• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.27 no.5
• /
• pp.315-323
• /
• 2015

Damage level of coastal structures has been scaled up according to increase of wave height and duration of the storm due to the abnormal global climate change. So, the design criteria for new breakwaters is being intensified and structural strengthening is also conducted for the existing breakwaters. Recently, interlocking concept has been much attention to enhance the structural stability of the conventional caisson structure designed individually to resist waves. The interlocking caisson breakwater may be survival even if unusual high wave occurs because the maximum wave force may be reduced by phase lags among the wave forces acting on each caisson. In this study, the dispersion characteristics of wave forces using interlocking system that connect the upper part of caisson with cable in the normal direction of breakwater was investigated. A simplified linear model was developed for computational efficiency, in which the foundation and connection cables were modelled as linear springs, and caisson structures were assumed to be rigid. From numerical experiments, it can be found that the higher wave forces are transmitted through the cable as the angle of incident wave is larger, and the larger the stiffness of the interlocking cable makes larger wave dispersion effect.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.8
• /
• pp.8-14
• /
• 2019

Bird-strike is one of the most important design factors for safety in the aviation industry. Bird-strikes have been the cause of significant damage to aircraft and rotorcraft structures and the loss of life. This study used DYTRAN software to simulate the transient response of an Euler-Lagrangian composite helicopter blade that has been impacted by a bird. The Arbitrary Lagrangian Eulerian (ALE) method and a suitable equation of state were applied to model the bird. ALE was applied to the bird-strike analysis due to the large difference between the properties of the blade and bird. The debris of the bird was assumed to be a fluid and applied as Euler elements after the collision. Through the analysis of bird impacts, the leading-edge of the rotor blade (50.8 mm) was used to identify a positive margin of 1.18 based on the TSAI-FILL criteria. The results are assessed to be sufficiently reliable and may be evaluated to replace tests with various analysis conditions. The structural stability of the rotor blade could be assessed by applying various load conditions and different modeling methods in the future.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.11
• /
• pp.520-526
• /
• 2019

I-type girders are widely applied as very economical sections in plate girder bridges. There has been research on developing composite laminated panels, curved plates reinforced with closed-end ribs, and new forms of ribs and compression flanges for steel box girders. However, there is a limitation in analyzing the exact cause of local buckling caused by an I-type girder's webs. Therefore, an I-type girder's web was modeled using the finite element analysis program LUSAS 17.0 before and after reinforcement. We checked for the minimum thickness criteria presented in the Korea highway bridge design code, and the cause of buckling after performing a linear elastic buckling analysis of dead and live loads was analyzed. Before reinforcement, an eigenvalue (λ₁) at the 1st mode was 0.7025, the critical buckling load was smaller than the applied load, and there is a buckling. After reinforcement, when applying vertical and horizontal stiffeners to the web part of the girder at support, a Nodal line was formed, the eigenvalue was 1.5272, and buckling stability was secured. To improve buckling trace of the girder at the support, an additional plate was applied to the web at the support to ensure visual and structural safety, but buckling occurs at center of web. The eigenvalue (λ₁) was 3.5299, and this method is efficient for reinforcing the web of the support.

• Journal of Korean Society of Steel Construction
• /
• v.19 no.1
• /
• pp.29-41
• /
• 2007

Structural design, like other complex decision problems, involves many trade-offs among competing criteria. Although mathematical programming models are becoming increasingly realistic, they often have design limitations, that is, there are often relevant issues that cannot be easily captured. From the understanding of these limitations, a decision-support system is developed that can generate some useful alternatives as well as a single optimum value in the optimization of steel frame structures. The alternatives produced using this system are "good" with respect to modeled objectives, and yet are "different," and are often better, with respect to interesting objectives not present in the model. In this study, we created a decision-support system for designing the most cost-effective moment-resisting steel frame structures for resisting lateral loads without compromising overall stability. The proposed approach considers the cost of steel products and the cost of connections within the design process. This system makes use of an optimization formulation, which was modified to generate alternatives of optimum value, which is the result of the trade-off between the number of moment connections and total cost. This trade-off was achieved by reducing the number of moment connections and rearranging them, using the combination of analysis based on the LRFD code and optimization scheme based on genetic algorithms. To evaluate the usefulness of this system, the alternatives were examined with respect to various design aspects.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.19 no.1
• /
• pp.53-63
• /
• 2016

In this paper, we proposed the improvements for performance test and surveying equipment regulations, standards, methods and procedures, depending on the need of improving the legal system for surveying equipment in a diverse and sophisticated surveying industry. This research was performed first investigating the existing legal systems(Act on the establishment and management of spatial data, Framework act on national standards, ISO 17123, JIS B 7912) with respect to the surveying equipment performance testing and the research for IOS and KOLAS suggested the improvements on the application for the surveying equipment performance testing standard. More exactly, first, two years were presented for the surveying equipment performance testing cycle considering the precise accuracy of the instrument stability, purpose and frequency of use, etc. Second, the abolition of the measurement distance by grade and the upward or cross-grade adjustment of the single prism standards about the light wave rangefinder and total station were suggested for the improvement on survey equipment performance criteria. Third, since the main function of total station is focused on a three-dimensional coordinate measurement due to the improvement of surveying equipment performance testing, it was proposed to use the precision(repeatability) of the coordinate measuring method as an evaluation method.

