• Journal of the Korean Society of Radiology
• /
• v.12 no.3
• /
• pp.335-341
• /
• 2018

With the improvement of medical state, patients' expectations for the most advanced medical equipment are increasing. Particularly, Magnetic Resonance Image (MRI) is used as one of the core image diagnosis methods in all clinical area. However, it has been reported that many of patients who go through the examination suffer from anxiety to the severe noise level during the examination. In this study, both the noise reduction evaluation of headsets with sound-blocking materials added to existing sound-absorbing materials and the existence of sound blocking materials as artifacts on the examination image are tested. An MRI test noise is recorded as a speaker by cross-ordination the sound material (sponge) and the sound material (acrylic plate, copper plate, and 3D copper plate) inside the headset made from 3D pring. A quantitative assessment of headsets showed that the average headset value was 81.8 dB. The average dB value of the most soundproof material combination(Copper, acrylic plate, sponge, sponge) headsets on headsets with added charactering material was measured at 70.4 dB, and MRI showed that the copper was diamagnetic substance and excluded. The second most soundproof headset(Sponge, acrylic plate, 3D copper plate, sponge) was measured at 70.6 dB and MRI showed no artifacts. The same simulation of the material printed with a 3D copper PLA containing approximately 40 % copper powder resulted in no artifacts, therefore, the material output as a 3D printing was better suited for use. For MRI related research, the mutual development of 3D printing is highly anticipated.

• Journal of Crop Science and Biotechnology
• /
• v.11 no.1
• /
• pp.17-22
• /
• 2008

Aromatic rice has become popular owing to its aroma. Growing demand for aromatic rice has spurred interest in the development of domestic cultivars that offer similar combinations of grain attributes such as texture, cooking characteristics, aroma, and taste. In this study, the most important agronomic attributes and aroma of 26 cultivars from Afghanistan, Iran, and Uzbekistan, and controls from Japan, Thailand, and India were characterized. Also $F_2$ populations derived from the cross between(Jasmine 85 aromatic$\times$Nipponbare non-aromatic) and(Jasmine 85$\times$Basmati 370 aromatic) were obtained. Tasting individual grains, cooking test, 1.7% KOH sensory test, and molecular marker analysis have been applied to distinguish between aromatic and non-aromatic rice. Diversity for some traits of agronomic importance, such as plant height was detected among countries, e.g. Afghan cultivars classified as tall, and Iranian and Uzbek intermediate and short, respectively. Differentiations of panicle, grain, leaf, basal internode, and culm dimension among rice cultivars, indicating the source of rice diversity in Central Asia. According to the results, 6 of 10, 2 of 7, and 0 of 6 of Afghan, Iranian, and Uzbek rice cultivars were scored as aromatic, respectively. Therefore, Afghan cultivars are a good source of aromatic rice germplasm for Central Asia. The expression between aromatic and non-aromatic, and aromatic and aromatic combinations has been evaluated. The observed segregation ratio of these crosses in the $F_2$ populations was tested by $x^2$ analysis against the expected ratio for a single gene. A segregation ratio of 3:1 between non-aromatic and aromatic combination has been detected, while segregation has not been detected between the aromatic and aromatic combinations. Also, parallel results were obtained from the tested aromatic rice cultivars. Thus, our results suggest that a single recessive gene controls aroma in all aromatic rice cultivars.

• Journal of Powder Materials
• /
• v.16 no.2
• /
• pp.138-145
• /
• 2009

The combination of focused ion beam (FIB) and 4 point probe nanomanipulator could make various nano manufacturing and electrical measurements possible. In this study, we manufactured individual ZnO nanowire devices and measured those electrical properties. In addition, tensile experiments of metallic Au and Pd nanowires was performed by the same directional alignment of two nanomanipulators and a nanowire. It was confirmed from I-V curves that Ohmic contact is formed between electrodes and nanomanipulators, which is able to directly measure the electrical properties of a nanowire itself. In the mechanical tensile test, Au and Pd nanowires showed a totally different fracture behavior except the realignment from <110> to <002>. The deformation until the fracture was governed by twin for Au and by slip for Pd nanowires, respectively. The crystallographic relationship and fracture mechanism was discussed by TEM observations.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.8
• /
• pp.1131-1138
• /
• 2004

