• Journal of Korean society of Dental Hygiene
• /
• v.19 no.5
• /
• pp.665-676
• /
• 2019

Objectives: The purpose of the study was to analyze the association between indirect vision skills and neck, shoulder, and back pain in dental hygienists. Methods: This cross-sectional study included 85 dental hygienists working full-time at dental clinics. A survey was performed for musculoskeletal symptoms in the neck, shoulders, and back of the subjects. The O'Connor tweezer dexterity test was performed using a mirror to evaluate their indirect vision skills. For statistical analyses, the t-test and one-way analysis of variance were performed. Results: The neck was the most common region of musculoskeletal pain (89.4%). The most intense pain was experienced in the neck (70.6%) and right shoulder (60.0%). Neck pain (20.0%) caused the most interference with clinical practice. Indirect vision skills were lower in the group with severe pain in the left shoulder or with high interference in work due to the left shoulder pain (p=0.026 and p= 0.017, respectively) or right shoulder pain (p=0.004). Conclusions: In this study, neck pain was a major musculoskeletal symptom among dental hygienists, and poor indirect vision skills were associated with the development of shoulder pain. Therefore, to prevent such musculoskeletal symptoms, dental hygienists should become proficient in indirect visualization, which enables a balanced and neutral posture.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.22 no.4
• /
• pp.492-500
• /
• 2019

Equal channel angular pressing(ECAP) is a severe plastic deformation technique capable of introducing large shear strain in bulk metal materials. However, if an ECAPed material has an inhomogeneous microstructure and anisotropic mechanical properties, this material is difficult to apply as structural components subjected to multi-axial stress during use. In this study, extruded oxygen-free copper(OFC) rods with a large diameter of 42 mm are extruded through ECAP by route Bc up to 12 passes. The variations in the microstructure, hardness, tensile properties, and microstructural and mechanical homogeneity of the ECAPed samples are systematically analyzed. High-strength OFC rods with a homogeneous and equiaxed-ultrafine grain structure are obtained by the repeated application of ECAP up to 8 and 12 passes. ECAPed samples with 4 and 8 passes exhibit much smaller differences in terms of the average grain sizes on the cross-sectional area and the tensile strengths along the axial and circumferential directions, as compared to the samples with 1 and 2 passes. Therefore, it is considered that the OFC materials, which are fabricated via the ECAP process with pass numbers of a multiple of 4, are suitable to be applied as high-strength structural parts used under multi-axial stress conditions.

• Journal of Preventive Medicine and Public Health
• /
• v.52 no.3
• /
• pp.147-153
• /
• 2019

Objectives: The purpose of this study was to evaluate the association between body mass index (BMI) and severe lower urinary tract symptoms (LUTS) in Korean males. Methods: This study was conducted on males aged ${\geq}50years$ who participated in the 2011 Korean Community Health Survey. LUTS severity was assessed using the Korean version of the International Prostate Symptom Score (IPSS) questionnaire, and was dichotomized as severe (IPSS >19) and non-severe ($IPSS{\leq}19$). BMI was divided into 6 categories: <18.5, 18.5-22.9, 23.0-24.9, 25.0-27.4, 27.5-29.9, and ${\geq}30.0kg/m^2$. To evaluate the relationship between BMI and LUTS, a survey-weighted multivariate Poisson regression analysis was performed to estimate prevalence rate ratios (PRRs). Age, smoking status, alcohol intake, physical activity, educational level, household income, and comorbidities were adjusted for in the multivariate model. Results: A U-shaped relationship was detected between BMI and severe LUTS. Compared with a BMI of $23.0-24.9kg/m^2$, the PRR for a BMI < $18.5kg/m^2$ was 1.65 (95% confidence interval [CI], 1.35 to 2.02), that for a BMI of $18.5-22.9kg/m^2$ was 1.25 (95% CI, 1.09 to 1.44), that for a BMI of $25.0-27.4kg/m^2$ was 1.20 (95% CI, 1.00 to 1.45), that for a BMI of $27.5-29.9kg/m^2$ was 1.11 (95% CI, 0.83 to 1.47), and that for a BMI ${\geq}30.0kg/m^2$ was 1.85 (95% CI, 1.18 to 2.88). Conclusions: This study showed that both high and low BMI were associated with severe LUTS.

• Journal of Preventive Medicine and Public Health
• /
• v.52 no.3
• /
• pp.161-169
• /
• 2019

Objectives: The objective of the present study was to validate a shortened transformational leadership (TL) scale (12 items) comprising core TL behaviour and to test the associations of this shortened TL scale with depressive symptoms. Methods: The study used cross-sectional data from 1632 employees of the overall workforce of a middle-sized German company (51.6% men; mean age, 41.35 years; standard deviation, 9.4 years). TL was assessed with the German version of the Transformational Leadership Inventory and depressive symptoms with the Hospital Anxiety and Depression Scale (HADS). The structural validity of the core TL scale was assessed with confirmatory factor analysis. Associations with depressive symptoms were estimated with structural equation modelling and adjusted logistic regression. Results: Confirmatory factor analysis and structural equation modelling showed better model fit for the core TL than for the full TL score. Logistic regression revealed 3.61-fold (95% confidence interval [CI], 2.20 to 5.93: women) to 4.46-fold (95% CI, 2.86 to 6.95: men) increased odds of reporting depressive symptoms (HADS score >8) for those in the lowest tertile of reported core TL. Conclusions: The shortened core TL seems to be a valid instrument for research and training purposes in the context of TL and depressive symptoms in employees. Of particular note, men reporting poor TL were more likely to report depressive symptoms.

