• 제목/요약/키워드: coupling efficiency

검색결과 650건 처리시간 0.025초

전자기유도방식을 이용한 무선 충전 기기의 구현 및 성능 측정 (Performance Measurement of the Wireless Charging Devices Using Eletromagnetic Induction Techniques)

  • 류다운;김영현;구경헌
    • 한국항행학회논문지
    • /
    • 제19권3호
    • /
    • pp.237-243
    • /
    • 2015
  • 본 논문에서는 전자기 유도 방식을 이용하여 무선전력전송 시스템을 구현하고 전송 효율을 측정하였다. 또한 수신부 코일의 세부 조건 변화에 따른 효율 변화를 확인하고 최적의 코일 조건을 제시하였다. 제작한 송수신부 회로를 이용하여 수신 코일 위치에 따른 전압 변화를 측정하고, 같은 위치에서 인덕턴스 값 변화에 따른 전압변화를 측정하였으며, 휴대폰 충전 시간을 측정하는 앱을 개발하여 충전 상태에 따른 무선전력전송 충전 시간을 비교하여 이를 통해 최적의 무선전력전송 시스템을 구현하고자 하였다. 개발된 전자기 유도방식을 이용한 무선전력전송 시스템은 주파수 125 kHz를 사용하며, 핸드폰 50%에서 60%까지 충전 시 유선 충전기는 16분, 무선충전기는 23분의 충전시간을 가졌다.

이형코일을 이용한 무선전력전송 시스템 송신 코일 최적화 (Optimizing Transmitting Coil of Wireless Power Transmission System with Different Shape Coils)

  • 김영현;구경헌
    • 한국항행학회논문지
    • /
    • 제21권6호
    • /
    • pp.614-619
    • /
    • 2017
  • 본 논문에서는 6.78 MHz 자기공진방식 무선전력전송 송수신 코일을 최적화하고 이에 따른 시뮬레이션 및 측정 결과를 제시하였다. 전송 효율은 시스템 형태 및 코일 크기 등 다양한 요인에 따라 영향을 받게 되므로 자기 공진형 무선전력전송의 실용화에 있어 코일 구조를 각각 송신용 헬리컬 공진코일과 수신용 평판형 스파이럴 공진코일을 구성하여 부피의 문제점을 최소화하고 원통형 형태의 무선충전형태에 맞게 코일의 크기, 공진기 내의 코일과 코일 간의 거리 등을 결정하였으며, 전자계 시뮬레이션을 통해 이를 확인하였다. 860mm 지름 상판과 600mm 떨어진 기둥의 원통형 구조에 대하여 적용 가능한 무선전력전송 코일을 설계하여 특성을 시뮬레이션하고, 제작하여 특성을 측정하였다. 시뮬레이션 특성은 ${\mid}S_{21}{\mid}$이 -0.53 dB, 효율 88 %, 측정 결과는 ${\mid}S_{21}{\mid}$이 -0.71 dB 로 효율 85 %를 나타내었다.

Development of The New High Specific Speed Fixed Blade Turbine Runner

  • Skotak, Ales;Mikulasek, Josef;Obrovsky, Jiri
    • International Journal of Fluid Machinery and Systems
    • /
    • 제2권4호
    • /
    • pp.392-399
    • /
    • 2009
  • The paper concerns the description of the step by step development process of the new fixed blade runner called "Mixer" suitable for the uprating of the Francis turbines units installed at the older low head hydropower plants. In the paper the details of hydraulic and mechanical design are presented. Since the rotational speed of the new runner is significantly higher then the rotational speed of the original Francis one, the direct coupling of the turbine to the generator can be applied. The maximum efficiency at prescribed operational point was reached by the geometry optimization of two most important components. In the first step the optimization of the draft tube geometry was carried out. The condition for the draft tube geometry optimization was to design the new geometry of the draft tube within the original bad draft tube shape without any extensive civil works. The runner blade geometry optimization was carried out on the runner coupled with the draft tube domain. The blade geometry of the runner was optimized using automatic direct search optimization procedure. The method used for the objective function minimum search is a kind of the Nelder-Mead simplex method. The objective function concerns efficiency, required net head and cavitation features. After successful hydraulic design the modal and stress analysis was carried out on the prototype scale runner. The static pressure distribution from flow simulation was used as a load condition. The modal analysis in air and in water was carried out and the results were compared. The final runner was manufactured in model scale and it is going to be tested in hydraulic laboratory. Since the turbine with the fixed blade runner does not allow double regulation like in case of full Kaplan turbine, it can be profitably used mainly at power plants with smaller changes of operational conditions or in case with more units installed. The advantages are simple manufacturing, installation and therefore lower expenses and short delivery time for turbine uprating.