The objective of this study was to investigate the effects of different sources of Ca and P on urine and ileal digesta pH, and ammonia ($NH_{3}$), methane ($CH_{4}$), and odor emission. In experiment 1, eight pigs (commercial three-way cross; initial BW 67$\pm$3 kg) were arranged in a repeated 4$\times$4 Latin Square design. All pigs were equipped with a T-cannula in the distal ileum. Four corn-soybean meal based diets were formulated. Diet 1 was the control in which dicalcium phosphate (DCP) and limestone ($CaCO_{3}$) were used as the sources of inorganic P and Ca. In Diets 2 and 3, ${H_{3}}{PO_{4}}$, monocalcium phosphate (MCP), and $CaSO_{4}$replaced DCP and $CaCO_{3}$ as the inorganic sources of P and Ca. Diet 4 was similar to Diet 1 except that it was fortified with HCl to provide an acid load similar to that of diet 2. Urine and ileal digesta pH were determined in pigs fed each of these diets. In Exp. 1, urine pH decreased (p<0.05) in animals consuming diets containing ${H_{3}}{PO_{4}}$-$CaSO_{4}$ (5.85$\pm$0.38) and MCP-$CaSO_{4}$(5.73$\pm$0.30) compared with the DCP-$CaCO_{3}$ diet (6.89$\pm$0.24). In the pigs consuming ${H_{3}}{PO_{4}}$-$CaSO_{4}$, ileal digesta pH decreased compared with the control (5.52$\pm$0.28 vs. 6.66$\pm$0.17; p<0.05). Based on the results of Exp. 1, a total of four trials were performed in environmental chambers for determining how $NH_{3}$, $NH_{4}$, and odor were affected by the different dietary Ca and P sources (Exp. 2). In Exp. 2, pigs fed the ${H_{3}}{PO_{4}}$-$CaSO_{4}$ diet had decreased (30%) $NH_{3}$ emissions compared with the control (p<0.05). Also, a combination of MCP-$CaCO_{3}$-$CaCl_{12}$ decreased $NH_{3}$ emission by 15% (p<0.05). Emission of $CH_{4}$ was decreased only with the ${H_{3}}{PO_{4}}$-$CaSO_{4}$ diet with 14% (p<0.05). Odorant emission of phenolics and volatile fatty acids increased roughly three-fold with the DCP-$CaSO_{4}$ diet but was not affected by other test diets. In conclusion, acidogenic Ca and P sources in swine diets can decrease the urinary pH and reduce $NH_{3}$ and $CH_{4}$ emission from swine facilities.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.5
• /
• pp.657-666
• /
• 2017

In this study, factor analysis was performed to reduce the friction in the elevation motion of a stand for a 50-inchtelevision. Pipe type cross-section control was used for accurate positioning control of the piston rod. The pipe type was also compared with a labyrinth-type crosssection for the orifice. The frictional force was then reduced using gas seal lip technology. Specifications were chosen, and a volume compensation experiment was carried out using an apparatus for compensating the volume of the cylinder, which is compressed by the volume of the piston rod. Based on CAE and experimental considerations, the labyrinth-type orifice is preferred for reducing friction. For the gas seal lip technology, outer and inner diameters of ${\Phi}20$ and ${\Phi}8$ for the hollow rod were more appropriate when assuming the weight of a 50-inch television to be 30kgf. The third is that the result of total consideration in stability problem and performance of volume compensation for specification decision and volume compensation experiment is determined the final speculation of hollow rod ?8x?4 and riveting system. The last is that the labyrinth orifice is not founded that of the ${\O}0.4{\sim}0.6$ orifice both tests on 300 mm intervals.

• Korean Journal of Plant Taxonomy
• /
• v.41 no.1
• /
• pp.16-34
• /
• 2011

Scirpus L. s.l. of Cyperaceae has been regarded as a monophyletic group, but the taxa of Scirpus s.l. were rearranged into the five independent genera in recent molecular phylogenetic research: Bolboschoenus (Asch.) Palla, Schoenoplectus (Rchb.) Palla, Schoenoplectiella Lye, Scirpus L., and Trichophorum Pers. In this study, we examined the morphological characteristics and presented the delineation of the five genera of Scirpus s.l., including 21 taxa from South Korea. As a result of our investigation and analysis of domestic collections and those from abroad, the each taxon could be identified using key characteristics of the rhizome features; a cross-section of culm; the degree of development and the width of leaves; the shapes of the membranous region of leaf sheath; and the shapes and size of inflorescence, bract, floral scale, and achene. These major characteristics are illustrated and artificial keys are suggested in this study. In addition, we suggest a new combination for an unrecorded taxon of Schoenoplectiella that was discovered in Gangwon-do, Goseong-gun and give it the Korean name, as 'a-do-song-i-go-raeng-i'.

• Journal of the Korea Concrete Institute
• /
• v.28 no.2
• /
• pp.197-204
• /
• 2016

Concrete walls of neutron generating facilities such as fusion reactors and fission reactors become radioactive by neutron irradiation. Both low-activation and neutron shielding are a critical concern at the dismantling stage after the shutdown of facilities with a requirement of radioactive waste management. To tackle this, two types of additives were investigated in fabricating mortar specimens: synthetic high polymers and boron carbide. It is well known that a hydrogen atom is effective in neutron shielding by an elastic scattering because its mass is almost the same as that of the neutron. And boron is an effective neutron absorber with a big neutron absorption cross section. In this study, the effect of the type, shape, and size of polymers were investigated as well as that of boron carbide. Total 16 mix designs were prepared to reveal the effect of polymers on mechanical properties and neutron shielding performance. The neutron does equivalent of polymers-based mortar for fast neutrons decreased by 36 %, and the count rate of boron carbide-based mortar with regard to thermal neutrons decreased by 90 % compared to conventional mortar. These results showed that a combination of polymers and boron carbide compounds has potential to reduce the thickness of neutron shields as well as radioactive waste from reactors.

