• 한국광물학회지
• /
• 제11권1호
• /
• pp.32-44
• /
• 1998

The transformation sequence of kaolinite to mullite is examined with new electron diffraction data obtained mainly by an energy filtering transmission electron microscope. Kaolinite is transformed finally into mullite and cristobalite through several steps of continuous reactions by heating, which result in metakaolinite, microcrystalline spinel-type phase and amorphous silica. Metakaolinite maintains a short-range order in its structure ven at $920^{\circ}C$. Spinel phase results from a topotactictransformation of metakaolinite apart from the breakdown of metakaolinite structure. the first strong exothermic peak on DTA curve is mainly due to the extraction of amorphous silica from metakaolinite and the gradual nucleation of mullite. Metakaolinite decomposes around$ 940^{\circ}C$ to mullite that doesn't show a clear crystallographic relationship to the parent metakaolinite structure. However, spinel phase produced previously is maintained. The initially formed spinel and mullite phases are suggested to be Al-rich, but progressively gain Si in their structures at higher temperatures. Spinel phase decomposes completely through a second weak exothermic reaction promoting the growth of mullite, and crystallization of amorphous silica to cristobalite.

• 한국광물학회지
• /
• 제23권3호
• /
• pp.267-272
• /
• 2010

${\alpha}$-크리스토발라이트 구조의 $GaPO_4$에 대한 고압 x-선 회절 실험을 상온에서 8.9 GPa까지 시행하였다. 정방정계에 속하는 출발결정구조는 1 GPa 이하의 압력에서 회절피크가 분리되는 변화를 보이는데, 아마도 망상구조를 이루고 있는 사면체의 방향성이 압력에 의해 흐트러지면서 상-I'로 상변이가 유도된 것 같다. 압력을 증가시키면, 상-I'는 2 GPa와 3 GPa 사이에서 정방정계에 속하는 고압상(상-III)으로 상변이를 하고 있다. 이 결과는 최근 동일한 시료를 이용하여 얻은 고압실험결과(Ming et al., 2007)와 일치하지 않는다. 최고압력에 도달한 다음, 압력을 대기압으로 내리면 상-III이 그대로 유지되는 것으로 나타났다.

• 대한기계학회논문집A
• /
• 제40권9호
• /
• pp.827-833
• /
• 2016

와이어 직조 Kagome는 와이어로 직조된 Periodic Cellular Metal의 일종으로서 Kagome 구조로 이루어져 있다. 와이어 직조 Kagome는 무게 대비 높은 강도와 강성을 가지면서 대량 생산에도 큰 가능성을 가지는 것으로 알려졌다. 본 연구에서는 ${\alpha}$-cristobalite 구조적 특성을 모사하여 음의 푸아송비를 갖는 새로운 직조 구조체를 개발하였다. 와이어 직조 Kagome를 제작한 후 사면체 단위셀 부분을 강구와Epoxy를 이용하여 채우고, 초기 변형을 주어 시편을 제작하였다. 또한 FEA 시뮬레이션을 통해 제작 가능성을 확인하고, 실제 제작한 구조체를 대상으로 기계적 특성을 연구하였다.

• 한국결정성장학회지
• /
• 제32권3호
• /
• pp.115-120
• /
• 2022

반도체 웨이퍼용 실리콘 잉곳 제조과정에서 사용되는 석영유리 도가니 내측표면의brownish ring (BR)에 대해 연구하였다. BR의 크기는 20~30 ㎛이고 비대칭 갈색 고리형태이다. 도가니 위치에 따라 BR의 크기와 분포가 상이하며, Si 잉곳 성장시 도가니 온도가 가장 높은 round 부가 가장 크고 많았다. BR은 석영유리보다 열팽창계수가 큰 cristobalite를 함유하고 있어 표면 crack이 나타나는 것으로 판단된다. BR의 발색 현상과 p in hole은 산소 결손에 의한 것으로 생각된다.

• 한국세라믹학회지
• /
• 제15권2호
• /
• pp.59-65
• /
• 1978

Some compounds with tetrahedral framework structures are synthetized and the general methods of synthesis are discussed. There exist tridymite-, cristobalite-, Icmm-, Immm-, beryllonite-, feldspar-, and paracelsian-structure type in the gropu of compounds. Their lattice constants and space groups are summarized and given in a table.