• Quality Improvement in Health Care
• /
• v.25 no.1
• /
• pp.52-65
• /
• 2019

Purpose: Outbreaks resulting from medication injections have recently been on the rise in Korea despite various established guidelines. The objective of this study was to assess the degree to which healthcare professionals are aware of safe injection practice guidelines and to account for the adherence to and the deviation from safe injection guidelines formulated by healthcare providers. Methods: In November 2016, a cross-sectional anonymous questionnaire covering general characteristics of injections, patient safety culture, awareness of safe injection practices, and adherence to and barriers to safe injection guidelines was issued to healthcare providers who administer medication injections or manage and supervise these injections (N=550). Multivariate logistic regression analysis via enter method was performed to define the influencing factors of adherence of safe injection practices. Results: On average, respondents adhere to 17 of the 24 guidelines. Multivariate logistic regression found that those who were more likely to adhere to safe injection guidelines either underwent a patient safety training experience within the last year, provided care in a setting characterized by a highly developed patient safety culture, or were employed as physicians or nurses, as opposed to some other type of care provider. Barriers to safe injection guidelines were attributable to; thoughts of waste to discard leftover medicine, provisions that made adherence cumbersome, a weak culture of compliance, and insufficient amounts of injectable medicine, products, and education. Conclusions: The results of this study indicate that controllable factors like training experience of healthcare providers and patient safety culture were positively associated with adherence to safe injection practices. It was suggested that the training of healthcare providers on safe injection practices be a continuous process to promote patient safety. Additionally, there should be an increased focus on developing and implementing policies to improve patient safety culture from a prevention rather than post-management perspective.

• Journal of Korean Academy of Nursing
• /
• v.49 no.3
• /
• pp.340-348
• /
• 2019

Purpose: This study aimed to investigate the nutritional status of liver transplantation (LT) recipients and explore certain factors that influence nutritional status, including dietary patterns and physical activities. Methods: This was a cross-sectional, descriptive study. The subjects included 211 LT recipients at a medical center outpatient clinic located in Seoul, Korea. The nutritional status, dietary patterns, and physical activities of each subject were measured using the body mass index (BMI), Mini Dietary Assessment (MDA), and Global Physical Activity Questionnaire. Independent t-test, one-way analysis of variance, and multiple linear regression analysis were used to analyze the data. Results: The percentages of living and deceased donor LTs were 81.0% and 19.0%, respectively. The mean BMIs pre- and post-LT were 23.88 and $23.16kg/m^2$, respectively, and the average MDA score was 36.55. More than 60.0% of the subjects had a moderate or high level of physical activity. In multivariate analysis, a higher BMI before LT (${\beta}=.72$, p<.001), a lower Model for End-stage Liver Disease (MELD) score (${\beta}=-.18$, p<.001), and being male (${\beta}=-.10$, p=.024) contributed to better nutritional status post-LT. Patients within six months of LT were less engaged in muscle exercises than those post six months of LT (p=.020). Conclusion: LT recipients in Korea have good nutritional status and a good level of physical activity. To improve recipients' post-LT nutritional status, the pre-LT nutritional status should be considered, particularly in those with a higher MELD score. In addition, physical activity including muscle-strengthening exercises should be encouraged from an earlier stage.

• Journal of Korean Biological Nursing Science
• /
• v.21 no.1
• /
• pp.46-53
• /
• 2019

Purpose: This study was conducted to identify the effects of organizational culture for the infection control and self-efficacy on compliance with standard precautions of emergency room nurses. Methods: This cross-sectional descriptive study was conducted from 1st July to 3rd August, 2017. The participants were 200 nurses working in emergency rooms. The data was collected using structured self-report questionnaires. Results: The average scores for the organizational culture for infection control, self-efficacy and compliance with standard precautions were 5.54, 3.65, and 4.31, respectively. The organizational culture for infection control (r = .59, p< .001) and self-efficacy (r= .28, p< .001) were found to have a positive, meaningful correlation with compliance with the standard precautions. Multiple regression analysis showed that compliance with standard precautions was significantly affected by the organizational culture for infection control (${\beta}=0.55$, p< .001) and self-efficacy (${\beta}=0.13$, p= .033). Conclusion: The results for this study indicate that the organizational culture for infection control and self-efficacy were highly influential factors affecting compliance with standard precautions of emergency room nurses. Therefore, in order to improve the nurses' use of the standard precautions, it was necessary to develop and evaluate a program that considers the environmental factors and self-efficacy.

