• 한국전기전자재료학회논문지
• /
• 제35권4호
• /
• pp.342-347
• /
• 2022

In-situ analyzation and detection of real-time chemical reactions can be a significant part in interpreting the underlying mechanism in very reactive chemical reactions. To do this, first we have designed a microfluidic device (MFD) pattern for observation of synthesis of hierarchical nanostructures based on graphene oxide (GO), conjugating the well-known coupling reaction by which the solution of 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDC)-mediated coupling is enhanced in the presence of n-hydroxysuccinimide (NHS) to make amide bonding, hereafter called as the EDC coupling. Then, we have manufactured microfluidic devices with multiple tens of micrometer-sized channels that can circulate those nanomaterials to be chemically reacted in the channels. These microfluidic devices were made by negative photo lithography and soft lithography. We showed the possibility of using Raman spectroscopy to reveal the basic mechanism of the energy storage applications.

• Bulletin of the Korean Chemical Society
• /
• 제25권11호
• /
• pp.1645-1647
• /
• 2004

Potential energy surfaces for the reaction Al + $O_2{\to}$AlO + O have been calculated with the multireference configuration interaction (MRCI) method using molecular orbitals derived from the complete active space selfconsistent field (CASSCF) calculations. The end-on geometry is the most favourable for the reaction to take place. The small reaction barrier in the present calculation (0.11 eV) is probably an artefact related to the ionicneutral avoided crossing. The charge analysis implies that the title oxidation reaction occurs through a harpooning mechanism. Along the potential energy surface of the reaction, there are two stable intermediates of $AlO_2(C_{{\infty}v}$ and $C_{2v}$) at least 2.74 eV below the energy of reactants. The calculated enthalpy of the reaction (-0.07 eV) is in excellent agreement with the experimental value (-0.155 eV) in part due to the fortuitous cancellation of errors in AlO and $O_2$ calculations.

• 한국연소학회:학술대회논문집
• /
• 대한연소학회 2003년도 제27회 KOSCO SYMPOSIUM 논문집
• /
• pp.287-298
• /
• 2003

A numerical investigation of a catalytically stabilized thermal (CST) combustor was conducted for a multi-channel catalyst bed, and both the catalyst bed and thermal combustor were simultaneously modeled. The numerical model handled the coupling of the surface and gas reaction in the catalyst bed as well as the gas reaction in the thermal combustor. The behavior of the catalyst bed was investigated at a variety of operating conditions, and location of the flame in the CST combustor was investigated via an analysis of the distribution of CO concentration. Through parametric analyses of the flame position, it was possible to derive a criterion to determine whether the flame is present in the catalyst bed or the thermal combustor for a given inlet condition. The results showed that the maximum inlet temperature at which the flame is located in the thermal combustor increased with increasing inlet velocity.

• 약학회지
• /
• 제39권1호
• /
• pp.48-54
• /
• 1995

Coupling of tetracycline(Tc) to dithiocarbamate chitosan(DTCC) via chelate bond was investigated varying reaction time, concentration, temperature, pH, and Ca(II)/Tc ratio. The amount of Tc bound to matrix increased to give a maximum and decreased as the reaction proceeded. The degree and rate of dissociation of Tc complex were affected by the reaction temperature, and pH. By running the reaction at low temperature and pH, the degree of dissociation was greatly diminished. Properties of drug-release from DTCC-Ca(II)-Tc complex were studied by batch- and flow-method and release of Tc and CA(II) by flow method followed nearly zero-order. DTCC-Ca(II)-Tc showed very prolonged antimicrobial activity compared to that of free Tc.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1985년도 하계학술회의논문집
• /
• pp.191-193
• /
• 1985

Reaction temperature md piezoelectric properties of Pb(Mn1/3 Sb2/3)0.08 Ti0.495 Zr0.425 $O_3$ ceramics by hydrothermal synthesis method have been investigated. Sintering density and dielectric constant of sample increased with increasing of hydrothermal reaction temperature, while decreased rapidly above $240^{\circ}C$. Electromechanical coupling factor kp was almost constant at the reaction temperature $160^{\circ}-240^{\circ}C$.

• Bulletin of the Korean Chemical Society
• /
• 제17권2호
• /
• pp.153-158
• /
• 1996

The synthesis of common skeleton of podosporin A and aureol was studied through cationic olefin cyclization as a key step. The generation of thermodynamic silyl enol ether or enol acetate under known conditions gave regioselectivity of 88:12. The enolate alkylation of 2,3-dimethylcyclohexanone with 2,5-dimethoxybenzyl bromide at the more substituted site via lithium enolate gave poor yield. In this case an organozincate or an ammonium enolate also proved to be ineffective or not practical in terms of yield. Side chain elongation of the substituted cyclohexanone 13 through Grignard reaction, Wittig reaction, or Shappiro reaction did not proceed because of steric hindrance and side reactions. However, Stille coupling reaction via enol triflate produced the desired product 18 in high yield. The advanced intermediate 22, which was efficiently synthesized from 18, produced 24 instead of the desired product under a cationic olefin cyclization condition, indicating that the cyclization occurred in a stepwise mannervia the organomercury intermediate 23.

• 공업화학
• /
• 제30권1호
• /
• pp.68-73
• /
• 2019

실리카 표면의 개질을 위하여 다양한 조건 하에서 tetraethyl orthosilicate (TEOS)로부터 졸-겔 공법으로 제조한 실리카 졸에 실란 커플링제인 octyltrimethoxysilane (OTMS) 또는 hexadecyltrimethoxysilane (HDTMS)을 반응시켰다. 얻어진 반응물들의 SEM-EDS, 열분석 및 원소분석을 통하여 실리카의 표면이 유기물로 개질된 것을 확인할 수 있었다. 유기용매에서의 분산성 및 에폭시 수지와 복합화한 필름의 표면 조도 등을 평가한 결과, 에탄올을 용매로 사용하여 $50^{\circ}C$에서 TEOS를 24 h 가수분해하고, OTMS를 2 h 반응시킨 물질이 최적으로 나타났다. 이와 같은 표면 개질 실리카를 포함하는 복합체 필름의 산소 투과도를 측정한 결과, 개질 실리카를 포함하지 않는 필름에 비하여 산소 투과도가 12% 저하된 것을 확인할 수 있었다.

• Archives of Pharmacal Research
• /
• 제15권3호
• /
• pp.191-195
• /
• 1992

Two 6'-substituted dobutamine analogues (1, 2) were synthesized from the coupling reaction of dopamine with the corresponding ketones. The ketone (8) was obtained from 4-nitrosalicyladehyde via 6 synthetic steps while the ketone (12) was prepared from 2-methyl-5-nitrobenzoic acid via 7 synthetic steps. Another synthetic attempts were also reported.

• Bulletin of the Korean Chemical Society
• /
• 제31권2호
• /
• pp.500-502
• /
• 2010

• 대한화학회지
• /
• 제40권1호
• /
• pp.96-99
• /
• 1996