• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.49 no.2
• /
• pp.46-54
• /
• 2012

We propose a continuously varying contact pressure(CVCP)-adaptive feature extraction algorithm for pulse diagnostic analysis. The CVCP method measures the pulse waveform with continuously increasing contact pressure(CP). This method offer a high resolution signal of the pulse waveform amplitude(PWA) as a function of the contact pressure. Therefore it enables us to overcome the limitation of commercially available pulse-taking devices whose analysis rely on a few number of PWA-CP pairs. We show that an efficient feature extraction algorithm which covers the features of the CVCP-method can be developed by sequentially applying Fast Fourier Transform, peak detection by center-to-edges method, baseline drift removal, detection of the percussion wave upstroke by intersecting tangent method and detection of the analysis region. Finally, by a clinical study with 30 subjects, we show that our CVCP-adaptive feature extraction algorithm detected the upstroke with accuracy of 99.46% and sensitivity of 99.51%, which were about 4.82% and 2.46% increases respectively, compared to a conventional feature extraction method. The proposed CVCP method and the CVCP-adaptive feature extraction algorithm are expected to improve the accuracy in the pulse diagnostic algorithms such as floating/sunken pulse qualities and deficient/excess pulse qualities.

• Journal of the Ergonomics Society of Korea
• /
• v.31 no.3
• /
• pp.445-453
• /
• 2012

The aim of this paper was to prove that if the risk level in combined tasks was improved through evaluation of postural load of liquid weight measurement process, the workload level and ratio of exposure time would be changed, and the time of process would be seen concurrently. Background: According to results of epidemiological studies conducted by Korea Occupational Safety & Health Agency, 122 musculoskeletal disorders occurred during 1992 to 2008, in which manufacturing industry covers 96(78.7%) of total. However, this is an insufficient level and only occupies 39% based on the South Korea's manufacturing standard industrial classification(246 industries). Method: Firstly, the number of batches weighed on one day(460min) was investigated based on the work performed and Weight measured weekly. VCR recording was taken based on the level of liquid ingredients prescribed for 1batch using the Camcorder. After dividing a 356 sec video into 1 sec using the screen capture function in Gom player, the job classification was performed by analyzing the change of working postures, which revealed 148 working postures. Time measurement was decided by time of the postures was being maintained. Then, the REBA analysis was performed for the working postures. The ratio of Exposure time was calculated based on the measurement time and REBA Score. In addition, the recommendations were designed and implementation was carried out for the working postures with REBA Score higher than 3. Finally, after the intervention, REBA measurement, time measurement, and ratio of exposure time were calculated for the comparison of works before and after improvement. Results: The number of work elements was decreased by 30.4% from 148 to 103 after improvement. The results of time measurement showed that the time was reduced by 46.3% from 356 sec to 191 sec. And the ratio of exposure time was also improved by 52.1% from 0% to 52.1% after improvement. Conclusion: The reduction of time was found to improve the productivity of management. Furthermore, because the reduction of ratio of exposure time and the improvement of workload level are the improvement of discomfort, it would contribute to the improvement of the worker's psychological working posture. Application: These results would contribute to musculoskeletal disease prevention and management performance. Further studies for other industries would be needed based on this case study.

• Archives of design research
• /
• v.15 no.2
• /
• pp.91-100
• /
• 2002

Unlike a study related in language alone, rhetorical study of current time, composed with multi-culture, medias, communication, presents its own field that covers from the form of discourse(persuasive) to another form of discourse(not persuasive). If there was a study of making beautiful sentences for story and finding simple method of speech in Greek and roman period of an ancient time, it now a study in which one finds the essence of literary style or terminology in the expression of sentence. The taller case is especially important, given that the importance of what to express visually is on-going active procedure of this stuffy as itself an activity of communication. When a visual object persuades viewers, the activity of communication derives them to react and to understand the intention of an artist. The matter of how to speak is the matter of how to shape message persuasively. This persuasive method or technique is study of rhetoric. The three aspects (figurative, accentuating, mutating) of rhetorical expression of an illustration, the visual image can give fresh feelings to be in intimate relations with public. These rhetorical expressions also vitalize the story that is expressed on illustration with crisp image. It helps to attain expected effects while discovering essential meaning through the corresponding linguistic interpretation of an image. The study aims at the most effective way to communicate by figuring the most strong and direct illustrative message out. One of the method is to patternize illustrative expressions that are established from all kinds of shapes of Rhetoric. Therefore ,an operation of significance and an implication can shape an ultimate goal of this study from acknowledging the mechanism that modern illustration embraces.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.8 no.1
• /
• pp.1-23
• /
• 1998