• Steel and Composite Structures
• /
• v.30 no.5
• /
• pp.483-492
• /
• 2019

In the current study, the influence of the initial lateral (sweep) shape and the cross-sectional twist imperfection on the lateral torsional buckling (LTB) response of doubly-symmetric steel I-beams was investigated. The material imperfection (residual stress) was not considered. For this objective, standard European IPN 300 beam with different unbraced span was numerically analyzed for three imperfection cases: (i) no sweep and no twist (perfect); (ii) three different shapes of global sweep (half-sine, full-sine and full-parabola between the end supports); and (iii) the combination of three different sweeps with initial sinusoidal twist along the beam. The first comparison was done between the results of numerical analyses (FEM) and both a theoretical solution and the code lateral torsional buckling formulations (EC3 and AISC-LRFD). These results with no imperfection effects were then separately compared with three different shapes of global sweep and the presence of initial twist in these sweep shapes. Besides, the effects of the shapes of initial global sweep and the inclusion of sinusoidal twist on the critical buckling load of the beams were investigated to unveil which parameter was considerably effective on LTB response. The most compatible outcomes for the perfect beams was obtained from the AISC-LRFD formulation; however, the EC-3 formulation estimated the $P_{cr}$ load conservatively. The high difference from the EC-3 formulation was predicted to directly originate from the initial imperfection reduction factor and high safety factor in its formulation. Due to no consideration of geometric imperfection in the AISC-LFRD code solution and the theoretical formulation, the need to develop a practical imperfection reduction factor for AISC-LRFD and theoretical formulation was underlined. Initial imperfections were obtained to be more influential on the buckling load, as the unbraced length of a beam approached to the elastic limit unbraced length ($L_r$). Mode-compatible initial imperfection shapes should be taken into account in the design and analysis stages of the I-beam to properly estimate the geometric imperfection influence on the $P_{cr}$ load. Sweep and sweep-twist imperfections led to 10% and 15% decrease in the $P_{cr}$ load, respectively, thus; well-estimated sweep and twist imperfections should considered in the LTB of doubly-symmetric steel I-beams.

• Journal of the Korean GEO-environmental Society
• /
• v.20 no.3
• /
• pp.31-38
• /
• 2019

To determine the optimum dynamic load test analysis for PCFT (Prestressed Concrete Filled steel Tube) hybrid composite piles that PCFT piles are connected to the top of PHC piles, the dynamic load tests and CAPWAP analyses were performed on two hybrid composite piles with steel pipe and PCFT piles as upper piles. The results of the dynamic load tests and CAPWAP analyses showed that the particle velocity measured in PCFT hybrid composite piles was equal to the wave speed of PHC piles when the strain gauges and accelerometers are attached to the surface of inner composite PHC pile after removing the steel pipe in the upper PCFT pile. In addition, when assuming that the material of that upper PCFT pile was the same as that of the lower PHC pile and the cross-sectional area of the steel pipe in upper PCFT pile was converted to that for concrete through the pile model (PM) in CAPWAP analysis, the accuracy of the CAPWAP analysis result for PCFT hybrid composite piles was very high.

• Journal of Korean society of Dental Hygiene
• /
• v.19 no.1
• /
• pp.65-78
• /
• 2019

Objectives: This study was conducted to characterize the impact of cognitive function and oral health status on mastication in senior citizens, ${\geq}65$ years of age, using senior centers in the city of Wonju, South Korea. Methods: A cross-sectional study consisting of a simple oral examination and survey questionnaires was performed in 154 individuals. General characteristics, subjective masticatory function, objective masticatory function, cognitive function, and oral health status were collected as variables. Correlation and multiple linear regression analyses were conducted. A p-value of <0.05 was considered to be statistically significant. Results: The subjective masticatory function was scored using the 5-point Likert scale. When subjective masticatory function was analyzed in groups according to cognitive function, the mean subjective masticatory function scores were 4.31, 4.09, and 3.29 in the normal group (cognitive score of ${\geq}16$), suspected dementia group (cognitive score of 1215), and mild dementia group (cognitive score of ${\leq}11$), respectively. Thus, subjective masticatory function decreased along with decreasing cognitive function. When cognitive function, subjective masticatory function, and objective masticatory function were compared with indicators of oral health status (number of functional teeth, oral dryness), subjective masticatory function exhibited a significant positive correlation with objective masticatory function (r=0.635, p<0.01), cognitive function (r=0.292, p<0.01), and total number of functional teeth, including prosthetic appliances (dentures) (r=0.305, p<0.01). According to the regression analysis, age, sex, number of functional teeth, and cognitive function affected subjective masticatory function. Conclusions: The results of this study revealed that age, sex, number of functional teeth, and cognitive function affected subjective masticatory function, whereas oral dryness did not. Therefore, dental professionals must consider subjective masticatory function when providing oral care in senior patients with low cognitive function.