디스크형 압전변압기의 전극비에 따른 전기적 특성 (A Electrical Characteristics of Disk-type Piezotransformer with Electrode Ratio of Driving and Generating Part)

  • 이종필;채홍인;정수현;홍진웅
    • 대한전기학회논문지:전기물성ㆍ응용부문C
    • /
    • 제52권10호
    • /
    • pp.458-463
    • /
    • 2003
  • In order to develope piezoelectric transformer for the ballast of fluorescent lamp, a new shape and electrode pattern of piezoelectric transformer has been investigated in this work. The composition of piezoelectric ceramics was 0.95Pb(Zr$_{0.51}$Ti$_{0.49}$)O$_3$+0.03Pb(Mn$_{1}$3/Nb$_{2}$3/)O$_3$+0.02Pb(Sb$_{1}$2/Nb$_{1}$2/)O$_3$. The sample prepared by this composition system showed the characteristics which has about 1200 of relative dielecric constant, 1100 of the mechanical quality factor, 0.53 of the electromechanical coupling coefficient, 320 pC/N of the piezoelectric constant d$_{33}$, 0.3 % of the dissipation factor. Diameter and thickness of disk-type piezoelectric transformer was 45 mm and 4 mm, respectively. The driving and generating electrode with their gap of 1mm were fabricated on the top surface. But the common electrode was fabricated on the whole bottom surface. The electrode surface ratio of driving and generating part on the top surface ranges from 1.4:1 to 3:1. We investigated the electrical characteristics with the variation of the electrode surface ratio of driving and generating part in the range of load resistance of 100 $\Omega$~70 k$\Omega$. The set-up voltage ratio of this piezoelectric transformer increases with increasing both the electrode surface of driving part and the load resistance. The set-up voltage ratio at no load resistance was more than 60 times. On the other hand, the efficiency decreases with increasing the electrode surface of driving part. In the case of the electrode surface of both 1.4:1 and 2:1, maximum efficiency showed above 97 % at load resistance of 2 k$\Omega$. However, in the case of the electrode surface of 3:1, maximum efficiency showed about 94 % at load resistance of 3 k$\Omega$.>.>.>.

마이크로 렌즈 어레이와 회절격자 레지스트 패턴을 이용한 유기광원(OLED)의 광 추출 효율 향상 (Outcoupling Enhancement of OLED using Microlens Array and Diffractive Grating)

  • 장지향;김경조;김진헌;오민철
    • 한국광학회지
    • /
    • 제18권6호
    • /
    • pp.441-446
    • /
    • 2007
  • OLED 소자는 유리기판과 공기 층의 경계면에서 발생하는 전반사와 ITO-유기층으로 형성되는 광도파로를 따라 진행하는 도파모드 결합으로 인해 내부에서 생성된 빛의 80% 이상이 외부로 추출되지 못하게 된다. 본 연구에서는 마이크로 렌즈 어레이와 회절격자 레지스트 층을 이용하여 소자 내부에서 손실되는 빛을 외부로 추출시킴으로써 OLED의 발광효율을 향상시킨다. 마이크로 렌즈 어레이를 이용하여 유리기판-공기 전반사로 인해 내부에 갇히는 빛을 외부로 출력시키고, ITO 와 유기물 사이에 회절격자 레지스트 층을 삽입하여 ITO-유기층 광도파로에 갇힌 빛들을 수직방향으로 추출될 수 있도록 하였다. 제작된 OLED 소자에 전류밀도 $20mA/cm^2$를 인가한 경우, 마이크로 렌즈 어레이를 적용한 OLED에서 22%의 효율 개선을 얻었고, 회절격자 레지스트 층을 가지는 OLED 의 경우 41%의 효율개선을 얻을 수 있었다.