Work-related Low Back Pain(LBP) is one of tile most important Issues in the field of industrial safety and health. Particularly, manual lifting is known as a major cause of work-related LBP and impairment. Total number of 163 manual lifting tasks in motor assembly processes were investigated. The 1981 and the 1994 equations developed by National Institute for Occupational Safety and Health(NIOSH) were applied to evaluate potential hazards of lifting-related LBP. Comparisons between the 19R I and 1994 NIOSH criteria were made. The relationships between the NIOSH criteria and lifting-related LBP were also analyzed. The results of this study are as follows: 1. The values of Action Limit(AL) by the NIOSH 1981 lifting equation. Recommended Weight Limit(RWL) by the 1994 equation and the weight of the load handled at each manual lifting task were shown log-normal distributions. 2. LI'(the weight of tile load/AL) and LI(the weight of the load/RWL) were calculated estimate the physical stress imposed by each individual lifting task. As a result. 76.7% of the total LI' value exceeded 1 and 12.9% exceeded 3, and 84.7% of the total LI values exceeded 1 and 20.9% exceeded 3. 3. Bus 2 Department showed the highest rate of LI'>1 and LI>1 and Bus 1 Department showed the highest rate of LI'>3 and LI>3 4. In general, the RWLs by the 1994 equation were found lower than the ALs by the 1981 equation. It is assumed to he resulted from the fact that the 1994 equation includes methods evaluating asymmetrical lifting tasks and lifts of objects with less then optimal hand-container couplings, and also covers a larger range of work durations and lifting frequencies than the 1981 equation. 5. Significant correlations were found between LI' and incidence of LBP (R=0.734, p<0.05). LI and incidence of LBP(R=0.671. p<0.10) and load-weights and incidence of LBP(R=0.797, p<0.05). 6. Control measures are required to achieve the value of LI less than 1 for some tasks having high LI values. Engineering control is highly recommended for some tasks having the value of LI above 3.

• Journal of Preventive Medicine and Public Health
• /
• v.24 no.2 s.34
• /
• pp.171-180
• /
• 1991

Productivity analysis of physician is one of essential factors for the optimal health manpower planning. Among 690 physicians operating clinic and registered on the Kyeongsangnamdo Medical Association, 623 physicians were studied with a structural questionaire from April 1 to May 31, 1990. This study covers the general characteristics and productivity of physicians and attempts to find relevant determinants of their productivity through stepwise multiple regression analysis based on collected data. The mar results were as follows. First, physicians were more prevalent $35{\sim}44$ group (30.2%) in age, male (95.8%) in sex, specialist (76.5%) in specialization,'city (78.0%) in geographical location. Age group of 35-54 and specialist were mere prevalent in cities than in counties, while age group of 25-44 and 55 over and general practitioner in counties (p<0.001). Second, daily outpatients load of all physician were 77.1 persons on average. Age group of $35{\sim}44$ had the most outpatient load (90.3 persons) among all age group, $6{\sim}10$ years group (94.2 persons) in years of duration of practice, 11 hours per day group (83.4 persons) in working hours per day. Specialists had more outpatient load (82.6 persons) than general practitioners (61.1 persons) and physicians in cities had more (80.2 persons) than physicians in counties (66.3 persons). Daily average outpatient load of physicians were significantly different by their age, speciality, number of assistants and years of practice (p<0.001) and working location (p<0.05), but not significantly different by working hours per day of physician (p>0.1). Third, the productivity of physicians operating clinic were significantly affected by the three factors-number of assistants of physician, age of physician and duration of practice at the current clinic. Age of physician had negative regression coefficient.

• Korean Security Journal
• /
• no.14
• /
• pp.43-67
• /
• 2007

This is the study of efficient security system for candidates for the 17th President. The president election will be held in 20 countries this year. As conflicts between interest groups are expected to emerge, they are afraid of accidental raid in the campaign tour in addition to revival of regionalism and possibility of confrontation between interest groups with issues of anti-FTA In our country. The purpose of this study is to suggest appropriate method through study of security system for president candidate as just 6 months are left for the 17th president election. Also this study covers security environment for the president election, principle of security, and theoretical study for cause of terror, security system domestic and abroad and its analysis and how to provide the efficient security for president candidate. Therefore first, for desirable security the security should be provided by professional org like president security department. Second, combined security for target by current rules should be done. Fourth, total security is necessary to prevent security threats in advance. Third, the public security should be provided for every president candidates. Fifth, example of secret service in America should be studied and economical security should be considered Sixth, we should increase the use of Security Company and martial artists.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.12 no.5
• /
• pp.46-51
• /
• 2013