• The Journal of Korean Academy of Prosthodontics
• /
• v.38 no.2
• /
• pp.200-213
• /
• 2000

Lasers have given dentistry a new rapid, economic, and accurate technique for metal joining. Although laser welding has been recommended as an accurate technique, there are some limitations with this technique. For example, the two joining surfaces must have a tight-fitting contact, which may be difficult to achieve in some situations. The tensile samples used for this study were made from a custom-made pure titanium and type III gold alloy plates. 27 of 33 specimens were sectioned perpendicular to their long axis with a carborundum disk and water coolant. Six specimens remained and served as the control group. A group of 6 specimens was posed as butt joints in custom parallel positioning device with a feeler gauge at each of three gaps : 0.00, 0.25. and 0.50mm. All specimens were then machined to produce a uniform cross-sectional dimension, none of the specimens was subjected to any subsequent form of heat treatment. Scanning electron microscopy was performed on representative tested specimens at fractured surfaces in both the parent metal and the weld. Vickers hardness was measured at the center of the welds with a micropenetrometer using a force of 300gm for 15 seconds. Measurement was made at approximately $200{\mu}m\;and\;500{\mu}m$ deep from each surface. One-way analysis of variance (ANOVA) and Scheffe's test was calculated to detect differences between groups. The purpose of this study is to compare the strength and properties of the joint achieved at various butt Joint gaps by the laser welding of type III gold alloy and pure titanium tensile specimens in an argon atmosphere. The results of this study were as follows : 1. When indexing and welding pure titanium, there was no decrease in ultimate tensile strength as compared with the unsectioned alloys for indexing gaps of 0.00 to 0.50mm, although with increasing gap size may come increased distortion (p>0.05). 2. When indexing and welding type III gold alloy, there were significant differences in ultimate tensile strength among groups with weld gaps of 0.00mm, 0.25 and 0.50mm, and the control group. Group with butt contact without weld gap demonstrated a significant higher ultimate tensile strength than groups with weld gaps of 0.25 and 0.50mm (p<0.05). 3. When indexing and welding the different metal combination of type III gold alloy and pure titanium, there were significant differences in ultimate tensile strength between groups with weld gaps of 0.00, 0.25, and 0.50mm. However, the mechanical properties of the welded joint would become too brittle to be acceptable clinically (p<0.05). 4. The presence of large pores in the laser welded joint appears to be the most important factor in controlling the tensile strength of the weld in both pure titanium and type III gold alloy.

• Journal of the Korea Convergence Society
• /
• v.9 no.1
• /
• pp.233-240
• /
• 2018

The aim of this study was to investigate the cardiometabolic risk factors (CRF) of community dwelling women based on a combination of body mass index (BMI) and waist circumference (WC). This cross-sectional study was based on 1,447 subjects between 30 and 60 years of age. Subjects were categorized into 4 groups by BMI and WC [group 1, BMI<$25kg/m^2$ and WC<85 cm; group 2, BMI<$25kg/m^2$ and WC>85 cm; group 3, BMI>$25kg/m^2$ and WC<85 cm; and group 4 (BMI>$25kg/m^2$ and WC>85 cm. Logistic regression analyses showed that subjects in group 2 had 1.75 times increased risk of clustering of 2 or more CRFs compared with subjects in group 1 (p<0.001). In conclusion, early detection of people with normal weight but high waist circumference may prevent them from getting worse by implementation of lifestyle intervention, consisting of regular exercise and healthy eating. In addition, further studies on appropriate exercise contents for them should be examined.

• Child Health Nursing Research
• /
• v.19 no.3
• /
• pp.216-227
• /
• 2013

Purpose: Despite the well-known public health benefits of vaccination, increasing public concern about the safety of childhood vaccinations has led some parents to refuse or hesitate having their children immunized. The purpose of this study was to identify the subjectivity of parents toward refusal of childhood vaccination. Methods: Q-methodology, in which subjective viewpoints are explored and analyzed using a combination of quantitative and qualitative techniques, was used. Thirty-five participants were asked to rank 42 statements on diverse issues of childhood vaccination according to a continuous 9-point scale ranging from -4 for strongly disagree to +4 for strongly agree. Collected data was analyzed using the PC-QUANAL program. Results: The results revealed three discrete groups of parents in the refusal of children's immunization: type I, distrust; type II, concern about side effects, and type III, belief that vaccinations are unnecessary. Conclusion: Special nurse counselors who can provide correct information about vaccination based on the three types should be part of the government policy. Customized education programs to shift viewpoints should be also redeveloped according to the results in this study.