4,7-Di-thiophen-2-yl-benzo[1,2,5]thiadiazole을 기본으로 한 고분자의 합성 및 광전변환 특성 (Synthesis and Photovoltaic Properties of Low Band Gap π-Cojugated Polymer Based on 4,7-Di-thiophen-2-yl-benzo[1,2,5]thiadiazole)

  • 신웅;유혜리;박정배;박상준;정미선;문명준;김주현
    • 공업화학
    • /
    • 제21권2호
    • /
    • pp.137-141
    • /
    • 2010
  • 4,7-Di-thiophen-2-yl-benzo(1,2,5)thiadiazole과 1,4-bis(dodecyloxy)-2,5-divinylbenzene을 Heck coupling 중합법을 이용하여 poly[4,7-Di-thiophen-2-yl-benzo(1,2,5)thiadiazole]-alt-1,4-bis(dodecyloxy)-2,5-divinylbenzene (PPVTBT) 공중합체를 합성하였다. 합성한 PPVTBT의 최대흡수파장과 band gap은 각각 550 nm와 1.74 eV이고 HOMO와 LUMO enegry level은 각각 -5.24 eV, -3.50 eV로 나타났다. 합성한 공중합체인 PPVTBT와 (6)-1-(3-(methoxycarbonyl)propyl)-{5}-1-phenyl[5,6]-$C_{61}$(PCBM)을 1 : 6의 중량비로 blend하여 제작한 소자의 효율은 AM 1.5 G, 1 sun 조건($100mA/cm^{2}$)에서 0.16%의 효율을 보였다. 그리고 소자의 Jsc (short circuit current), FF (fill factor)와 Voc (open circuit voltage)는 각각 $0.74mA/cm^{2}$, 31%, 0.71 V로 나타났다.

2-pyran-4-ylidene-malononitrile을 기본으로 하는 작은 Band Gap을 가지는 공중합체의 합성 및 광전변환 특성 (Synthesis and Photovoltaic Properties of Low Band Gap π-conjugated Polymers Based on 2-pyran-4-ylidene-malononitrile Derivatives)

  • 유혜리;신웅;박정배;박상준;임준혁;김주현
    • 공업화학
    • /
    • 제20권3호
    • /
    • pp.273-278
    • /
    • 2009
  • Heck coupling reaction을 이용해서 poly[2-(2,6-dimethylpyran-4-ylidene)malononitrile-alt-1,4-bis(dodecyloxy)-2,5-divinylbenzene] (PM-PPV), poly[2-{2,6-Bis-[2-(5-bromothiophen-2-yl)-vinyl]-pyran-4-ylidene}-malononitrile-alt-1,4-bis(dodecyloxy)-2,5-divinylbenzene] (PMT-PPV), poly[2-[2,6-Bis-(2-{4-[(4-bromophenyl)-phenylamino]-phenyl}-vinyl)-pyran-4-ylidene]-malononitrile-alt-1,4-bis(dodecyloxy)-2,5-divinylbenzene] (PMTPA-PPV)를 합성하였다. PM-PPV, PMT-PPV, PMTPA-PPV의 band gap은 각각 2.18 eV, 1.90 eV, 2.07 eV로 나타났다. LUMO 에너지 준위는 각각 3.65 eV, 3.54 eV, 3.62 eV로 나타났고 HOMO 에너지 준위는 각각 5.83 eV, 5.61 eV, 5.52 eV이고 소자를 제작하여 측정한 결과는 AM 1.5 G [1 sun condition ($100mA/cm^2$)]에서의 효율은 0.028%, 0.031%, 0.11%이고 open-circuit voltage (Voc)는 0.59 V~0.69 V로 나타났다.

실리콘 도파로와 광섬유 사이의 효율적인 광 결합을 위한 아디아바틱 광섬유 테이퍼 (Adiabatic Optical-fiber Tapers for Efficient Light Coupling between Silicon Waveguides and Optical Fibers)

  • 손경호;최지원;정영재;유경식
    • 한국광학회지
    • /
    • 제31권5호
    • /
    • pp.213-217
    • /
    • 2020
  • 본 논문에서는 아디아바틱(adiabatic) 광섬유 테이퍼의 습식 식각 기반 제조 방법에 대해 보고하고 1550 nm 파장에서의 아디아바틱 성질 및 테이퍼드 광섬유에서 HE11 모드의 전개에 대해 설명하고자 한다. 제조한 결과물은 아디아바틱 성질을 잘 만족하며 far field 패턴 측정 결과로부터 테이퍼 전체에 걸쳐 고차 모드 커플링 없이 기본 HE11 모드가 유지되는 것을 보여준다. 측정한 far field 패턴의 경우에 시뮬레이션 결과와 잘 일치하는 것을 검증하였고, 테이퍼드 광섬유는 다수의 광자 응용에 적용할 수 있으며 특히 광섬유-칩 패기지에 적용할 수 있다. 시뮬레이션을 통해서 제작한 아디아바틱 광섬유 테이퍼를 모델링한 후 역방향 테이퍼드 실리콘 도파관 사이의 광 전송률 시뮬레이션을 살펴보았을 때, 1 dB 초과 손실(실리콘 도파관 각도 1°)이 약 ~60 ㎛ 길이라는 여유있는 공간 치수 공차를 보이며, 0.4 dB 미만의 삽입 손실(실리콘 도파관 각도 4°)을 보인다. 또한, 본 연구자들이 제시하는 아디아바틱 커플러가 O 밴드 및 C 밴드 대역을 넘어, 초 광대역 결합 효율 가능성을 보이는 것을 확인하였다.

