• Progress in Superconductivity and Cryogenics
• /
• v.6 no.4
• /
• pp.17-21
• /
• 2004

The butt joint was verified to satisfy the thermal stability of the ITER magnet system through the ITER CS model coil test. Since the contact area in the butt joint is limited to the cross section of the cable, it is necessary to analyze and control the joining parameters precisely for improving the DC resistance. It is difficult to simulate the cables, which are composed of a lot of strands, as three-dimensional models using the commercial code. The random numbers were used to simulate many kinds of contact patterns of the strands on the bonding surface for calculating the bonding area and the DC resistance of the butt joint. The calculated DC resistance decreases with an increase of cable filling factor in terminal. The calculated DC resistance of a 0.9 cable filling factor is about 0.48 n-Ohm, which is about one-tenth of that in the CS model coil test when not considering the electrical contact resistance. From this difference, the electrical contact resistance between the strands and copper sheet was calculated.

• Clinical and Experimental Reproductive Medicine
• /
• v.40 no.2
• /
• pp.76-82
• /
• 2013

Objective: To compare the blood glucose levels, insulin concentrations, and insulin resistance during the two phases of the menstrual cycle between healthy women and patients with premenstrual syndrome (PMS). Methods: From January of 2011 to the August of 2012, a descriptive cross-sectional study was performed among students in the School of Medicine of Jahrom University of Medical Sciences. We included 30 students with the most severe symptoms of PMS and 30 age frequency-matched healthy controls. We analyzed the serum concentrations of glucose, insulin, and insulin resistance by using the glucose oxidase method, radioimmunometric assay, and homeostasis model assessment of insulin resistance equation, respectively. Results: No significant differences between the demographic data of the control and PMS groups were observed. The mean concentrations of glucose of the two study groups were significantly different during the follicular and luteal phases (p=0.011 vs. p<0.0001, respectively). The amounts of homeostasis model assessment of insulin resistance of the two study groups were significantly different in the luteal phase (p=0.0005). Conclusion: The level of blood glucose and insulin resistance was lower during the two phases of the menstrual cycle of the PMS group than that of the controls.

• Archives of Pharmacal Research
• /
• v.19 no.5
• /
• pp.342-347
• /
• 1996

Doxorubicin, one of the clinically most useful anticancer agents, is used alone or in combination with other drugs against a wide variety of tumors, recently. But cancer cells developed resistance to this agent in many ways. This resistance is an important limiting factor of doxorubicin for anticancer drug. We newly established doxorubicin-resistant HCT15/CL02 subline from parental HCT15 human adenocarcinoma colon cancer cells. HCT15/CL02 revealed resistance to doxorubicin about 85-fold of its parental cells, and it also revealed cross-resistance to actinomycin D, etoposide and vinblastine but not to displatin and tamoxifen. And verapamil, a reversal agent of multidrug-resistance (MDR) by P-glycoprotein, elevated the cytotoxicity of doxorubicin against both HCT15 and GCT15/CL02 cells. But the relative resistant rate was not reduced. Verapamil had no effects on the tosicity of cisplatin to the both cell lines. These results indicate that HCT15/CL02 cells have some functionally complex mechanisms for MDR.

• IMMUNE NETWORK
• /
• v.14 no.3
• /
• pp.149-155
• /
• 2014

We performed this study to evaluate the role of Interleukin-17 (IL-17) and Interleukin-18 (IL-18) in insulin resistance during normal pregnancy. This descriptive cross sectional study was carried out on 97 healthy pregnant women including 32, 25, and 40 individuals in the first, second, and third trimesters, respectively, and on 28 healthy non pregnant women between the autumn of 2012 and the spring of 2013. We analyzed the serum concentrations of IL-17 and IL-18 by using the enzyme linked immunosorbent assay (ELISA). Insulin resistance was measured by homeostasis model assessment of insulin resistance equation. No significant differences between the demographic data of the pregnant and non pregnant groups were observed. Insulin resistant in pregnant women was significantly higher than the controls (p=0.006). Serum IL-17 concentration was significantly different in non pregnant women and pregnant women in all gestational ages (p<0.05). Serum IL-18 level was significantly lower in subjects with first, second, and third trimesters of pregnancy in compared to non pregnant women (p<0.05). No significant correlations were found between serum IL-17 and IL-18 levels with insulin resistance (r=0.08, p=0.34 vs. r=0.01, p=0.91, respectively). Our data suggested that IL-17 and IL-18 do not appear to attribute greatly to pregnancy deduced insulin resistance during normal pregnancy.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.3 no.2
• /
• pp.187-190
• /
• 2001

Inheritance pattern of resistance to Bombyx mori nuclear polyhedrosis virus (BmNPV) was studied in an Indian silkworm stock TX by single back-cross test method. The resistant parent ［TX］, susceptible parent ［HM］, their Fl, F2, and Fl progeny back-crossed to TX [BC(R)] and HM [BC(S)] were inoculated per os with a fixed concentration of BmNPV($0.5{\times}10^{th} PIB/ml$) on the first day of second stadium. The cumulative mortality was recorded until day $10^{\times}$ post-inoculation. The results show that the resistance to BmNPV in TX fellow mono Mendelian inheritance pattern. The resistance dominated over the susceptibility at Fl. At F2, the resistant and susceptible offspring segregated in 3:1 ratio whereas at BC(S), the resistant and susceptible offspring segregated in 1:1 ratio. The response of BC(R) was more or less like the resistant parent TX which confirms the involvement of a major dominant gene conferring resistance to BmNPV in TX. The possible mechanism of inheritance of resistance in TX is discussed.

