• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 학회창립 10주년 기념 1999년도 가을 학술발표회 논문집
• /
• pp.377-380
• /
• 1999

This paper dscribes an experimental investigation into the cause of flexural-shear failure in RC beams. The experimental variables are bottom flange width and tension bar location. Then these test results were compared and analyzed to deduce the major cause of critical-shear cracking. As a result, it was found that the propagation of the critical shear crack depended exclusively on the intensity of horizontal cracking.

• 대한기계학회논문집
• /
• 제5권2호
• /
• pp.94-100
• /
• 1981

McClintock 와 Walsh 의 개념을 발전시키므로써 2차와 3차계에서의 열적 기계적 파괴 기준식을 구하였다. Griffith Theory 와 파괴역학에 기초를 두고서 전개된 응력세기 인수로만 표기된 2차와 3차계의 파괴기준식은 동일한 관계식 즉, ( $k_{2}$/ $k_{2c}$ )$^{2}$+ $k_{1}$/ $k_{1c}$ =1로 표시된다는 것을 보였다. 3차계에서 열적 기계적 하중하에서 응역세기 인수에 관한 일반식을 Crack 의 닫힘을 고려하여 유도하였다.

• 대한기계학회논문집
• /
• 제5권3호
• /
• pp.193-198
• /
• 1981

Muskhelishvili 의 복소수방법에 의해 일반적 하중 즉 열 및 기계적 하중을 받는 무한 탄성체내에 공동을 가정하고 그 주위의 응력 및 변위를 유도하였다. 선형트랙(line rack)이 부분적으로 또는 완정히 닫힐 임계하중조건과 그때의 응력세기 계수 (stress intensity factor)를 McClintork와 Walsh 의 크랙닫힘에 관한 결정에 기초를 두고 해석학적으로 유도하였다.

• 대한기계학회논문집
• /
• 제15권5호
• /
• pp.1433-1438
• /
• 1991

본 연구에서는 팔렛을 갖는 유한폭 변후판재 내의 모드 Ⅰ균열에 대하여 3차 원 유한요소법으로 응력확대계수를 수치해석하였다.

• Structural Engineering and Mechanics
• /
• 제6권4호
• /
• pp.467-471
• /
• 1998

A mathematical model is developed to predict the fatigue notch factor of butt welds subject to number of parameters such as weld geometry, residual stresses under dynamic combined loading conditions (tensile and bending). Linear elastic fracture mechanics, finite element analysis, dimensional analysis and superposition approaches are used for the modelling. The predicted results are in good agreement with the available experimental data. As a result, scatters of the fatigue data can be significantly reduced by plotting S-N curve as ($S{\cdot}K_f$) vs. N.

• Structural Engineering and Mechanics
• /
• 제3권1호
• /
• pp.1-10
• /
• 1995

This study presents a methodology for the system reliability analysis of cracked structures with random material properties, which are modeled as random fields, and crack geometry under random static loads. The finite element method provides the computational framework to obtain the stress intensity solutions, and the first-order reliability method provides the basis for modeling and analysis of uncertainties. The ultimate structural system reliability is effectively evaluated by the stable configuration approach. Numerical examples are given for the case of random fracture toughness and load.

• 한국강구조학회 논문집
• /
• 제12권2호통권45호
• /
• pp.111-122
• /
• 2000

이 연구에서는 덮개판 형상이 피로특성에 미치는 영향을 정량적으로 평가하기 위해서 강교량을 구성하는 구조세목 중 덮개판 필렛용접부를 대상으로 일련의 피로실험을 실시하였다. 피로실험결과 덮개판 형상에 따라 피로강도에 다소 차이를 나타내고 있었으나 국내 및 외국의 피로설계기준을 만족함을 알 수 있었다. 또한 비치마크실험결과로부터 피로균열 발생점은 용접지단부의 형상에 밀접하게 관련되어 있음을 확인할 수 있었으며, 용접지단부의 여러 곳에서 동시다발적으로 발생한 피로균열이 반타원형의 표면균열의 형태로 성장하고 이 균열이 서로 합체되어 관통균열의 형태로 성장함으로써 결국 파단에 이르렀다. 한편, 파괴역학적 해석결과로부터 기존의 제안식 및 유한요소해석에서 구한 균열보정 계수 중기하학적형상보정계수가 가장 지배적임을 알 수 있었으며, 피로균열성장속도와 유한요소해석에서 구한 응력확대계수범위 사이의 관계로부터 덮개판 필렛용접부의 피로수명을 산정 할 수 있었다.