BPM에 의한 Monolithic Laser-Waveguide Coupler의 특성 연구 (A Study on the Characteristics of Monolithic Laser-Waveguide Coupler by BPM)

  • 장지호;최태일;최병하
    • 한국통신학회논문지
    • /
    • 제19권1호
    • /
    • pp.100-110
    • /
    • 1994
  • 본 연구에서는 효율적인 광원과 광도파로간의 결합방법으로서 많은 연구가 진행중인 monolithic laser-waveguide coupler 특성해석에 beam propagation method를 도입하여 기존의 방법과 비교검토 한 결과 타당성을 입증할 수 있었으며, 또한 결합효율을 향상시키기 위하여 taper 구조를 가진 monlithic laser-waveguide coupler를 제시하였다. monolithic laser-waveguide coupler는 능동소자인 laser의 특성과 수동소자인 waveguide의 특성을 동시에 가지고 있으므로 고려하여야할 요소가 매우 많고, 또 각 요소들의 변화에 따라 결합기의 성능이 크게 좌우되므로 그 특성 연구가 많은 어려움이 있었다. 때문에 본 연구에서는 방향성 결합기를 사용한 모델을 해석하는 방법으로 기존의 coupled mode 이론을 사용할 수도 있겠으나, 본 연구에서와 같이 많은 변수를 가지는 경우의 해석에는 적용하기 어렵다는 단점 때문에 beam propagation method를 사용한 해석을 시도하였다. 또한 해석에 있어서 가장 기본이 되는 초기전개의 계산에서도 종래의 연구에서와 달리 근사식을 이용해 전계를 계산하지 않고, 주어진 구조에 대하여 직접 finite difference method를 적용하여 초기전계를 구하였다. 이러한 새로운 시도들이 가지는 잇점을 방법과 비교하여 알아 보았으며, 새로운 방법의 적용을 통하여 보다 많은 변수를 고려하여 monolithic laser-waveguide coupler의 특성을 연구할 수 있었다. 이러한 과정을 통하여 결합기의 특성을 파악하고 그 결과로 monolothic laser-waveguide coupler의 특성중 가장 중요한 결합특성을 향상 시키기 위해서 taper영역을 가지는 monolothic laser-waveguide coupler를 제안하였다. 본 연구에서 제안한 구조에 대하여 특성을 조사해본 결과 79%정도의 좋은 결합효율을 얻을 수 있었다.

  • PDF

망간산화물을 이용한 1-Naphthol의 산화 제거 연구 (Oxidative Transformation of 1-Naphthol Using Manganese Oxide)

  • 임동민;강기훈;신현상
    • 대한환경공학회지
    • /
    • 제28권5호
    • /
    • pp.535-542
    • /
    • 2006
  • 본 연구에서는 일반 토양 중에 존재하는 망간산화물의 하나인 버네사이트(birnessite)를 이용한 1-naphthol의 산화-공유결합 반응에 의한 제거 특성을 다양한 반응조건(반응시간, 버네사이트 주입량 및 pH 등)에서 회분식 실험을 통하여 조사하였다. 버네사이트에 의한 1-naphthol의 제거효율은 모든 반응조건에서 우수하였으며, 생성되는 반응산물은 1-naphthol의 산화-공유결합 반응에 의한 중합체임을 반응 후 상등액에 대한 UV-vis. 흡광 분석 및 질량분석기를 이용한 분자량 분석을 통해 확인하였다. 버네사이트 첨가량에 따른 1-naphthol의 산화 변환 실험 결과는 유사-일차 반응속도 식을 적용하여 반응 속도 상수, k를 구하였으며, 이 유사-일차 속도상수를 버네사이트의 비표면적으로 표준화하여 도출한 반응속도상수($k_{surf}$)는 $9.31{\times}10^{-4}(L/m^2{\cdot}min)$이었다. 또한, 버네사이트에 의한 1-naphthol의 산화 변환 효율은 수용액의 pH에 영향을 받았으며, pH가 10에서 4로 감소하면서 유사-일차 반응속도 상수는 $0.129min^{-1}$에서 $0.187min^{-1}$로 증가하였다.