• 보존과학연구
• /
• 통권22호
• /
• pp.53-79
• /
• 2001

The scientific analysis and provenance study of potteries excavated from kiln site at Gyeongsang Nam-do were carried out using XRD, ICP-AES and NAA. We can summary the following Result :1. As a result of XRD analysis, it showed that soft potteries consisted of quartz, feldspar and clay minerals while hard potteries consisted of high temperature crystals such as mullite, tridymite, cristobalite.In case of firing temperature which are determined by XRD, potteries consisted of quartz, feldspar and clay mineral had very low firing temperature. While potteries having only cristobalite ranged above $1200^{\circ}C$.2. As a result of correlation analysis using trace element, the selected characteristic elements which was able to distinguish from each kiln site was Sm, Cs, Sc, Eu, Hf.3. Discriminant analytical showed that each kiln site were classified into 4-gruops;Kimhaeci Daesungdong, Hamangun Myosari, Changyounggun Yochori and one group mixed KimhaeciGuosandong, Kimhaeci Samgyeri. This suggests that there are no correlations between the raw materials used in each kiln sites except Kimhaeci Guosandong, Kimhaeci Samgyeri.

• 한국결정성장학회지
• /
• 제30권1호
• /
• pp.27-32
• /
• 2020

점토, 규석, 장석을 사용하여 만든 전통생활도자기는 주 결정상이 mullite와 cristobalite이다. Mullite 결정은 제품의 강도를 좋게 하지만 열팽창계수가 5.3 × 10^-6/℃로 비교적 커서 내열 도자기로는 사용할 수 없다. 본 연구에서는 산청토와 장수곱돌 sludge를 사용하여 도자기 내에 mullite 결정 대신 열팽창 계수가 2.6 × 10^-6/℃인 cordierite 결정이 생성되게 함으로써 가벼운 내열 도자기를 개발하고자 하였다. 그 결과 산청토 80 wt%, 장수곱돌 sludge 20 wt%를 사용하여 만든 도자기가 내열성이 좋고 강도와 하중연화도 우수하였으며, 부피비중도 1.7 8로 기존의 분청사기보다 가벼웠다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 춘계학술대회 논문집 유기절연재료 방전 플라즈마연구회
• /
• pp.85-88
• /
• 2003

In this study, porcelain insulator samples which have a different alumina composition were manufactured in order to test electrical and mechanical properties and make an analysis of the propagation phenomena of micro cracks on porcelain body. From XRD quantitative analysis the crystalline phases were different with alumina composition, sample C and D which have about 17wt% Corundum phase without the Cristobalite phase shows better electrical and mechanical properties than sample A and 8 which have the Cristobalite phase. In dielectrics test on porcelain samples with below 17wt% alumina composition, it was found that the amount of glass phase$(SiO_2)$have an main effect to decrease the dielectric loss$(tan{\delta})$, and the dielectric breakdown voltage of aluminous porcelain insulators was largely affected by its relative density. As a micro cracks analysis, HRS were measured, then the intensity of HRS increased with the amount of alumina composition. On the other hand, the propagation behaviors of cracks was fairly influenced by the distribution of pores.

• 한국전기전자재료학회논문지
• /
• 제17권3호
• /
• pp.353-359
• /
• 2004

In this study. porcelain insulator samples which have a different alumina composition were manufactured in order to test electrical and mechanical properties and make an analysis of the propagation phenomena of micro cracks on porcelain body. From XRD quantitative analysis the crystalline phases were different with alumina composition, sample C and D which have about l7wt％ Corundum phase without the Cristobalite phase shows better electrical and mechanical properties than sample A and B which have the Cristobalite phase. In dielectrics test on porcelain samples with below l7wt％ alumina composition, it was found that the amount of glass phase(SiO$_2$) have an main effect to decrease the dielectric loss(tan$\delta$), and the dielectric breakdown voltage of aluminous porcelain insulators was largely affected by its relative density. As a micro tracks analysis, HRB were measured, then the intensity of HRB increased with the amount of alumina composition. On the other hand, the propagation behaviors of cracks was fairly influenced by the distribution of pores.

• 한국세라믹학회지
• /
• 제22권3호
• /
• pp.72-76
• /
• 1985

Single crystals of the compound MeI $(LiMoO_4)$ and $Me^I(LiWO_4)$ ($Me^I=K$, Rb, Cs) were synthesized by slow evaporation from aqueous solution and bycooling from melt. The compounds of potassium or rubidium are hygroscopic and they form easily hydrated crystals $Me^I LiMoO_4$.$H_2O$ or $Me^ILiMoO_4$.$H_2O$ or $Me^ILiWO_4$.$H_2O$ from aqueous solution. The structures of these hydrated crystals are each other isotypic and they are built up of distorted layers of $(LiMoO_5)$ or $(LiWO_5)$. There exist two types of tetrahedral framework structures in this group of anhydrous molybdates and tung-states ; tridymite-type and cristobalite-type. $KLiMoO_4$ and $KLiWO_4$ have two types of polymorphic structures where as only the cristobalite-type is found in the Rb-and Cs-compounds. The system $KLiSO_4-KLiMoO_4$ was studied. Two components are almost immiscible but there eixst a narrow area of solid solution on the side of sulfate in the system.