• 대한기계학회논문집A
• /
• 제25권7호
• /
• pp.1139-1146
• /
• 2001

The reactor pressure vessel(RPV) is usually cladded with stainless steel to prevent corrosion and radiation embrittlement, and a number of subclad cracks have been found during an in-service-inspection. These subclad cracks should be assured for a safe operation under normal conditions and faulted conditions such as pressurized thermal shock(PTS). Currently available integrity assessment procedure for an RPV, ASME Code Sec. XI, are built on the basis of linear fracture mechanics (LEFM). In PTS condition, however, thermal stress and mechanical stress give rise to high tensile stress at the cladding and elastic-plastic behavior is expected in this area. Therfore, ASME Code Sec. XI is overly conservative in assessing the structural integrity under PTS condition. In this paper, the fracture parameter (stress intensity factor, K, and RT(sub)NDT) from elastic analysis using ASME Sec. XI and finite element method were validated against 3-D elastic-plastic finite element analyses. The difference between elastic and elastic-plastic analysis became significant with increasing crack depth. Therfore, it is recommended to perform elastic-plastic analysis for the accurate assessment of subclad cracks under TPS which causes plastic deformation at the cladding.

• Structural Engineering and Mechanics
• /
• 제68권6호
• /
• pp.747-760
• /
• 2018

In the present study, a methodology for developing fragilities of arch concrete dams to assess their performance against seismic hazards is introduced. Firstly, the probability risk and fragility curves are presented, followed by implementation and representation of the way this method is used. Amirkabir arch concrete dam was subjected to non-linear dynamic analyses. A modified three dimensional rotating smeared crack model was used to take the nonlinear behavior of mass concrete into account. The proposed model considers major characteristics of mass concrete. These characteristics are pre-softening behavior, softening initiation criteria, fracture energy conservation, suitable damping mechanism and strain rate effect. In the present analysis, complete fluid-structure interaction is included to account for appropriate fluid compressibility and absorptive reservoir boundary conditions. In this study, the Amirkabir arch concrete dam is subjected to a set of 8 three-component earthquakes each scaled to 10 increasing intensity levels. Using proposed nonlinear smeared crack model, nonlinear analysis is performed where the structure is subjected to a large set of scaled and un-scaled ground motions and the maximum responses are extracted for each one and plotted. Based on the results, fragility curves were plotted according to various and possible damages indexes. Discrete damage probabilities were calculated using statistical methods for each considered performance level and incremental nonlinear analysis. Then, fragility curves were constructed based on the lognormal distribution assumption. Two damage indexes were introduced and compared to one another. The results indicate that the dam has a proper stability under earthquake conditions at MCE level. Moreover, displacement damages index is more conservative and impractical in the fragility analysis than tensional damage index.

• 대한조선학회논문집
• /
• 제60권4호
• /
• pp.213-221
• /
• 2023

The demand for Liquefied Natural Gas (LNG) carriers and LNG-fueled ships has significantly increased in recent years due to the sulfur-oxide emission regulations by the International Maritime Organization (IMO). The main goal of this paper is to introduce the process for the Engineering Critical Assessment (ECA) of IMO independent type-B cargo tanks made from 9% nickel alloy. A methodology proposed by the British Standard was used to conduct ECA for any structure with initial flaws. Based on this standard, a Matlab code was developed to perform ECA. Coarse mesh Finite Element Analysis (FEA) was performed on an independent type-B LNG cargo tank with a capacity of 15,000 m³. The location with the highest development of maximum principal stress was identified at the bottom of the cargo tank. Fine mesh FEA was performed to obtain the stress range required for ECA. The dynamic cargo tank loads used for FEA were determined using some ship rules presented by Det Norske Veritas. As a result of performing a 20-year long-term crack propagation analysis with a semi-elliptical surface crack, the fracture-to-yield ratio exceeded the Fracture Assessment Line (FAL) and some structural reinforcement was necessary. Performing a 15-day short-term crack propagation analysis, the fracture-to-yield ratio remained within the FAL, and no significant LNG leaks were expected. This paper is believed to provide a guide for performing ECA of LNG cargo tanks in the future by providing the basic theory and application sample necessary to perform ECA.