• Korean journal of applied entomology
• /
• v.48 no.2
• /
• pp.123-158
• /
• 2009

An attempt was made to stimulate future research by providing exemplary information, which would integrate published knowledge to solve specific pest problem caused by resistance. This review was directed to find a way for delaying resistance development with consideration of chemical(s) nature, of mixture, rotation, or mosaics, and of insecticide(s) compatible with the biological agents in integrated pest management (IPM). The application frequency, related to the resistance development, was influenced by insecticide activity from potentiation, residual period, and the vulnerability to resistance development of chemical, with secondary pest. Chemical affected feeding, locomotion, flight, mating, and predator avoidance. Insecticides with negative cross-resistance by the difference of target sites and mode of action would be adapted to mixture, rotation and mosaic. Mixtures for delaying resistance depend on each component killing very high percentage of the insects, considering allele dominance, cross-resistance, and immigration and fitness disadvantage. Potential disadvantages associated with mixtures include disruption of biological control, resistance in secondary pests, selecting very resistant population, and extending cross-resistance range. The rotation would use insecticides in high and low doses, or with different metabolic mechanisms. Mosaic apply insecticides to the different sectors of a grid for highly mobile insects, spray unrelated insecticides to sedentary aphids in different areas, or mix plots of insecticide-treated and untreated rows. On the evolution of pest resistance, selectivity and resistance of parasitoids and predator decreased the number of generations in which pesticide treatment is required and they could be complementary to refuges from pesticides To enhance the viability of parasitoids, the terms on the insecticides selectivity and factors affecting to the selectivity in field were examined. For establishment of resistant parasitoid, migration, survivorship, refuge, alternative pesticides were considered. To use parasitoids under the pressure of pesticides, resistant or tolerant parasitoids were tested, collected, and/or selected. A parasitoid parasitized more successfully in the susceptible host than the resistant. Factors affecting to selective toxicity of predator are mixing mineral oil, application method, insecticide contaminated prey, trait of individual insecticide, sub-lethal doses, and the developmental stage of predators. To improve the predator/prey ratio in field, application time, method, and formulation of pesticide, reducing dose rate, using mulches and weeds, multicropping and managing of surroundings are suggested. Plant resistance, predator activity, selective insect growth regulator, and alternative prey positively contributed to the increase of the ratio. Using selective insecticides or insecticide resistant predator controlled its phytophagous prey mites, kept them below an economic level, increased yield, and reduced the spray number and fruits damaged.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.3
• /
• pp.41-49
• /
• 1997

Laser spot welding offers a unique combination of high speed. precision and low heat distortion, compared with conventional resistance spot welding. This combinatin of advantages is especially attractive for the automotive industry. Until now automobile fabrication is widely used resistance spot welding, however, because of geometric and structural problem, spot welding is required many welding machine in that reason by substituting spot welding with laser welding, it save the equipment cost. In the present study we measured ultimate strength and observed bead cross section of laser welded specimen and compared with that of the resistance spot welding results in order to adapt laser welding in automobile industry. Also for strength esti- mation we calculated the residual stress of laser welded zone. All calculations are performed with the ABAQUS code on a workstation.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.6 no.2
• /
• pp.145-149
• /
• 2003

Seeing inadequate disinfection and unhygenic condition in rearing area, use of disease resistant silkworm variety is the best option. In order to this, an attempt has been made to develop the resistance to Bombyx mori densonucleosis virus (BmDNV-2) into a susceptible silkworm breed Zhenon1 by cross breeding with a resistant silkworm breed SU12 and exposing the subsequent generations to BmDNV-2 followed by the selection of individuals from the surviving batches. After seven generation the evolved DNV-2 resistant strain showed the significantly higher resistance to BmDNV-2 than control Zhenon1. The economic characters of both of the breeds were almost on par.

• Journal of Fisheries and Marine Sciences Education
• /
• v.26 no.4
• /
• pp.831-837
• /
• 2014

This paper focuses on the effects of the changes in the resistance characteristics caused by the changes of the POD shape installed in the Hydrofoil vessel, using the CFD(Computational Fluid Dynamics). We input the POD sections' basic shape as the origin of the x and y axis. Then as we cut the x-axis 0 to 2 cm, and the more we cut it, the total resistance value had increased. However, we have recognized the fact that as we cut the POD section, 3 to 5 cm, the resistance value had rather decreased. Furthermore we found out the result that as the cut partition was larger; the POD cross-section would decrease, resulting in the linear decrease of the viscous force.

• Journal of the Korean Society of Tobacco Science
• /
• v.15 no.2
• /
• pp.137-144
• /
• 1993

The present study was conducted to compare the efficiency of individual plant selection for resistance to bacterial wilt with 30 dihaploid lines derived by anther culture and Nicotiana africana method in Fl and F2 generation from a cross between Bright Yellow 4 (BY4) and NC95. F2 dihaploid lines were selected from bacterial wilt disease resistant plants screened under the naturally infested filed conditions. The populations of FB - ADH and FB MDH derived from F2 individual plants with bacterial wilt resistance showed higher resistance to the disease than the populations of Fl - ADH and Fl - MDH, respectively, and no difference for the disease resistance appeared by the haploid deriving method within a generation.