• Journal of Microbiology and Biotechnology
• /
• 제8권4호
• /
• pp.416-421
• /
• 1998

A carboxyl group modifier, l-ethyl-3-(3-dimethylaminopropyl)carbodiimide (EDC) was used to study the interactions between three components of toluene dioxygenase (TDO) from Pseudomonas putida FI. $Ferredoxin_{TOL}$ activity was increased by the treatment with EDC; however, the activity was rapidly declined in the prolonged incubation. In covalent cross-linking experiments with EDC, $Ferredoxin_{TOL}$ made a one-to-one complex with $Reductase_{TOL}$ or the large subunit of $ISP_{TOL}$. These results provide evidence for the involvement of electrostatic interactions in the TDO electron transfer system.

• Bulletin of the Korean Chemical Society
• /
• 제16권12호
• /
• pp.1167-1172
• /
• 1995

A coverage of about 1 μm-sized pores of a membrane filter by four monolayers of maleic acids copolymers and poly(allylamine) (PAA) was attained by Langmuir-Blodgett (LB) technique through a covalent cross-linking followed a polyion complexation at the air-water interface. The copolymers were prepared to have side chains of hydrocarbon tail, carboxyl, and/or oligoether in the repeat unit. The surface pressure-area isotherms showed that the monolayers on an aqueous PAA have more expanded area than on pure water. The monolayers were transferable on a calcium fluoride substrate and a fluorocarbon membrane filter as Y deposition type, and the resulting LB films were characterized by FT-IR spectroscopy and scanning electron microscopy. A polymer network produced through interchain amide formation was confirmed in as-deposited films. The films were heat-treated in order to complete the cross-linking. SEM observation of the heat-treated film on a porous membrane filter showed that the four layer film was sufficiently stable to cover the filter pore of about 1 μm. Immersion of the film in water or in chloroform did not cause any change in its appearance on SEM and in FT-IR spectra.

• Journal of Microbiology and Biotechnology
• /
• 제1권1호
• /
• pp.54-62
• /
• 1991

Cyclodextrin glucanotransferase(CGTase) derived from Bacillus macerans was immobilized by (1) covalent linkage on chitosan and chitin with glutaraldehyde, (2) adsorption on DEAE-cellulose and Amberite IRA 900 after succinylation, and (3) entrapment on alginate and polyacrylamide by cross linking. Adsorption on Amberite IRA 900 and covalent linking on chitosan were identified to be the most suitable immobilization methods considering the yield of activity and stability of immobilized CGTase. The enzymatic properties of immobilized CGTase were investigated and compared with those of the soluble CGTase. Thermal stability of CGTase immobilized on chitosan was increased from 50 to $55^{\circ}C$, and the optimum temperature of CGTase immobilized on Amberite IRA 900 was shifted from 55 to $50^{\circ}C$. The effect of molecular size of soluble starch (substrate) on immobilized CGTase investigated using partially liquefied substrates with different dextrose equivalent(DE). Cyclodextrin(CD) conversion yield augmented according to the increase of DE level for immobilized CGTase on Amberite IRA 900. CD conversion yield of partially cyclized starch with soluble CGTase was higher compared with liquefied one with ${\alpha}-amylase$.

• 한국전기전자재료학회논문지
• /
• 제18권5호
• /
• pp.407-413
• /
• 2005

Ion implantation provides a unique way to modify the mechanical, optical and electrical properties of polymer by depositing the energy of ions in the material on the atomic scale. Implantation of ions into the polymers generally leads to a radiation damage, which, in many cases, modifies the properties of the surface and bulk of the material. These modifications result from the changes of the chemical structure caused in their turn by changing the chemical bonding when the incident ions cut the polymer chains, breaks covalent bonds, promotes cross-linking, and liberates certain volatile species. We studied the relation among the linear energy transfer (LET) and changes of surface microstructure and surface resistivity on PPS material using the high current ion implantation technology The surface resistivity of nitrogen implanted PPS decreased to $10^{7}{\Omega}/cm^{2}$ due to the chain scission, cross linking, ${\pi}$ electron creation and mobility increase. In this case, the surface conductivity depend on the 1-dimensional hopping mechanism.

• 한국수소및신에너지학회논문집
• /
• 제18권4호
• /
• pp.391-398
• /
• 2007

The covalently cross-linked sulfonated polyetheretherketone (CL-SPEEK) membrane was prepared by four-step synthesis of sulfonation-sulfochlorination, partial reduction, lithiation, and cross-linking, and its electrochemical and mechanical properties were investigated for water electrolysis application. The prepared ion exchange membranes showed good electrochemical and mechanical properties; proton conductivity of 0.116 S/cm at $80^{\circ}C$, water uptake of 44.6%, ion exchange capacity of 1.75 meq/g-dry-memb., tensile strength of 64.25 MPa and elongation of 61.11%. The membrane electrode assembly (MEA) with homemade membranes were prepared by non-equilibrium impregnation-reduction (I-R) method. Especially, the electrochemical surface area (ESA) and roughness factor of CL-SPEEK electrolyte by cyclic voltammetry method were 23.46 $m^2/g$ and 307.3 $cm^2-Pt/cm^2$, respectively. The prepared MEA was used in the unit cell of water electrolysis and the cell voltage was 1.81 V at 1 A/$cm^2$ and $80^{\circ}C$, with platinum loadings of 1.31 mg/$cm^2$.