• Journal of Food Hygiene and Safety
• /
• v.13 no.1
• /
• pp.24-28
• /
• 1998

Korean sesame oil mixed with corn oil and Chinese sesame oil were subjected to instrumental determination for fatty acid composition, sesaminol and sesamin contents, and induction period by AOM test to obtain basic data for ascertaining the truth of pure sesame oil, respectively. In sesame oil mixed with corn oil, stearic acid content of sesame oil containing above 20% corn oil was remarkably discriminated from that of pure sesame oil. Oleic and linoleic acid contents of sesame oil with 10% corn oil were significantly differnt from that of pure sesame oil. Stearicllinoleic acid ratio of sesame oil mixed with corn oil dcreased in proportion to corn oil content in sesame oil. Sesamolin and sesamin contents of sesame oil containing 30% corn oil were lower 18.3% and 21.0% than those of pure sesame oil, respectively. Induction periods of sesame oil by AOM were 8.14~9.24 hrs in Chinese sesame oil and sesame oils including 20% and 40% corn oils, but around 16hrs in Korean pure sesame oil. Based on the above results, it is considered that the comparisons of fatty acids, sesaminol and sesamin contents, and induction period by AOM test might be one of the potential criteria in discriminating between pure sesame oil and sesame oil mixed with corn oil.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.4
• /
• pp.248-258
• /
• 2020

In this study, an empirical analysis was performed with regards to traditional markets in Seoul, South Korea to find which physical maintenance elements, such as facility improvement for successful urban restoration, have greater effects on the expectation and activation awareness of successful urban restoration. This study targeted traditional markets located at the center of Seoul, which are visited by many domestic and international tourists as well as general consumers and are revitalizing the downtown area. A survey was conducted to collect a total of 515 completed questionnaires. Data analysis was performed using SPSS 23.0 and AMOS 22.0. The results of the analyses in this study indicate relevant urban invigoration factors (psychological, physical, diversity, functional, and stability factors), and it was observed that the expectation of urban regeneration was under the direct influence of the invigoration factors. Such a finding is meaningful in that it suggests a set of criteria to evaluate the concept of traditional markets in a comprehensive manner for successful urban regeneration while highlighting relevant invigoration factors for traditional marketplaces for the purpose of urban regeneration.

• Journal of The Korean Association of Information Education
• /
• v.23 no.2
• /
• pp.131-139
• /
• 2019

From 2019, software education has become a required subject for all elementary school students. However, many teachers are still unfamiliar with how the classes should be instructed. So this paper presented the meaning, detailed competencies and achievement standard in order to help in the collection, analysis and representation of data among the computational thinking that are key to software education. And it also suggested the applicability of the classes. The full course of the paper is summarized as follows. First, existing studies have summarized the meaning, detail and achievement standard of data related competencies. Based on this, a preliminary investigation was instructed. Pilot study carried out both FGI and closed questions at the same time. This was done in response to the survey's questionnaire reflecting the opinions of experts. Second, the results of the questionnaire generated as a result of the above were verified for validity, stability, and reliability among the PhD, PhD courses, software education teachers, and software education workers. Third, I developed and applied the five lessons as a class objective as 'Choosing collection method-Select the collection method according to the problem situation.', 'Searching for meaning of data-Understand what the analyzed data mean..', 'Using various expression methods-Use a variety of expression tools.' using the backward design model to integrate education, class, and assessment. As a result, the detailed competencies of data collection, analysis, and representation and achievement standard were presented. This may help in setting specific and specific criteria for what direction classes are recommended when planning data-related classes in elementary schools.

• Korean Journal of Soil Science and Fertilizer
• /
• v.31 no.2
• /
• pp.183-188
• /
• 1998

Changes of chemical and physical properties of the butchery waste compost were assessed when the wastepaper was used as a bulking agent (BP). Temperature of compost, with frequent turnover, was increased up to $83^{\circ}C$ even during the winter. Canon exchange capacity of the compost was increased with composting time, but pH, water content, total carbon, total nitrogen, C/N ratio and salt concentration were decreased to the extents showing a convergency. Heavy metal contents of BP-192 were lower than the standard criteria. Germination rate of cucumber seed, when BP-34 and BP-96 composts were applied more than 15 g, was under 40%, but those of BP-143 and BP-192 were 100%, irrespective of the amounts of compost used. The C/N ratio of the matured compost was 8.6. Results indicated that wastepaper might be employed as a bulking agent for butchery wastes composting.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.3
• /
• pp.677-683
• /
• 2016

In urban areas, underground tunnel construction sites have spread widely to accommodate rapidly increasing traffic volume along with a high-degree economic growth. Earth tunneling might be adapted frequently for the underground space securing, and various tunneling methods have been developed to stabilize the tunnel face and crown. Among them, the DSM (divided shield method) is gaining popularity for its enhanced stability and construction efficiency. This method has its foundation from the Messer Shield method, which is one of the trenchless special tunneling methods. This study examined the effects of face reinforcement on construction the sequence through a large scale soil chamber test and numerical analyses. The chamber has a size of a 1/2 scale of the real tunnel. Surface settlements were measured according the tunneling process. Commercially available software, MIDAS GTS, was used for numerical analysis and its result was compared with the values obtained from the chamber test. The results of the study show that both settlements of the embanked soils and the stress of the tunnel girder are located within the safe criteria. Overall, this study provides basic data and the potential of using a reinforced tunnel face to enhance DSM applications.