• 대한전기학회논문지
• /
• 제32권5호
• /
• pp.157-163
• /
• 1983

Positive and negative coronas in point-to-plane short gap have been investigated with the variations of point radius and gap length. Mainly the onset potentials and current pulses under various conditions were measured with a 70 MHz C.R.O. and a precise-controllable D.C. power supply. In the case of negative corona, the Trichel pulse corona, glow corona and spark regions were distinguished apparently and the critical gap lengths between them were also found clearly. In the case of positive corona, there are streamer corona, spark regions and the critical gap length between them, too. The current pulse forms of Trichel pulse corona of negative and streamer pulse corona of positive are similar in rising time, peak-to-peak time and pulse width. The glow corona current shows D.C. component in form.

• Journal of Electrical Engineering and Technology
• /
• 제9권1호
• /
• pp.106-113
• /
• 2014

Rotor eccentricity is one of the major factors that directly influence the security of horizontal electrical machines, and the critical speed of the shaft has a close relationship with vibration. This paper deals with the influence of thermal expansion on the rotor eccentricity and critical speed in large dry submersible motors. The dynamic eccentricity (where the rotor is still turning around the stator bore centre but not its own centre) and critical speed of a three-phase squirrel-cage submersible induction motor are calculated via hybrid analytical/finite element method. Then the influence of thermal expansion is investigated by simulation. It is predicted from the study that the thermal expansion of the rotor and stator gives rise to a significant air-gap length decrement and an inconspicuous slower critical speed. The results show that the thermal expansion should be considered as an impact factor when designing the air gap length.

• 한국전자통신학회논문지
• /
• 제13권1호
• /
• pp.23-28
• /
• 2018

초전도 결정의 임계 온도 $T_{CH}$에서의 비열 불연속 폭을, Gibbs 자유 에너지에 관한 열역학 관계식과 임계 자기장 $H_{CT}$의 선형 모델을 이용하여, 인가 자기장 H의 함수로 이론적으로 구한다. 그리고 구한 비열 불연속 폭을 J. Kacmarcik 등에 의한 MgCNi3 초전도체 결정 대상의 실험 결과와 비교 분석한다. 여기서 구한 비열 불연속 폭은 초전도체 결정의 비열 점프 업 현상을 잘 설명한다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.1095-1100
• /
• 2003

Experimental studies on the aerodynamic coupling effect on natural frequencies, critical speed and flutter instability of DVD disks are investigated in this paper. The experimental results are compared with the theoretical analyses where the aerodynamic effects are represented in terms of elastic, lift and damping and stiffness components. The experiments are performed using a vacuum chamber and DVD disks rotating in vacuum, open and enclosure with several different gaps between disk and wall. The following three results are given. One is that the aerodynamic effect by the surrounding air reduces the natural frequencies and critical speeds of the vibration modes. The second is that natural frequency decreases as the disk-wall gap is decreased. Finally, it is shown that the disk vibration is reduced as the gap between the disk and the rigid wall decreases.

• 한국전산유체공학회지
• /
• 제11권3호
• /
• pp.64-70
• /
• 2006

A Computational study was carried out in order to investigate the moving wall effect of a circular cylinder at a Reynolds number of $2.0{\times}10^4$. The viscous-incompressible Navier-Stokes equations and Spalart-Almaras turbulent model of the commercial CFD code were adopted for this numerical analysis. The moving wall was set parallel with the freestream, and moving speed was equal to the freestream velocity. The gap ratio is defined as the distance ratio between the circular cylinder diameter and the height from the moving wall. The results show that there is vortex shedding over the critical gap ratio and aerodynamic loads including amplitude and the Strouhal number change according to the gap ratio.

• 한국추진공학회지
• /
• 제20권2호
• /
• pp.75-85
• /
• 2016

감쇠기를 사이에 두고 여폭약과 수폭약으로 충전된 파이로 착화기는 격벽의 압력 감쇠 현상과 고에너지 물질의 충격 점화 특성을 갖는다. 고폭약의 폭굉 반응 및 비반응 물질 통과에의 폭압 감쇠와 더불어 격벽의 형상 변화를 모사하기 위해서는 충격 전달에 의한 gap test의 폭굉 모델링이 필요하다. 본 연구에서는 오일러리안 레벨셋 기법이 적용된 다중물질 하이드로 코드를 사용하여 pentolite 작약과 열폭압 RDX의 폭발 반응 및 PMMA gap을 통과하는 충격파 전달을 해석함으로써 화약-격벽간 상호작용 및 임계 두께, 음향 임피던스, go/no-go 기폭 점화에 대한 특성을 정량화하였다.

