• 대한치과교정학회지
• /
• 제49권2호
• /
• pp.116-123
• /
• 2019

As an alternative to the conventional fixed appliance that uses orthodontic brackets, a simple round tube without a bonding base can be bonded to the tooth surface by covering the tube with flowable resin. In this technique, bent wires cannot be inserted into the simple tubes; therefore, repositioning of the simple tubes is often required for adjustments. To reduce repositioning of simple tubes, a dome-shaped resin covering of the simple tube can be designed with a customized in-and-out compensation, using three-dimensional computer-aided design software based on digital simulation of orthodontic tooth movement. In the present case, the use of simple tubes bonded with customized resin coverings in a Class I nonextraction case is described in a 17-year-old male, in whom moderate crowding of the anterior teeth was treated over an 8-month period. This case shows that simple tubes can be used as an alternative to brackets in some Class I nonextraction cases, with the potential benefit of reducing decalcification.

• 한국환경농학회지
• /
• 제8권2호
• /
• pp.142-147
• /
• 1989

환기에 의한 열손실과 지중으로의 열손실을 제외하면 그린하우스의 열손실은 피복재를 통한 열전도 및 열복사에 의해 일어난다. 따라서 동일한 환경조건 하에서 프라스틱 필름으로 하우스를 만들 때 하우스의 보온력은 피복재를 통한 열손실 속도의 크기에 지배받는다. 본 연구에서는 프라스틱 필름을 통한 상대적 열손실 속도를 측정함으로써 하우스의 보온력을 예측할 수 있는 간단한 장치와 방법을 고안하였다. 육면체 형태의 frame을 만들어 측정용 필름으로 둘러싸서 밀폐된 box를 만들고 thermostat로 조절되는 heater와 box 내부의 온도변화를 감지 기록하기 위한 온도 Probe를 내부에 장치하였다. box 내부와 외부간에 일정한 온도차를 이루게 한 다음 (10$^{\circ}C$내외), 그 온도 차이가 유지되도록 일정한 양의 열을 10회에 걸쳐 단속적으로 (그리고 자동적으로) 투입함에 있어서 그 투입 에 요한 총 시간, 즉 항온유지시간을 재고, 이 항온유지 시간의 역수로서 필름을 통한 상대적 열손실 속도를 측정하였다. 동일한 두께의 필름인 경우에 상대적 열손실 속도는 PE>EVA>PVC의 순으로 감소하였고, silica gel보온재가 첨가된 필름의 열손실 속도는 보온재 무첨가 필름보다 역시 감소함을 보여주었다. 이러한 측정결과는 재질에 따른 필름 보온성에 관한 이미 상식화한 사실과 부합되는 것으로서, 본 고안 장치가 여러 가지 상품화된 하우스용 필름의 선별에 쉽게 이용될 수 있음을 시사한다.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2007년도 학술발표회 논문집
• /
• pp.309-310
• /
• 2007

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.379-382
• /
• 2005

Recently, we founded acoustic research laboratory consist of five reverberation rooms on the basis of ISO regulations. Four kinds of experiment are possible in our laboratory such as sound transmission loss of wall, sound attenuation of suspended ceiling, absorption coefficient, reduction of transmitted impact sound by floor coverings. We are going to provide our customers with officially authorized acoustics data.

• 대한수학회논문집
• /
• 제20권4호
• /
• pp.803-812
• /
• 2005

We construct an infinite family of closed 3-manifolds M(2m+ 1, n, k) which are identification spaces of certain polyhedra P(2m+ 1, n, k), for integers $m\;\ge\;1,\;n\;\ge\;3,\;and\;k\;\ge\;2$. We prove that they are (n / d)- fold cyclic coverings of the 3-sphere branched over certain links $L_{(m,d)}$, where d = gcd(n, k), by handle decomposition of orbifolds. This generalizes the results in [3] and [2] as a particular case m = 2.

• 대한수학회지
• /
• 제50권2호
• /
• pp.241-257
• /
• 2013

An automorphism group of a graph is said to be $s$-regular if it acts regularly on the set of $s$-arcs in the graph. A graph is $s$-regular if its full automorphism group is $s$-regular. In the present paper, all $s$-regular cubic graphs of order $10p^3$ are classified for each $s{\geq}1$ and each prime $p$.

