• 반도체디스플레이기술학회지
• /
• 제21권2호
• /
• pp.7-10
• /
• 2022

A functional polyethylene terephthalate substrate to increase light extraction efficiency of organic light-emitting diodes is studied. We formed nano-structured PET surfaces by controlling the power, gas, and exposure time of the linear ion-beam. The haze of the polyethylene terephthalate can be controlled from 0.2% to 76.0% by changing the peak-to-valley roughness of nano structure by adjusting the exposure cycle. The treated polyethylene terephthalate shows average haze of 76.0%, average total transmittance of 86.6%. The functional PET increases the current efficiency of organic light-emitting diodes by 47% compared to that of organic light-emitting diode on bare polyethylene terephthalate. In addition to polyethylene terephthalate with light extraction performance, by conducting additional research on the development of functional PET with anti-reflection and barrier performance, it will be possible to develop flexible substrates suitable for organic light-emitting diodes lighting and transparent flexible displays.

• Journal of electromagnetic engineering and science
• /
• 제16권4호
• /
• pp.219-224
• /
• 2016

In this paper, coupled-mode theory (CMT) is used to obtain a transient solution analytically for a wireless power transfer system (WPTS) when unit energy is applied to one of two resonators. The solutions are compared with those obtained using equivalent circuit-based analysis. The time-domain CMT is accurate only when resonant coils are weakly coupled and have large quality factors, and the reason for this inaccuracy is outlined. Even though the time-domain CMT solution does not describe the WPTS behavior precisely, it is accurate enough to allow for an understanding of the mechanism of energy exchange between two resonators qualitatively. Based on the time-domain CMT solution, the critical coupling coefficient is derived and a criterion is suggested for distinguishing inductive coupling and magnetic resonance coupling of the WPTS.

• Journal of Power Electronics
• /
• 제17권6호
• /
• pp.1694-1706
• /
• 2017

Models and experiments for magnetic resonance coupling wireless power transmission (MRC-WPT) topologies such as the chain topology and branch topology are studied in this paper. Coupling mode theory based energy resonance models are built for the two topologies. Complete energy resonance models including input items, loss coefficients, and coupling coefficients are built for the two topologies. The storage and the oscillation model of the resonant energy are built in the time domain. The effect of the excitation item, loss item, and coupling coefficients on MRC systems are provided in detail. By solving the energy oscillation time domain model, distance enhancing models are established for the chain topology, and energy relocating models are established for the branch topology. Under the assumption that there are no couplings between every other coil or between loads, the maximum transmission capacity conditions are found for the chain topology, and energy distribution models are established for the branch topology. A MRC-WPT experiment was carried out for the verification of the above model. The maximum transmission distance enhancement condition for the chain topology, and the energy allocation model for the branch topology were verified by experiments.

• Journal of Power Electronics
• /
• 제18권4호
• /
• pp.1278-1292
• /
• 2018

Inductive power transfer (IPT) technology allows for charging of electric vehicles with security, convenience and efficiency. However, the IPT system performance is mainly affected by the magnetic coupling structure which is largely determined by the coupling coefficient. In order to get this applied to electric vehicle charging systems, the power pads should be able to transmit stronger power and be able to better sustain various forms of deviations in terms of vertical, horizontal direction and center rotation. Thus, a novel cross-shaped magnetic coupling structure for IPT charging systems is proposed. Then an optimal cross-shaped magnetic coupling structure by 3-D finite-element analysis software is obtained. At marking locations with average parking capacity and no electronic device support, a prototype of a 720*720mm cross-shaped pad is made to transmit 5kW power at a 200mm air gap, providing a $1.54m^2$ full-power free charging zone. Finally, the leakage magnetic flux density is measured. It indicates that the proposed cross-shaped pad can meet the requirements of the International Commission on Non-Ionizing Radiation Protection (ICNIRP) according to the Australian Radiation Protection and Nuclear Safety Agency (ARPANSA).

• 콘크리트학회논문집
• /
• 제28권2호
• /
• pp.187-196
• /
• 2016

KBC2009에 의하면 특수전단벽과 연결되는 폭이 좁고 춤이 높은 연결보는 대각선 다발철근 보강을 실시해야 한다. 그러나 대각선 다발 철근의 사용은 시공성과 경제성에 부정적인 영향을 미칠 것으로 예상된다. 이에 본 연구에서는 4개의 서로 다른 상세를 갖는 연결보를 대상으로 주기하중 재하 실험을 실시하여 각각의 성능을 평가하였다. 또한 그 실험결과를 바탕으로 하여 특수전단벽과 연결보로 이루어진 병렬전단벽 구조시스템을 구성하여 FEMA P695에 따른 방법론으로 내진성능평가를 실시하였다.

