• Journal of Dental Rehabilitation and Applied Science
• /
• v.22 no.2
• /
• pp.173-180
• /
• 2006

Objectives The aim of this study is to compare the quality of root canal preparation completed using MFile-$System^{(R)}$ instrument ( Komet, Gebr.Brsaseler, Germany) and conventional stainless steel file in the canals of Maxillary molar teeth that had a canal curvature between $25^{\circ}$ or more Materials & Methods Buccal canals of 24 first and second maxillary molar teeth, extracted for periodontal and prosthetic reasons were used. Tissue fragments and calcified debris were removed from teeth by scaling and the teeth were stored in 10% formalin solution for 24 hour. Then, teeth were stored in saline until used. To be included the roots had to have completed formed apices and angle of curvature ranging between $25^{\circ}$ or more according to the criteria described by Schneider(1971). Palatal and Second mesiobuccal canals were not included. Teeth were embedded into transparent acrylic. The teeth were randomly divided into two experimental groups. All teeth were scanned by Dental CT (PSR9000N, Asahi, Japan) to determine the root canal shape before instrumentation. Image slices were prepared from the apical end point to the pulp chamber. The first two sections were 2 mm from the apical end of root and 2 mm below the orifice. Further section was recorded, dividing the distance between the sections of apical and coronal levels into two equal lengths. 12 teeth were instrumented using stainless steel fileand another 12 teeth were instrumented using MFile-$System^{(R)}$. Following the completion of the instrumentation, the teeth were again scanned and compared with the cross sectional images taken prior to canal preparation. Amount of transportation and centering ability was assessed. Student's t-test was used for statistical analysis. Result Less transportation occurred with MFile-$System^{(R)}$ rotary instrumentation than stainless steel instrument. MFile-$System^{(R)}$ had better centering ability than stainless steel instrument. Conclusion MFile-$System^{(R)}$ rotary instrumentation transported canals less and had good centering ability.

• Journal of Technologic Dentistry
• /
• v.31 no.3
• /
• pp.67-85
• /
• 2009

This study aims to provide the research for dental technician's stress prevention and management with basic materials by understanding dental technician's psychosocial stress level and examining relevant factors. The subject of this study is 255 dental technologists who work mainly in Seoul Gyeonggi district for a month of April of 2009 and I conducted cross-sectional study through self administered survey. The contents of survey include general feature, occupational feature, health behavior feature. I used Karasek's Job Content Questionnaire, JCQ and Psychosocial well-being index, PWI-SF as means of measurement. To compare the level of dental technician's psychosocial stress, I conducted t-test and ANOVA and I measured the factors that are related with psychosocial stress symptom with step by step multiple regressive analysis. According to the result of Cronbach's a value which is yielded to verify the reliability of means of measurement, the reliability of concept is sufficient. The detailed result of this study is as follows. 1. According to the result of analyzing the stress symptom in accordance with general feature and occupational feature, those dental technologists who are older and not married, graduate from junior college, have lower position, work at university hospital or general hospital show lower stress(p<0.05). There is no difference in the level of psychosocial stress with regard to duty related feature, period of service, daily average working hours, monthly average pay. 2. With regard to health behavior feature, those dental technologists who control weight better and have meal more regularly show lower stress(p<0.05). Those dental technicians who smoke, drink liquid and take a suitable sleep show low stress but the difference does not have significance statistically. 3. With regard to the factors of stress in the workplace, those dental technicians who have lower duty related requirement, have higher duty related control ability, have higher social support, have less instability of employment and have less workload and physical burden show lower stress(p<0.05). 4. According to the result of analyzing the factors that influence dental technologist's stress symptom, social support has the most enormous influence on stress symptom. Unstable employment, regular exercise, regular eating, daily average sleeping hours and technological capacity are also important in this order. According to the result of this study, those dental technicians who have higher social support, less instability of employment, do exercise more regularly, take enough sleep more soundly and have higher technological capacity show lower psychosocial stress symptom. Therefore, to adjust appropriately the dental technician's stress and properly maintain and improve the dental technician's mental health, effective management plan that enables dental technicians to maintain smooth human relationships for dental technicians should be sought. In addition, heath education and health management for dental technicians should be given more thoroughly so that they can establish desirable health behavior in daily life.