• 대한수학회논문집
• /
• 제19권3호
• /
• pp.531-544
• /
• 2004

We study a family of 2-bridge knots with 2-tangles in the 3-sphere admitting a genus two 1-bridge splitting. We also observe a geometric relation between (g - 1, 1)-splitting and (g,0)- splitting for g = 2,3. Moreover we construct a family of closed orientable 3-manifolds which are n-fold cyclic coverings of the 3-sphere branched over those 2-bridge knots.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2022년도 추계학술대회
• /
• pp.152-152
• /
• 2022

• Environmental Engineering Research
• /
• 제18권3호
• /
• pp.169-176
• /
• 2013

The present study was designed to examine the concentrations, emission rates, and source characteristics of a variety of volatile organic compounds (VOCs) in 30 newly-constructed apartment buildings by measuring indoor and outdoor VOC concentrations over a 2-year period. For comparison, seven villa-type houses were also surveyed for indoor and outdoor VOC concentrations over a 3-month period. Indoor and outdoor air samples were collected on Tenax-TA adsorbent and analyzed using a gas chromatograph (GC)/mass spectrometer system or a GC/flame ionization detector system coupled to a thermal desorption system. The long-term change in indoor VOC concentrations depended on the type of VOCs. Generally, aromatic (except for naphthalene), aliphatic, and terpene compounds exhibited a gradual deceasing trend over the 2-year follow-up period. However, the indoor concentrations of the six halogenated VOCs did not significantly vary with time changes. Similar to these halogenated VOCs, the indoor naphthalene concentrations did not vary significantly with time changes over the 2-year period. Unlike the halogenated VOCs, the indoor naphthalene concentrations were much higher than the outdoor concentrations. The indoor concentrations of aliphatic and aromatic compounds were higher for the villa-type houses when compared to those of apartment buildings. In addition, four source groups (floor coverings and interior painting, household products, wood paneling and furniture, moth repellents) and three source groups (floor coverings and interior painting, household products, and moth repellents) were considered as potential VOC sources inside apartment buildings for the first- and second-year post-occupancy stages, respectively.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1995년도 춘계공동학술대회논문집; 전남대학교; 28-29 Apr. 1995
• /
• pp.515-528
• /
• 1995

Slips and falls are the major causes of the pedestrian injuries in the industry and the general community throughout the world. With the awareness of these problems, the friction coefficients of the interface between floorings and footwear have been measured for the evaluation of slip resistant properties. During this measurement process, the surface texture has been shown to be substantially effective to the friction mechanism between shoe heels and floor surfaces under various types of walking environment. Roughness, either of the floor surface or shoe heels, provides the necessary drainage spaces. This roughness can be designed into the shoe heel but this is inadequate in some cases, especially a wear. Therefore, it is essential that the proper roughness for the floor surface coverings should be provided. The phenomena that observed at the interface between a sliding elastomer and a rigid contaminated floor surface are very diverse and combined mechanisms. Besides, the real surface geometry is quite complicate and the characteristics of both mating surfaces are continuously changing in the process of running-in so that a finite number of surface parameters can not provide a proper description of the complex and peculiar shoe - floor contact sliding mechanism. It is hypothesised that the interface topography changes are mainly occurred in the shoe heel surfaces, because the general property of the shoe is soft in the face of hardness compared with the floor materials This point can be idealized as sliding of a soft shoe heel over an array of wedge-shaped hard asperities of floor surface. Therefore, it is considered that a modelling for shoe - floor contact sliding mechanism is mainly depended upon the surface topography of the floor counterforce. With the model development, several surface parameters were measured and tested to choose the best describing surface parameters. As the result, the asperity peak density (APD) of the floor surface was developed as one of the best describing parameters to explain the ambiguous shoe - floor interface friction mechanism. It is concluded that the floor surface should be continuously monitored with the suitable surface parameters and kept the proper level of roughness to maintain the footwear slip resistance. This result can be applied to the initial stage of design for the floor coverings.