participants rated their work ability as 'good' to 'excellent', one-third moderate and about 7.5% poor. Work ability decreased significantly with age among the men. The younger group had higher scores on the work ability index than the age group over 50, except for mental resources. By work characteristics, work ability was analyzed to be the lowest in the case of work handling heavy stuff. Lastly, as a result of health factors analysis, the good management and retention of current health status can be the measure helpful to the improvement of work ability. Conclusion and Application: According to the results, it can be a basic principle to devise and enforce preventive measures on the factors for which improvement or action is possible, together with workplace-level systematic approach, in order to improve work ability. For such measures to be realized, it is necessary to check trends in change for several years.

• Journal of Korean Critical Care Nursing
• /
• v.11 no.2
• /
• pp.63-74
• /
• 2018

Purpose : This study aimed to identify the factors influencing job satisfaction in intensive care unit (ICU) nurses. Method : Using a cross-sectional design, data collected from 145 ICU nurses working at two university hospitals with more than 1,200 beds located in B and Y city were analyzed. The instruments used for this study assessed autonomy, communication satisfaction, resilience, and job satisfaction. Data were analyzed using descriptive statistics, t-test, ANOVA, Pearson's correlation coefficient, and multiple linear regression analysis. Results : Job satisfaction was significantly correlated with communication satisfaction (r=.60, p < .001) and resilience (r=.34, p < .001). Further, job satisfaction was influenced by communication satisfaction (${\beta}=.48$, p < .001), working at a surgery ICU (${\beta}=.21$, p =.008), and dissatisfaction with nursing (${\beta}=-.24$, p =.005). The explanatory power of this model was 44.7%. Conclusion : These results suggest the need for programs to improve communication satisfaction and nursing satisfaction.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.2
• /
• pp.140-146
• /
• 2014

Stenosis is the drastic reduction in the cross-sectional area of blood vessel caused by accumulations of cholesterol. It affects the blood flow property and structure from the fluid dynamic point of view. To understand the flow phenomenon more clearly, a particle image velocimetry method is used and the fluid dynamic characteristics in a circular channel containing stenosis structure is investigated experimentally in this study. Different stenotic-structured models made of acrylic material are subjected to a pulsatile flow generated by an in-house designed pulsatile pump. The inner diameter of the tube inlet is 20 mm and the length of reduced area for stenosis ranges between 35mm and 40mm. It is circulated continuously through a circular channel by the pump system. Pressure is measured at four different sections during systolic and diastolic phase changes. The phase-averaged velocity field distribution shows a recirculation regime after the stenotic structure. The effects of the stenotic obstructions are found to be more severe when the aspect ratio is varied.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.4
• /
• pp.835-845
• /
• 1994

In this paper, the effects of the adhesive thickness and adherend roughness on the static and fatigue strengths of the adhesively bonded circular single lap joints has been investigated by an experimental method. The stacking sequence effect of the composite adherend on the static and fatigue strength and the fracture patterns of the adhesive failure were also observed. Since the circular single lap joint fails catastrophically beyond the static strength of fatigue limit, the tubular polygonal adhesively bonded joints such as triangular, tetragonal, pentagonal, hexagonal as well as elliptical joints were manufactured in order to give partial mechanical characteristics to the adhesively bonded tubular joints. These joints were tested both in static and fatigue modes. From the experimental investigations, it was found that the fatigue strength of the circular adhesively bonded joints was much dependent on the arithmetical average surface roughness of the adherends and the polygonal adhesively bonded joints had better fatigue strength characteristics than the circular adhesively bonded joints.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.7
• /
• pp.877-884
• /
• 2004

In this paper, structural analysis is performed to investigate the deformation of porous media in a proton exchange membrane fuel cell (PEMFC). Structural deformation of air plate of the fuel cell causes the change in configuration and cross sectional area of the channel. The distributions of mass flow rate and pressure are major factors to decide the performance of a PEMFC. These factors are affected by channel configuration of air plate. Two kinds of numerical air plate models are suggested for flow analyses. Deformed porous media and undeformed porous media are considered for the two models. The Numerical flow analysis results between deformed porous media and undeformed porous media have some discrepancy in pressure distribution. The pressure and velocity distribution under a working condition are numerically calculated to predict the performance of the air plates. Pressure and velocity distributions are compared for two models. It is shown that structural deformation makes difference in flow analysis results.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.2
• /
• pp.69-74
• /
• 2020

In this study, we proposed a method for surface profiling aspheric lens molds using a precision displacement sensor with a spatial scanning mechanism. The precision displacement sensor is based on the confocal principle using a broadband light source, providing a 10 nm resolution over a 0.3 mm measurable range. The precision of the sensor, depending on surface slope, was evaluated via Allan deviation analysis. We then developed an automatic surface profiling system by measuring the cross-sectional profile of a lens mold. The precision of the sensor at the flat surface was 10 nm at 10 ms averaging time, while 200 ms averaging time was needed for identical precision at the steepest slope at 25 deg. When we compared the measurement result of the lens mold to a commercial surface profiler, we found that the accuracy of the developed system was less than 90 nm (in terms of 3 sigmas of error) between the two results.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.1 no.2
• /
• pp.41-47
• /
• 1997

The flow choking in a double orifice is expected to depend on cross-sectional area ratios of the orifices, upstream Mach number and total pressure loss between the orifices. However, no research has been reported on the problems of the compressible flow through a double orifice so far. The present study investigated analytically the choke conditions of the compressible gas through a double orifice, using a simple compressible theory. The orifice area ratio, upstream Mach number, and total pressure loss were involved to find the effects that they have on the flow choking. The results of analytical method show that for orifice area ratios below 1.0, flow choking moves from the first to the second orifice as the total pressure loss increases, however, for orifice area ratios over 1.0, it occurs only at the second orifice.

• Advances in aircraft and spacecraft science
• /
• v.4 no.4
• /
• pp.467-486
• /
• 2017

A method for decoupling reliability based design optimization problem into a set of deterministic optimization and performing a reliability analysis is described. The inner reliability analysis and the outer optimization are performed separately in a sequential manner. Since the outer optimizer must perform a large number of iterations to find the optimized shape and size of structure, the computational cost is very high. Therefore, during the course of this research, new multilevel reliability optimization methods are developed that divide the design domain into two sub-spaces to be employed in an iterative procedure: one of the shape design variables, and the other of the size design variables. In each iteration, the probability constraints are converted into equivalent deterministic constraints using reliability analysis and then implemented in the deterministic optimization problem. The framework is first tested on a short column with cross-sectional properties as design variables, the applied loads and the yield stress as random variables. In addition, two cases of curvilinearly stiffened panels subjected to uniform shear and compression in-plane loads, and two cases of curvilinearly stiffened panels subjected to shear and compression loads that vary in linear and quadratic manner are presented.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.3
• /
• pp.1589-1593
• /
• 2016

Opisthorchis viverrini (OV) liver flukes are common parasites found in central and southern Laos and constitute a major public health problem in the country. Laos people continue to have the habit of extensively consuming raw or half-cooked fish which are intermediate hosts. This study aimed to determine the prevalence and factors associated with OV infection in the population of Thakek district, Khammouane Province. This cross-sectional analytic study covered 237 subjects who filled out structured questionnaires. Fecal examination for OV infection was performed by Kato's thick smear method. Data analysis was carried out using STATA Version 10.0. Multiple logistic regression was applied. The results showed that the infection rate of OV was 54.8%. Factors associated with OV infections were gender, a habit of defecation in fields and raw fish (goi bplaa dip) consumption. Opisthorchiasis and associated cholangiocarcinoma development thus appear to remain as important concerns in Laos.