• The Journal of Korean Academy of Prosthodontics
• /
• v.38 no.2
• /
• pp.200-213
• /
• 2000

Lasers have given dentistry a new rapid, economic, and accurate technique for metal joining. Although laser welding has been recommended as an accurate technique, there are some limitations with this technique. For example, the two joining surfaces must have a tight-fitting contact, which may be difficult to achieve in some situations. The tensile samples used for this study were made from a custom-made pure titanium and type III gold alloy plates. 27 of 33 specimens were sectioned perpendicular to their long axis with a carborundum disk and water coolant. Six specimens remained and served as the control group. A group of 6 specimens was posed as butt joints in custom parallel positioning device with a feeler gauge at each of three gaps : 0.00, 0.25. and 0.50mm. All specimens were then machined to produce a uniform cross-sectional dimension, none of the specimens was subjected to any subsequent form of heat treatment. Scanning electron microscopy was performed on representative tested specimens at fractured surfaces in both the parent metal and the weld. Vickers hardness was measured at the center of the welds with a micropenetrometer using a force of 300gm for 15 seconds. Measurement was made at approximately $200{\mu}m\;and\;500{\mu}m$ deep from each surface. One-way analysis of variance (ANOVA) and Scheffe's test was calculated to detect differences between groups. The purpose of this study is to compare the strength and properties of the joint achieved at various butt Joint gaps by the laser welding of type III gold alloy and pure titanium tensile specimens in an argon atmosphere. The results of this study were as follows : 1. When indexing and welding pure titanium, there was no decrease in ultimate tensile strength as compared with the unsectioned alloys for indexing gaps of 0.00 to 0.50mm, although with increasing gap size may come increased distortion (p>0.05). 2. When indexing and welding type III gold alloy, there were significant differences in ultimate tensile strength among groups with weld gaps of 0.00mm, 0.25 and 0.50mm, and the control group. Group with butt contact without weld gap demonstrated a significant higher ultimate tensile strength than groups with weld gaps of 0.25 and 0.50mm (p<0.05). 3. When indexing and welding the different metal combination of type III gold alloy and pure titanium, there were significant differences in ultimate tensile strength between groups with weld gaps of 0.00, 0.25, and 0.50mm. However, the mechanical properties of the welded joint would become too brittle to be acceptable clinically (p<0.05). 4. The presence of large pores in the laser welded joint appears to be the most important factor in controlling the tensile strength of the weld in both pure titanium and type III gold alloy.

• Korean Business Review
• /
• v.22 no.1
• /
• pp.77-101
• /
• 2009

The main purpose of this study is to assess the effect of using Balanced Scorecard, and relationship among learning and growth performance, internal business performance, customer performance, financial performance, and business performance. To achieve this study, theoretical and empirical studies related to Balanced Scorecard were carried out simultaneously. A field survey was undertaken through questionnaire sampling a population of construction firms. The established hypotheses related to Balanced Scorecard and organizational performance were verified by the paired-t test analysis using SPSS. The result of this research are as follows : First, BSC firm's learning and growth performance are higher than those of before BSC adopting firms significantly. Second, BSC firm's internal business performance level is higher than that of before BSC firm's significantly. Third, BSC firm's customer performance level is higher than that of before BSC firm's significantly. Fourth, BSC firm's financial performance level is higher than that of before BSC firm's significantly. Fifth, BSC firm's Business performance level is higher than that of before BSC firm's significantly. This study contributes to the BSC research by being the study focus on the BSC at the general indicators and provides evidence that may help understanding the possible relationship between BSC adoption and improvement of organizational performance. There are some limitations, however, of this study. The result are based on a cross sectional sample of construction firms, which may not be reflective of the entire population.

• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• v.17 no.1
• /
• pp.3-9
• /
• 2006

Objectives: Obesity is one of risk factors for psychological and social adjustment problems (depression, low self esteem, low school function etc). Quality of life(QOL) is comprehensive and multidimensional construct including physical, emotional, social and school functioning. Some authors reported that child and adolescent obesity is associated with impaired QOL. This study was to examine the association between QOL and body mass index (BMI) in middle school students. Methods : Cross sectional analysis of 471 adolescents between the ages of 13 and 14 years ($mean{\pm}SD,\;13.4{\pm}0.6$), who attended one of middle schools in Seoul, Korea. Participants' QOL were scored by using Korean version of pediatric QOL inventory generic score scale ($PedsQL^{TM}$ 4.0). Participants had a $mean{\pm}SD\;BMI\;of\;21.3{\pm}4.0$. Self reports and parent proxy reports using $PedsQL^{TM}$ 4.0 were administered to measure participant's QOL. Participants were divided into four groups by BMI (Male: obesity group >26.5, at risk group 23.2-26.5, normal weight group 15.8-23.1, underweight group <15.8, Female : obesity group >25.2, at risk group 22.9-25.2, normal weight group 16.0-22.8, underweight group <16.0). Results : Compared with other groups, obese adolescents reported significantly(p<0.01) love. QOL in all domains. Obese adolescents were more likely to have impaired QOL than normal weight adolescents (Odds Ratio, 8.3, 95% confidence interval, 4.0-16.7). Conclusion : Obese adolescents have lower QOL than normal weight adolescents. Psychiatrist, parents, and teachers need to be informed of the risk fur impaired QOL in obese adolescents to target interventions that could enhance health outcomes.

