• KCI Concrete Journal
• /
• 제12권2호
• /
• pp.55-72
• /
• 2000

This paper proposes a mechanical model to describe the load-deformation responses of the reinforced concrete plate members under service load state. An Analytical method is introduced on the basis of the rotating crack model which considers equilibrium, compatibility conditions, load-strain relationship of cracked member, and constitutive law for materials. The tension stiffening effect in reinforced concrete structures is taken into account by the average tensile stress-strain relationship from the load-strain relationship for the cracked member and the constitutive law for material. The strain compatibility is used to find out the crack direction because the crack direction is an unknown variable in the equilibrium and compatibility conditions. The proposed theory is verified by the numerous experimental data such as the crack direction, moment-steel strain relationship, moment-crack width relationship. The present paper can provide some basis for the provision of the definition of serviceability for plate structures of which reinforcements are deviated from the principal stresses, because the present code defines the serviceability by the deflection, crack control, vibration and fatigue basically for the skeletal members. The proposed theory is applicable to predict the service load state behavior of a variety of reinforced concrete plate structures such as skew slab bridges, the deck of skew girder bridges.

• Smart Structures and Systems
• /
• 제33권2호
• /
• pp.105-118
• /
• 2024

In order to realize tiny bridge crack discovery by UAV-based machine vision, a novel method combining deep learning and tensor voting is proposed. Firstly, the grid images of crack are detected and descripted based on SE-ResNet50 to generate feature points. Then, the probability significance map of crack image is calculated by tensor voting with feature points, which can define the direction and region of crack. Further, the crack detection anchor box is formed by non-maximum suppression from the probability significance map, which can improve the robustness of tiny crack detection. Finally, a case study is carried out to demonstrate the effectiveness of the proposed method in the Xiangjiang-River bridge inspection. Compared with the original tensor voting algorithm, the proposed method has higher accuracy in the situation of only 1-2 pixels width crack and the existence of edge blur, crack discontinuity, which is suitable for UAV-based bridge crack discovery.

• KIEAE Journal
• /
• 제7권3호
• /
• pp.89-96
• /
• 2007

The purpose of this experimental study is to investigate the compressive strength, shear strength, bending strength, and crack control by the mixture of the hwang-toh. The size of compressive specimens is $200{\times}200{\times}400(mm)$, and the size of shear, bending specimens is $200{\times}200{\times}600(mm)$. Finally, crack control specimens for comparative comparison is $200{\times}200{\times}15(mm)$. The mixture of the hwang-toh is as follows; Hwangtoh( H)+Water(W), H+W+Sand(S), H+W+S+sTraw(0.5%), H+W+S+sT(1.0%). The actual height, width, and the length are measured at the center of all specimens. The main parameters are mixture ratio of hwang-toh, straw and age of specimens. The test results are as follows. (1) The compressive strength is linearly increased until 15 weeks according to specimen ages. (2) About crack control, the specimen added in 1% straw is the most effective.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 봄 학술발표회 논문집
• /
• pp.118-121
• /
• 2000

CFRD (Concrete Faced Rockfill Dam) face slab concrete has a much capability to occur crack due to drying shrinkage, hydration heat and bas compaction etc. Because of crack of concrete induce structural problem and decrease durability of concrete, it is need to reduce crack of concrete. This is an experimental study to analyze the Control Property of Plastic Shrinkage Crack for CFRD face slab concrete. For this purpose, it was investigated and analyzed the engineering properties of plain concrete and using admixtures (polypropylene fiber, fly-ash) according to test result As the result, it was found that crack width and area of concrete using admixtures less than of plain concrete.

• International Journal of Concrete Structures and Materials
• /
• 제18권3E호
• /
• pp.207-211
• /
• 2006

This paper presents an experimental study on the repair performance of sprayed engineered cementitious composites(ECC) serving as a repair material. Sprayable ECC, which exhibit tensile strain-hardening behavior in the hardened state and maintain sprayable properties in the fresh state, have been developed by using a parallel control of micromechanical design and rheological process design. The effectiveness of sprayable ECC in providing durable repaired structures was assessed by spraying the ECC and testing them for the assessment. The experimental results revealed that, when sprayed ECC were used as a repair material, both load carrying capacity and ductility represented by the deformation capacity at peak load of the repaired flexural beams were obviously increased compared to those of commercial prepackaged mortar(PM) repaired beams. The significant enhancement in the energy absorption capacity and tight crack width control of the ECC repair system treated with wet-mix spraying process suggests that sprayed ECC can be effective in extending the service life of rehabilitated infrastructures.