In this paper, a dual-band antenna is proposed for the RF power harvester system as well as RFID tag. The proposed antenna operates as the passive and active RFID tag antenna in the UHF and microwave band, respectively. In addition, to charge the battery of an active RFID tag in the microwave band, it harvest the RF signal for tagging from the passive RFID tag antenna in the UHF band. The proposed antenna operates in the UHF band (917~923.5 MHz) and microwave band (2.4~2.45 GHz). In order to obtain the dual-band operation, the dipole structure and meander parasitic elements are proposed as the ${\lambda}/2$ and $1{\lambda}$ dipole antenna, respectively. The radiating dipole structure in the microwave band acts as the coupled feed for the meander parasitic elements in the UHF band. The impedance bandwidth (VSWR < 2) of the proposed antenna covers 917~923.5 MHz (UHF band) and 2.4~2.45 GHz (Microwave band). Measured total efficiencies are over 45 % in the UHF band and over 70 % in the microwave band. Peak gains are over 0.18 dBi and 2.8 dBi in the UHF and microwave band with an omni-directional radiation pattern, respectively.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.44 no.1
• /
• pp.94-104
• /
• 2007

Iris recognition is biometric technology which uses a unique iris pattern of user in order to identify person. In the captured iris image by conventional iris recognition camera, it is often the case with eyelid occlusion, which covers iris information. The eyelids are unnecessary information that causes bad recognition performance, so this paper proposes robust algorithm in order to detect eyelid. This research has following three advantages compared to previous works. First, we remove the detected eyelash and specular reflection by linear interpolation method because they act as noise factors when locating eyelid. Second, we detect the candidate points of eyelid by using mask in limited eyelid searching area, which is determined by searching the cross position of eyelid and the outer boundary of iris. And our proposed algorithm detects eyelid by using parabolic hough transform based on the detected candidate points. Third, there have been many researches to detect eyelid, but they did not consider the rotation of eyelid in an iris image. Whereas, we consider the rotation factor in parabolic hough transform to overcome such problem. We tested our algorithm with CASIA Database. As the experimental results, the detection accuracy were 90.82% and 96.47% in case of detecting upper and lower eyelid, respectively.

• Journal of Environmental Policy
• /
• v.10 no.1
• /
• pp.27-47
• /
• 2011

Used as foundation resources for environment improvement and preservation of single-housing residential area by practicing classification of biotope with the concept of ecological area rate applied and performing urban thermal environment prediction simulation. Biotope is classified as seven types according to classification of biotope which is carried out with the concept of ecological area rate applied. The classification is listed below in descending order: building biotope(48.16%), impervious pavement biotope(39.75%), greenspace biotope(6.23%), crack permeable pavement biotope(3.26%), whole surface permeable pavement biotope(2.51%), parts permeable pavement biotope(0.04%). As a result of analysing prediction of variation and characteristics of thermal environment of single-housing residential area, land surface temperature per types of biotope are evaluated as listed below in descending temperature order: impervious pavement biotope > building biotope > greenspace biotope > permeable pavement biotope. In case 2 where vegetated roof hypothetically covers 100% of the roof area, temperature is predicted to be $33.58^{\circ}C$ Max, $23.85^{\circ}C$ Min, and $27.74^{\circ}C$ Avg. which is Approximately $5.19^{\circ}C$ lower than a non-vegetated roof. Average outdoor temperature for case 2 is studied to be $0.18^{\circ}C$ lower than case 1.

• Journal of the Korean earth science society
• /
• v.28 no.2
• /
• pp.202-213
• /
• 2007

The Odaesan earthquake $(M_L=4.8)$ occurred near Mt. Odae, Jinbu-Myon, Pyongchang-Gun, Kangwon Province on January 20, 2007. It has a shallow focal depth about 10 km. Its felt area covers most of the southern peninsula except some southern and western inland area. The maximum MM intensity was VI in the areas including Jinbu, Doam, Kangreung, Jumunjin, and Pyongchang. In these areas, there was a very strong shaking that caused several cracks on the walls of buildings and houses, slates falling off the roof, tiles being off the wall, things falling off the desk, and rock falling from the mountains. In order to get fault plane solutions, grid searches were performed by fitting distributions of P-wave first-motion polarities and SH/P amplitude ratios for each event. The results showed that the main shock represented right-lateral strike-slip sense and two aftershocks, reverse sense. It seems that the seismogenic fault may be the NNE-SSW trending Weoljeongsa fault near the epicenter based on the distribution of epicenters (foreshock, main shock, and aftershocks), damage area, and fault plane solution. The distribution of the epicenters indicates that the length of the subsurface rupture is estimated to be about 2 km.