• 한국광학회지
• /
• 제13권6호
• /
• pp.461-466
• /
• 2002

파장분할 다중화 시스템의 다중 채널분리 필터가 측면연마 광섬유 결합기를 이용한 빗살필터로 구현됨을 제안하였다 단일 모드 광섬유의 기본모드와 결합하는 상부 평면 도파로의 모드가 고차일수록 광 전력전달 효율은 낮아지는데, 두 도파로 사이 에 중간 결합층을 삽입함으로서 개선시킬 수 있고 최적화 조건에서 20dB 이상의 채널간 소멸비를 얻을 수 있음을 보였다. 200fm두께의 리튬나오베이트를 상부 평면 도파로로 적용한 경우 4m의 채널간격을 가지는 빗살필터 특성을 얻었으며, 중간 결합층의 두께가 1 Um일 때 굴절률이 1.52-1.53 범위에서 최대 광 전력전달이 일어남을 관측하였고 빔 전파 방법을 이용하여 계산한 결과와 거의 일치함을 보였다.

• Nuclear Engineering and Technology
• /
• 제54권1호
• /
• pp.97-109
• /
• 2022

Multi-dimensional coupling analysis is a research hot spot in nuclear reactor thermal hydraulic study and both the full-scale system transient response and local key three-dimensional thermal hydraulic phenomenon could be obtained simultaneously, which can achieve the balance between efficiency and accuracy in the numerical simulation of nuclear reactor. A one-dimensional to three-dimensional (1D-3D) coupling platform for the nuclear reactor multi-dimensional analysis is developed by XJTU-NuTheL (Nuclear Thermal-hydraulic Laboratory at Xi'an Jiaotong University) based on the CFD code Fluent and system code RELAP5 through the Dynamic Link Library (DLL) technology and Fluent user-defined functions (UDF). In this paper, the International Standard Problem (ISP) No. 43 is selected as the benchmark and the rapid boron dilution transient in the nuclear reactor is studied with the coupling code. The code validation is conducted first and the numerical simulation results show good agreement with the experimental data. The three-dimensional flow and temperature fields in the downcomer are analyzed in detail during the transient scenarios. The strong reverse flow is observed beneath the inlet cold leg, causing the de-borated water slug to mainly diffuse in the circumferential direction. The deviations between the experimental data and the transients predicted by the coupling code are also discussed.

• IEIE Transactions on Smart Processing and Computing
• /
• 제5권2호
• /
• pp.123-128
• /
• 2016

In this paper, an inversely tapered coupler with Bragg reflectors is reported for the first time. With appropriately positioned reflecting structures, our fiber-to-chip coupler can more efficiently transmit the light from fiber to a waveguide in a photonic integrated circuit (PIC). A numerical simulation evaluated the coupler's efficiency with the reflector. Optimized parameters that maximize the efficiency of the coupler are also investigated. Simulation results show that the reflector with appropriate parameters enhances efficiency by up to 7 dB. Likewise, Bragg metal reflectors implemented by the conventional metallization process can also improve efficiency. It is also shown that the proposed reflector enhances the coupling efficiency in a double-tip taper coupler.

• 한국전자파학회논문지
• /
• 제19권9호
• /
• pp.1037-1044
• /
• 2008

본 논문에서는 휴대단말기 내의 EMI 도료 부분에 슬롯을 부설함으로써 안테나의 효율 증가와 더불어 이득이 증가됨을 보인다. 단말기 내의 EMI 도료 부분에 적절한 위치에 특정 크기를 갖는 슬롯을 부설하면, 안테나와 슬롯간의 상호 결합에 의한 안테나 전류 밀도의 증가는 안테나의 효율 증가를 야기시킬 수 있다. EMI의 슬롯에 의한 안테나 효율 증가에 대한 실험은 기존의 GSM/DCS/USPCS/WCDMA 대역에 사용하는 휴대폰에 적용하여 제반 특성을 측정한다. 측정 결과, 공진 주파수의 이동은 없으며, 채널별 안테나 효율은 슬롯 부설이 기존 슬롯이 없을 때에 비해 전 대역에 걸쳐 $0.21{\sim}8.96\;%$ 향상됨을 보인다.

• 한국전자파학회논문지
• /
• 제22권11호
• /
• pp.1047-1053
• /
• 2011

본 논문에서는 근거리에서 효율 향상을 위해 적응 주파수 제어 회로를 갖는 HF-대역 무선 전력 전송 시스템을 제안하였다. 일반적으로 무선 전력 전송 시스템은 공진기 간의 이격 거리가 가까워짐에 따라 결합 계수가 변하게 되며, 이는 반사 임피던스에 의한 임피던스 부정합을 발생시킨다. 본 연구에서 제안한 방식은 전압제어 발진기의 공진 주파수를 이격 거리에 따라 자동으로 가변함으로써 공진기 간의 거리가 가까워 임피던스 부정합이 큰 경우에도 전송 효율의 저하를 막을 수 있다. 적응 주파수 제어 회로는 방향성 결합기, 검파기 및 루프 필터로 구성된다. 본 논문에서 제안한 방법의 유용성을 입증하기 위하여 HF-대역에서 동작하는 30${\times}$30 $cm^2$ 크기의 루프 안테나를 갖는 무선 전력 전송 시스템을 설계하여 측정한 결과 근거리에서 효율이 개선됨을 확인하였다.