• 한국재료학회지
• /
• 제22권5호
• /
• pp.227-236
• /
• 2012

Ionomer is a thermoplastic that is composed of covalent bonds and ionic bonds. It is possible to use this material in processes such as injection molding or extrusion molding due to the material's high oil resistance, weatherproof characteristics, and shock resistance. In this study, a new ionomer having a multifunctional group was prepared by a stepwise neutralization system with the addition of acidic and salt additives. In step I, to increase the contents of the multifunctional group and the acid degree in ethylene acrylic acid (EAA), MGA was added to the ionomer resin (EAA). A new ionomer was prepared via the traditional preparation method of the ionic cross-linking process. In step II, metal salt was added to the mixture of EAA and MGA. The extrusion process was performed using a twin extruder (L/D = 40, size : ${\varphi}30$). Ionomer film was prepared for evaluation of gas permeability by using the compression molding process. The degree of neutralized and ionic cross-linked new ionomer was confirmed by FT-IR and XRD analysis. In order to estimate the neutralization of the new ionomer film, various properties such as gas permeation and mechanical properties were measured. The physical strength and anti-scratch property of the new ionomer were improved with increase of the neutralization degree. The gas barrier property of the new ionomer was improved through the introduction of an ionic site. Also, the ionic degree of cross-linking and gas barrier property of the ionomer membrane prepared by stepwise neutralization were increased.

• KSBB Journal
• /
• 제13권1호
• /
• pp.52-57
• /
• 1998

The present work proposes a simple electrochemical method applicable to any immobilization processes of oxidase using a Clark type oxygen electrode as a base transducer. The present work suggests an optimal immobilization technique among three different methods of glucose oxidase(GOD) onto one side of $37[\mu}$mthick blend membranes, composed o 80% of cellulose triacetate and 20% of polycaprolactone, on the basis of the maximum Michaelis-Menten parameter(Vm) determined by either steady state or transient analyses. The electrode system was made of disk type gold cathode(4mm diameter) and Ag/AgCl anode. One side of the blend membrane was in contact with the cathode surface while the other side was immobilized with GOD either in covalent-bond or cross-linked forms, the latter being covered by $25{\mu}$m thick dialysis membrane of cellulose acetate. The resultant current density was on-line monitored by a potentiostat while glucose level was varied from 1 to 20 mM. The present study shows that direct cross-linking of GOD with glutaraldehyde was mostly preferred for fabrication of glucose sensor, on the basis of resultant kinetic parameters from either steady state or transient analyses.

• KSBB Journal
• /
• 제5권2호
• /
• pp.141-149
• /
• 1990

Aspergillus niger유래의 $\beta$-glucosidase를 (1)glutarald-ehyde를 가교제로 한 chitin과 chitosan담체에 covalent linkage (2)Amberite IRA93과 DEAE-cellulose담체에 succinylation시킨 후 흡착, 그리고 (3)alginarte, polyacry-lamide를 각종 가교제를 이용 entrapment등의 방법으로 고정화 하였다. Glutaraldehyde를 가교제로써 chitosan을 활성화시킨후 $\beta$-glucosidase를 고정화 시켰을때 효소활성 회수율이 31.5%로 가장 높았고, 또한 column형 반응기에서의 15일 경과 후 효소활성 유지도도 69%로서 가장 우수하였다. 또한 succinylation시킨 효소를 Amberite IRA93 담체에 흡착시켰을 때 효소활성 회수율은 24.7%였고 효소 활성유지도는 62%였다. 반면에 entra-pment 방법에 의한 $\beta$-glucosidase의 고정화는 효소의 계속적인 용출로 $\beta$-glucosidase의 고정화에는 적합하지 않았다. Chitosan담체에서의 고정화 최적조건을 조사한 결과 가교제인 glutaraldehyde의 최적농도는 0.4%였고, glutaraldehyde의 최적 반응 pH는 4.8이었다. 또한 column형 반응기를 이용하여 cellobiose로부터 glucose로의 전환율을 조사하여 고정화 효소의 효용성을 검토하였다.

• The Korean Journal of Physiology and Pharmacology
• /
• 제18권1호
• /
• pp.1-14
• /
• 2014

During long standing hyperglycaemic state in diabetes mellitus, glucose forms covalent adducts with the plasma proteins through a non-enzymatic process known as glycation. Protein glycation and formation of advanced glycation end products (AGEs) play an important role in the pathogenesis of diabetic complications like retinopathy, nephropathy, neuropathy, cardiomyopathy along with some other diseases such as rheumatoid arthritis, osteoporosis and aging. Glycation of proteins interferes with their normal functions by disrupting molecular conformation, altering enzymatic activity, and interfering with receptor functioning. AGEs form intra- and extracellular cross linking not only with proteins, but with some other endogenous key molecules including lipids and nucleic acids to contribute in the development of diabetic complications. Recent studies suggest that AGEs interact with plasma membrane localized receptors for AGEs (RAGE) to alter intracellular signaling, gene expression, release of pro-inflammatory molecules and free radicals. The present review discusses the glycation of plasma proteins such as albumin, fibrinogen, globulins and collagen to form different types of AGEs. Furthermore, the role of AGEs in the pathogenesis of diabetic complications including retinopathy, cataract, neuropathy, nephropathy and cardiomyopathy is also discussed.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1997년도 춘계학술대회
• /
• pp.47-50
• /
• 1997

We synthesized N-Hydroxysuccinimidyl (NHS) azidobenzoate as a cross-linking reagent for immobilization of peptide onto the solid surface. Thin polystyrene(PS) films spin-coated with a NHS azidobenzoate solution were exposed with ultraviolet light at 245nm$(3.3mW/cm^2)$ for 5 min. The NHS active ester groups became covalently attached to the polymer via photogenerated, highly reactive nitrene intermediates derived from NHS azidobenzoate. Using this technique, it is demonstrated that well-defined surface regions can be functionalized with a minimum observable feature size of 1mm for UV exposure. Through reaction of this functionalized PS surface with primary amine-containing biomolecules, biological molecule had been immobilized on the polymer surface.