• Journal of Navigation and Port Research
• /
• v.44 no.4
• /
• pp.305-311
• /
• 2020

Rising sea levels along the coast from global warming causes the increase of wave energy along the coast. This rise in sea levels results in relatively deep water levels, which would incur the loss of sand that had not occurred in the past from erosion in coastal areas. Generally, it has been challenging to protect against coastal erosion, and the slope, cross-sectional shape, and materials are selected for the site conditions depending on the change in external forces. However, the application of counter measures based on insufficient understanding of the phenomenon is causing various damage, indicating the need for technological development and converging technologies to improve credibility. In this study, we developed eco-friendly permeable biopolymer concrete blocks to control the coastal erosion by using the Bio-Coast, an effective porous structure that mitigates the destructive erosion caused by the rising sea levels. The hexagonal design of Bio-Coast was derived from the honeycomb, columnar joints, and clover, which are durable and stable structures in nature, and the design was changed to apply bumps on the Bio-Coast filling in the form of a clover to reduce wave overtopping and run-up. Applying the field condition of beaches on the east coast of Korea, the block weight and size were decided and the prototype blocks were manufactured and are ready for field placement. In particular, it is intended to protect coastal areas from destructive erosion by natural and artificial external forces, and to extend the design to river,s lakes, and natural walking trails, to improve the efficiency of quality control and process control through the use of blocks.

• Korea Journal of Hospital Management
• /
• v.23 no.1
• /
• pp.87-106
• /
• 2018

Objective: The objective of this study is to examine the association between process quality of inpatient care and risk-adjusted, thirty-day potentially preventable hospital readmission (PPR) rates. Data Sources/Study Setting: This was an observational cross-sectional study of nonfederal acute-care hospitals located in two states California and Florida, discharging Medicare patients with a principal discharge diagnosis of heart failure, acute myocardial infarction, or pneumonia January through December 31, 2007. Data were obtained from the Healthcare Cost and Utilization Project State Inpatient Database of the Agency for Healthcare Research and Quality, Centers for Medicare and Medicaid Services Hospital Compare database, and the American Hospital Association Annual Survey of Hospitals. Study Design: The dependent variable of this study is condition-specific, risk-adjusted, thirty-day potentially preventable hospital readmission (PPR). 3M's PPR software was utilized to determine whether a readmission was potentially preventable. The independent variable of this study is hospital performance for process quality of inpatient care, measured by hospital adherence to recommended processes of care. We used multivariate hierarchical logistic models, clustered by hospitals, to examine the relationship between condition-specific, risk-adjusted, thirty-day PPR rates and process quality of inpatient care, after taking clinical and socio-demographic characteristics of patients and structural and operational characteristics of hospitals into account. Findings: Better performance on the process quality metrics was associated with better patient outcome (i.e., low thirty-day PPR rates) in pneumonia, but not generally in two cardiovascular conditions (i.e., heart failure and acute myocardial infarction). Practical Implication: Adherence to the process quality metrics currently in use by CMS is associated with risk-adjusted, thirty-day PPR rates for patients with pneumonia, but not with cardiovascular conditions. More evidence-based process quality metrics closely linked to 30-day PPR rates, particularly for cardiovascular conditions, need to be developed to serve as a guideline to reduce potentially preventable readmissions.

