• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 한국전산구조공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.351-358
• /
• 2005

Many methods have been developed and are in use for structural size optimization problems, In which the cross-sectional areas or sizing variables are usually assumed to be continuous. In most practical structural engineering design problems, however, the design variables are discrete. This paper proposes an efficient optimization method for structures with discrete-sized variables based on the harmony search (HS) meta-heuristic algorithm. The recently developed HS algorithm was conceptualized using the musical process of searching for a perfect state of harmony. It uses a stochastic random search instead of a gradient search so that derivative information is unnecessary In this paper, a discrete search strategy using the HS algorithm is presented in detail and its effectiveness and robustness, as compared to current discrete optimization methods, are demonstrated through a standard truss example. The numerical results reveal that the proposed method is a powerful search and design optimization tool for structures with discrete-sized members, and may yield better solutions than those obtained using current method.

• Transactions of the Korean Society of Mechanical Engineers
• /
• 제17권5호
• /
• pp.1074-1083
• /
• 1993

NC simulation has been used to replace the test cutting of NC machining. Although it can reduce the NC part programming effort, it still has a problem. If any error is found during the simulation, then the part has to be reprogrammed and it is time consumming. This paper presents a method for verifying and editing the NC code after the post-processing without going back to the part programming stage. A data structure and an algorithm to verify and edit the NC code interactively with the aid of graphics is introduced. Z-map method is used for the shaded image display and cross-sectional view display of the macined parts. The method was implemented in a IBM/PC-386 with MS-Windows software, and the multi-window function of the of the MS-Windows is used for the simultaneous editing and verification.

• Journal of Applied Reliability
• /
• 제6권3호
• /
• pp.205-212
• /
• 2006

The purpose of this article is about the accelerated product-reliability-test method of the changing colors of mobile products, which are majorly from the frequent touching of sweating fingers. Such problems of changing colors of mobile products have found mostly In metallic paint containing aluminum paste pigments. Also we found that the color of Al Paste is changed by human sweat. Therefore, the accelerated experimental method has been tested as follow: applying the various concentration of lactic acid, which is the changing color components from human sweat, and deeping the testing sample under temperature of $60^{\circ}C$ in dilutelactic acid with water. From the series of tests, the most optimum concentration of lacticacid has been obtained in 10wt% and the sample is observed to be almost same effect as natural changing of colors by human touching after the test. It has been also confirmed from the cross-sectional analysis. In detail, the testing sample has changed its color in 48hr by changing color effect of Alpaste with 10 wt% of lactic acid, and the digit of $\Delta$ E has measured 10.9 after the test.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제7권2호
• /
• pp.347-365
• /
• 2013

The performance of finger-vein recognition methods is limited by camera optical defocusing, the light-scattering effect of skin, and individual variations in the skin depth, density, and thickness of vascular patterns. Consequently, all of these factors may affect the image quality, but few studies have conducted quality assessments of finger-vein images. Therefore, we developed a new finger-vein recognition method based on image quality assessment. This research is novel compared with previous methods in four respects. First, the vertical cross-sectional profiles are extracted to detect the approximate positions of vein regions in a given finger-vein image. Second, the accurate positions of the vein regions are detected by checking the depth of the vein's profile using various depth thresholds. Third, the quality of the finger-vein image is measured by using the number of detected vein points in relation to the depth thresholds, which allows individual variations of vein density to be considered for quality assessment. Fourth, by assessing the quality of input finger-vein images, inferior-quality images are not used for recognition, thereby enhancing the accuracy of finger-vein recognition. Experiments confirmed that the performance of finger-vein recognition systems that incorporated the proposed quality assessment method was superior to that of previous methods.

• Journal of Electrical Engineering and Technology
• /
• 제12권5호
• /
• pp.1842-1850
• /
• 2017

Reducing the noise and vibration of the BLDC motors is very essential for some special applications. In this paper, a new structural design is introduced to increase the natural frequencies of the stator in BLDC motors as increasing the natural frequencies can reduce the severe effects of the structural resonances, including high levels of noise and vibration. The design is based on placing a single hole on definite regions at the stator cross sectional area (each region contains one tooth and its upper parts in the stator yoke) in an optimum way by which the natural frequencies at different modes are shifted to the higher values. The optimum diameter and locations for the holes are extracted by the Response Surface Methodology (RSM) and the modal analyses in the iterative process are done by Finite Element Method (FEM). Moreover, the motor performance by the optimum stator structure is analyzed by FEM and compared with the prototype motor. Preventing the stator magnetic saturation and the motor cogging torque enhancement are the two constraints of the optimization problem. The optimal structural design method is applied experimentally and the validity of the design method is confirmed by the simulated and experimental results.