• 한국산학기술학회논문지
• /
• 제19권12호
• /
• pp.694-701
• /
• 2018

FRP-보강근 콘크리트 부재들은 FRP-보강근이 철근에 비해 낮은 탄성계수와 부착강도를 갖고 있어 철근콘크리트 부재에 비해 과도한 균열폭의 가능성이 클 수 있다. 따라서 외국의 기준들에서는 FRP-보강근 콘크리트 부재의 균열제어를 위하여 허용균열폭의 제한규정을 두고 있는데, ACI 440.1R-15 설계지침에서는 최대 보강근 간격으로 제어하는 간접적인 방법으로 제안하고 있다. 그러나 제안식은 아직까지 장기하중이 균열폭에 미치는 시간종속적인 효과를 반영하지 못하고 있다. 이에 본 연구에서는 장방형단면뿐만 아니라 T형단면의 FRP-보강근 콘크리트 보를 대상으로 장기실험을 통하여 얻어진 실험결과를 바탕으로 단면형태별 균열폭 특성을 구분하여 파악하므로 써 장기균열폭 예측모델을 제안하는데 필요한 기초자료를 제공하고자 하였다. 따라서 단면형태별로 각각 한 개씩 의 철근콘크리트 비교시험체를 포함한 4개의 장방형보와 4개의 T형 보로 구성된 총 8개의 시험체를 제작하여 시공하중의 영향을 고려한 1년간 4점 가력 장기휨실험을 수행하였다. 결과로서 시간종속적인 영향을 받는 순수장기균열폭은 철근 시험체에 비해 보강근의 탄성계수가 낮은 GFRP나 AFRP-보강근 시험체에서는 2.6~3.0배 증가하였으나 CFRP-보강근 시험체에서는 1.1~1.4배 증가에 그쳤다. 또한 즉시균열폭을 포함한 총장기균열폭은 장방형단면과 T형단면 시험체에서 평균적으로 각각 즉시균열폭의 약 2.4와 3.1배 증가를 보여주어 보수적으로 각각 2.5와 3.5의 시간종속계수를 구분하여 제안하였다.

• 콘크리트학회논문집
• /
• 제24권4호
• /
• pp.381-390
• /
• 2012

콘크리트구조설계기준(2003, 2007)의 균열제어방법이 어떠한 연구들에 근거를 두어 제시되었는지 그 발달과정을 검토하였다. 이러한 과정들을 근거로 현행 구조기준의 균열제어방법에 어떠한 문제점들이 발생할 수 있으며 이를 해결하기 위해서는 어떻게 하여야 하는지 제안하였다. 제시한 새로운 균열제어식은 간단하면서도 명확하고 기존의 규정들과 충돌하지 않아 실무자들에게 발생할 수 있는 논란의 여지를 종식시킬 수 있을 것이다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 봄 학술발표회 논문집
• /
• pp.23-28
• /
• 2002

This paper reports the performance results of hydration heat control of mass concrete walls with pipe cooling system. The thickness of walls ranged from 0.9 to 2.2m. In order to investigate the effect of pipe cooling on the thermal and thermal crack characteristics, the pipe cooling was conducted for 42 walls, and the investigation of thermal cracks was conducted for 14 walls. Based on the investigation, the pipe cooling method decreased the peak temperature of about 13-2$0^{\circ}C$ and the thermal crack width of about 30% for mass concrete walls.

• 대한토목학회논문집
• /
• 제36권5호
• /
• pp.747-756
• /
• 2016

이 논문에서는 프리캐스트로 제작된 아치 구조의 연결을 위한 루프 이음 상세를 제안하였다. 설계기준에서 제시하고 있는 루프 이음 상세의 요구사항을 만족하는 경우와 시공성을 개선하기 위한 상세 대안들에 대한 평가를 위한 실험적 연구를 수행하였다. 설계 요구사항을 만족하는 경우에는 프리캐스트 아치 실험체가 현장타설 일체형 부재에 비해서 높은 내하력을 나타내었다. 아치구조의 크라운 부위에서의 균열은 초기 균열 발생 이후 증가되는 압축력 효과로 인해서 0.2 mm를 초과하지 않는 균열폭이 발생하였다. 초기 균열 제어에 노치부의 와이어메쉬 보강이 효과를 보였고 철근 커플러와 확대머리철근을 이용한 연결부 상세도 기준 부재 이상의 내하력을 나타내었다. 시공성 개선 상세의 경우 구조적 거동에 차이를 보이지 않아서 작업자의 배근 시공성을 개선할 수 있을 것으로 판단된다. 루프철근의 내면 반지름과 겹침 이음 길이는 현재의 설계기준의 요구사항을 만족시키지 않으면 균열폭 제어 측면에서 좋지 않은 결과를 나타내었다.

• 콘크리트학회지
• /
• 제9권3호
• /
• pp.24-33
• /
• 1997