• Journal of Korean Public Health Nursing
• /
• v.12 no.2
• /
• pp.122-135
• /
• 1998

This study was carried out to understand the nursing needs of postpartum women during the postpartum period. The goal of study was to obtain data needed to develop maternal education programs and to improve the nursing quality for postpartum women. A cross-sectional survey design was employed in this study. The subjects were 101 postpartum women who had delivery at 2 general hospitals in Chung-Buk. Korea. Data were collected from Sep. 29 to Nov. 28. 1997 by means of a structured questionnaire. The instrument used for this study was the one which was consisted of revised Maternal Concerns Questionnaire (MCQ) developed by Bull (1979). The data were analyzed through the SPSS/PC+ program by use of frequency, t-test and ANOVA. The results of the study were as follows; 1) The mean score of concerns about 'self' was 2.98 for primipara and 2.80 for multipara but was not statistically significant difference. Among the items of concerns 'for self', 'Being good mothers' was the highest (primipara 3.93. multipara 3.75). 2) The mean score of concerns about 'baby' was 3.64 for primipara and 3.53 for multipara but was not statistically significant difference. Among the items of concerns 'for baby', 'Normal growth and development' was the highest (primipara 3.91. multipara 3.90). 3) The mean score of concerns about 'husband' was 3.33 for primipara and 3.06 for multipara and was statistically significant difference (t=2.11. p=0.03). Among the items of concerns 'for husband', 'Husband being a good father' was the highest (primipara 3.87, multipara 3.77). 4) The mean score of concerns about 'family' was 2.65 for primipara and 2.80 for multipara but was not statistically significant. Among the items of concerns 'for family', 'Change in the family's lifestyle' was the highest(primipara 3.01, multipara 2.93, t=-1.99, p=0.04). 5) The mean score of concerns about 'community' was 2.48 for primipara and 2.42 for multipara but was not statistically significant. Among the items of concerns 'for community'. 'Getting to health care facilities' was the highest (primipara 2.48, multipara 2.42). 6) On considering the relationship between the postpartum women's nursing needs and their general characteristics, 'regularly antenatal care' was statistically significant (t=2.29. p=0.02). In conclusion, recognition of maternal concerns can be used by nurses to identify nursing diagnoses and to develop care plans that reflect the patient's priorities.

• Journal of the Korea Concrete Institute
• /
• v.28 no.3
• /
• pp.365-373
• /
• 2016

Ultra-High-Performance Steel Fiber-Reinforced Concrete (SUPER Concrete) exhibits improved compressive and tensile strengths far superior to those of conventional concrete. These characteristics can significantly reduce the cross sectional area of the member and the anchorage strength of a headed bar is expected to be improved. In this study, the anchorage strengths of headed bars with $4d_b$ or $6d_b$ embedment length were evaluated by simulated exterior beam-column joint tests where the headed bars were used as beam bars and the joints were cast of 120 or 180 MPa SUPER Concrete. In all specimens, the actual yield strengths of the headed bars over 600 MPa were developed. Some headed bars were fractured due to the high anchorage capacity in SUPER Concrete. Therefore, the headed bar with only $4d_b$ embedment length in 120 MPa SUPER Concrete can develop a yield strength of 600 MPa which is the highest design yield strength permitted by the KCI design code. The previous model derived from tests with normal concrete and the current design code underestimate the anchorage capacity of the headed bar anchored in SUPER Concrete. Because the previous model and the current design code do not consider the effects of the high tensile strength of SUPER Concrete. From a regression analysis assuming that the anchorage strength is proportional to $(f_{ck})^{\alpha}$, the model for predicting anchorage strength of headed bars in SUPER Concrete is developed. The average and coefficient of variation of the test-to-prediction values are 1.01 and 5%, respectively.

• Journal of the Korea Convergence Society
• /
• v.9 no.1
• /
• pp.233-240
• /
• 2018

The aim of this study was to investigate the cardiometabolic risk factors (CRF) of community dwelling women based on a combination of body mass index (BMI) and waist circumference (WC). This cross-sectional study was based on 1,447 subjects between 30 and 60 years of age. Subjects were categorized into 4 groups by BMI and WC [group 1, BMI<$25kg/m^2$ and WC<85 cm; group 2, BMI<$25kg/m^2$ and WC>85 cm; group 3, BMI>$25kg/m^2$ and WC<85 cm; and group 4 (BMI>$25kg/m^2$ and WC>85 cm. Logistic regression analyses showed that subjects in group 2 had 1.75 times increased risk of clustering of 2 or more CRFs compared with subjects in group 1 (p<0.001). In conclusion, early detection of people with normal weight but high waist circumference may prevent them from getting worse by implementation of lifestyle intervention, consisting of regular exercise and healthy eating. In addition, further studies on appropriate exercise contents for them should be examined.