• Steel and Composite Structures
• /
• 제2권4호
• /
• pp.297-314
• /
• 2002

An energy method of analysis is presented which can be used to study the inelastic lateral-distortional buckling of hot-rolled I-sections continuously restrained at the level of the tension flange. The numerical modelling leads to the incremental and iterative solution of a fourth-order eigenproblem, with very rapid solutions being obtainable, so as to enable a study of the factors that influence the strength of continuously restained I-beams to be made. Although hot-rolled I-sections generally have stocky webs and are not susceptible to reductions in their overall buckling loads as a result of cross-sectional distortion, the effect of elastic restraints, particularly against twist rotation, can lead to buckling modes in which the effect of distortion is quite severe. While the phenomenon has been studied previously for elastic lateral-distortional buckling, it is extended in this paper to include the constitutive relationship characteristics of mild steel, and incorporates both the so-called 'polynomial' and 'simplified' models of residual stresses. The method is validated against inelastic lateral-torsional buckling solutions reported in previous studies, and is applied to illustrate some inelastic buckling problems. It is noted that over a certain range of member slenderness the provisions of the Australian AS4100 steel standard are unconservative.

• Structural Engineering and Mechanics
• /
• 제20권3호
• /
• pp.293-312
• /
• 2005

In this paper, free vibration of rotating beam with random properties is studied. The cross-sectional area, elasticity modulus, moment of inertia, shear modulus and density are modeled as random fields and the rotational speed as a random variable. To study uncertainty, stochastic finite element method based on second order perturbation method is applied. To discretize random fields, the three methods of midpoint, interpolation and local average are applied and compared. The effects of rotational speed, setting angle, random property variances, discretization scheme, number of elements, correlation of random fields, correlation function form and correlation length on "Coefficient of Variation" (C.O.V.) of first mode eigenvalue are investigated completely. To determine the significant random properties on the variation of first mode eigenvalue the sensitivity analysis is performed. The results are studied for both Timoshenko and Bernoulli-Euler rotating beam. It is shown that the C.O.V. of first mode eigenvalue of Timoshenko and Bernoulli-Euler rotating beams are approximately identical. Also, compared to uncorrelated random fields, the correlated case has larger C.O.V. value. Another important result is, where correlation length is small, the convergence rate is lower and more number of elements are necessary for convergence of final response.

• Journal of the Korean Society for Precision Engineering
• /
• 제24권7호
• /
• pp.98-105
• /
• 2007

In modern industries, materials are required that possess multi-functional properties and at the same time flexibility in their shapes with structural stability. The major technology realizing this requirement consists of thinning metal wires and laying them with stable contact nodes. This research has dealt with a new method to manufacture thin wires by drawing without applying dies, but with introducing enforced necking, which enables to process multi-ends. Based on the new method, the process dynamics was modelled and its steady-state characteristics were analyzed. Results showed that the profiles of the material velocity in the drawing zone increased with a downward convex shape, while the cross-sectional area decreased with the shape of upward convex. The microwave heating turned out to be effective in wire drawing, but dependent on the input feeding direction. The variation in the diameters of the drawn wires was negatively affected by increasing the drawing ratio.

• Journal of Environmental Science International
• /
• 제12권2호
• /
• pp.119-124
• /
• 2003

An effective grafting method for jujube nursery trees was developed to shorten the operation time, improve the percentage of "takes" and shoot emergence, and form the better graft union. Out of 7 grafting methods the splice, modified scion Ono graft and the bark graft showed relatively short operation time during the grafting operation comparing to the modified rootstock Ono graft or the chip budding. Among these methods, the bark graft demonstrated 100% "takes", but the modified scion Ono graft or the standard Ono graft showed 58.3% of "takes". The percentages of the vegetative shoot emergence were 100% fir the bark graft, 70% f3r the modified scion Ono graft and lower emergence percent for the rest grafting methods. The union tissue formation for the modified scion Ono graft, the bark graft, or the whip-and-tongue graft was significantly larger than the standard Ono graft or the splice graft. In a close examination of the cross sectional areas of the graft union formation through the microscope, the bark graft was superior, the standard Ono graft was inferior and rest of the grafting methods were intermediate.ing methods were intermediate.

• Journal of the Korean Society of Physical Medicine
• /
• 제10권3호
• /
• pp.9-17
• /
• 2015

PURPOSE: This paper aims to present the available angle to evaluate the severity of forward head posture (FHP) with the observation method and photographic method. METHODS: A cross-sectional observation research design study consisted of 29 subjects who was divided two groups (slight FHP group, moderate FHP group) in Eulji university was used. We evaluated the FHP and the angles including CranioVertebral Angle (CVA), Head Tilting Angle (HTA), Head Position Angle (HPA) and Forward Shoulder Angle (FSA) with the Body style S-8.0 (South Korea, LU Commerce). RESULTS: The mean of CVA, FSA from the slight FHP group was shown higher than moderate severe FHP group. According to independent t-test result, but there was no difference among all angles in two groups. The linear discriminate analysis showed the size of distinction of FSA was the biggest, and then CVA, HTA and HPA were in the order. 55.6% of FSA is properly classified in the slight FHP group. CONCLUSION: The FSA is the best to distinguish the severity of FHP and then CVA as the second best. Therefore, FSA is recommended to check the FHP.