• 대한토목학회논문집
• /
• 제30권4A호
• /
• pp.383-389
• /
• 2010

현재 우리나라의 콘크리트구조설계기준은 강도설계법에 근간하고 있다. 강도설계법에 의해 휨부재를 설계할 경우, 콘크리트 응력-변형률 관계는 사용하중 상태에서 선형으로 가정하지만 이후 극한한계 상태까지에 대해서는 규정되어 있지 않다. 이로 인해 콘크리트구조설계기준에서는 처짐 및 균열폭 등의 산정에 대해 개별적인 규정을 두고 있다. 그러나 한계상태설계법에 근거한 EC에서는 재료에 대한 응력-변형률 관계를 규정하고 있다. 따라서 재료의 응력-변형률 관계로부터 휨강도 및 처짐 등을 직접 계산할 수 있다. 본 연구에서는 휨부재에 대하여 주어진 재료 모델을 바탕으로 평형방정식과 적합조건식을 적용하여 휨모멘트-곡률 관계를 계산하였다. 이로부터 휨강도 및 처짐을 산정하여 현행 콘크리트구조설계기준에 의한 값과 비교하였다. 해석 결과 재료 모델로부터 휨모멘트-곡률 관계를 통해 산정된 처짐은 실험 결과와도 비교적 잘 일치하고, 항복 이후의 처짐 계산도 가능한 것으로 나타났다.

• Advances in concrete construction
• /
• 제16권3호
• /
• pp.127-139
• /
• 2023

In this study, the steel fiber and the polypropylene fiber were used to enhance the mechanical properties of fully recycled coarse aggregate concrete. Natural crushed stone was replaced with recycled coarse aggregate at 100% by volume. The steel fiber and polypropylene fiber were used as additive material by incorporating into the mixture. In this test two parameters were considered: (a) steel fiber volume ratio (i.e., 0%, 1%, 1.5%, 2%), (b) polypropylene fiber volume ratio (i.e., 0%, 0.1%, 0.15%, 0.2%). The results showed that compared with no fiber, the integrity of cubes or cylinders mixed with fibers after failure was better. When the volume ratio of steel fiber was 1~2%, the width of mid-span crack after flexural failure was 5~8 mm. In addition, when the volume ratio of polypropylene fiber was 0.15%, with the increase of steel fiber content, the static elastic modulus and toughness of axial compression first increased and then decreased, and the flexural strength increased, with a range of 6.5%~20.3%. Besides, when the volume ratio of steel fiber was 1.5%, with the increase of polypropylene fiber content, the static elastic modulus decreased, with a range of 7.0%~10.5%. The ratio of axial compression toughness first increased and then decreased, with a range of 2.2%~8.7%. The flexural strength decreased, with a range of 2.7%~12.6%. On the other hand, the calculation formula of static elastic modulus and cube compressive strength of fully recycled coarse aggregate with steel-polypropylene fiber was fitted, and the optimal fiber content within the scope of the test were put forward.