• Nuclear Engineering and Technology
• /
• 제55권3호
• /
• pp.1118-1124
• /
• 2023

Experimental study on the fluidelastic instability (FEI) of a curved tube bundle in single phase downward cross flow is investigated for the design qualification and analysis input preparation of helical coiled steam generator tubing. A 6×9 normal square curved tube array with equal and different vertical/horizontal pitch-to-diameter ratio was under-tested up to 6 m/s in term of gap flow velocity to measure the critical velocity for FEI. The critical velocity for FEI was measured at the turning point from the vibration amplitude plot along the gap flow velocity. Our test results were compared with straight tube results and published data in the design guideline. The applicability of the current design guidelines to a curved tube bundle is also assessed. We found that introducing frequency difference in a curved tube array increases the critical velocity for fluidelastic instability.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 춘계학술대회 논문집
• /
• pp.252-255
• /
• 2009

The roll gap set-up in the finishing mill is one of the most important technologies in the hot plate rolling process. As the target thickness can be obtained by the correct set-up of the roll gap, improving the roll gap set-up technology is very critical for plate thickness accuracy. The main cause of thickness variation in hot plate mills is the non-uniform temperature distribution along the length of the slab. The objective of this study is to adjust the roll gap set-up for the thickness accuracy of plate in hot rolling process considering top-end temperature drop. Therefore this study has concentrated on determining the correct amounts of roll gap to compensate thickness variation due to top-end temperature drop. The off-line simulation of compensated roil gap significantly decreases top-end thickness variation.

• 대한교통학회지
• /
• 제21권3호
• /
• pp.107-120
• /
• 2003

수십년동안 합류부 교통특성 및 현상을 다루는 많은 연구가 있어 왔지만 합류부 교통류를 평가하는 분석방법론은 그리 많이 개발되지 않았고 특히 합류용량에 대한 연구는 거의 이루어지지 않았었다. 본 연구는 합류부에서 강제합류를 포함한 합류용량을 확률적으로 결정하는 모형 개발을 목적으로 수행되었다. 고속도로 본선 바깥 차로의 시간차두간격 분포를 Erlang 분포로 가정하고 간격수락이론을 이용하여 합류용량 산정 모형식을 개발하였고, 이때 본선 차두간격이 임계간격보다 작은 경우 발생되는 강제합류 형태가 용량 산정식에 반영되었다. 또한. 합류용량 모형식에서 중요한 변수로 사용되는 임계간격을 결정하고자 연결로에서 진입하는 개별차량의 합류 행태를 조사하여 회귀분석을 통한 모형식을 구축하였다. 개발된 용량식을 토대로 합류용량 값들을 도로 및 교통 조건에 따라 제시하였는데 임계간격 크기가 커지고 연결로 진입교통량이 많아질수록 합류용량은 적게 산출되었다. 이러한 합류용량 값의 변화는 기존 HCM 방법에서 제시하고 있는 하나의 고정된 용량 값과는 다른 결과로 해석되고, 변화하는 합류용량 값은 앞으로 연결로 접속부 교통운영에서 고려해야 할 주요한 파라메타라고 생각된다.

• 대한교통학회지
• /
• 제4권2호
• /
• pp.3-14
• /
• 1986

This study was undertaken to develop the gap acceptance model of left-turn drivers on the major road at intersections. Typical unsignalized intersections on the two-lane and four-lane streets in Masan City were selected for the study intersection. For the gap distribution model, the lognormal, negative exponential, shifted negative exponential, and Gamma distributions were tested using the x2 and K-S tests. Based on the results for both streets, it was concluded that among the distributions tested the lognormal distribution represented the gap distribution best, followed by the shifted negative exponential distribution. Stochastic models of the gap-acceptance behavior of left-turn drivers on the major road at unsignalized intersections were programmed using SLAM Ⅱ, a simulation computer language. A stochastic model was selected for the gap-acceptance behavior to compare the results of the simulation with the observed data. The model assumes that a fixed critical acceptance gap is assigned to each left-turn driver based on a normal distribution and the gap distribution of the opposing traffic stream follows the shifted negative exponential distribution.