• 제목/요약/키워드: coupling circuit

검색결과 474건 처리시간 0.025초

서지 보호기의 열화 특성과 온라인 진단장치 (Deterioration Characteristics and an On-Line Diagnostic Equipment for Surge Protective Devices)

  • 박경수;왕국명;황성철;김선재;길경석
    • 한국전기전자재료학회논문지
    • /
    • 제29권10호
    • /
    • pp.635-640
    • /
    • 2016
  • This paper dealt with the deterioration characteristics and an on-line diagnosis equipment for SPDs (surge protective devices). An accelerated aging test was carried out using a $8/20{\mu}s$ standard lightning impulse current to analyze the changes of electrical characteristics and to propose the diagnostic parameters and the criterion for deterioration of ZnO varistor which is the core component of SPDs. Based on the experimental results, an on-line diagnosis equipment for SPD was fabricated, which can measure the total leakage current, reference and clamping voltage. The leakage current measurement circuit was designed using a low-noise amplifier and a clamp type ZCT. A linear controller, the leakage current measurement part and a HVDC were used in the measurement of reference voltage. The measurement circuit of clamping voltage consisted of a surge generator and a coupling circuit. In a calibration process, measurement error of the prototype equipment was less than 3%.

CDMA방식의 PCS 전화기를 위한 새로운 방식의 고주파 전위회로에 관한 연구 (Novel RF front-end circuit for CDMA based PCS phone)

  • 윤기호;박한규
    • 한국통신학회논문지
    • /
    • 제23권6호
    • /
    • pp.1602-1609
    • /
    • 1998
  • 본 논문은 CDMA 방식의 PCS 전화기용 고주파 전위회로에 관한 것으로 전력증폭기와 듀플렉서를 결합하여 하나의 모듈로 구성하였다. 기존의 듀플렉서를 구성하고 있는 유전체 여파기들이 서로 분리되어 전력증폭기내에서 재배치되며 특히 송신용 대역저지여파기가 전력증폭기의 구동증폭기 이후에 위치된다. 결합모듈은 크기가 1.5CC에 불과하여 전화기 소형화에 크게 기여할 것으로 기대된다. 출력 24dBm에서 IS-95에 준하는 CDMA 선형특성을 만족하였으며 PCS 송수신 주파수대역에서 필요한 감쇠특성을 나타내어 듀플렉서로서 역할도 수행하였다. 결합모듈의 출력단자가 곧바로 안테나에 연결되므로 결합전보다 출력이 줄어들게 되어 이에 상응하는 동작전류가 줄어들었으며, CDMA 전화기가 실제 환경에서 동작시 출력크기의 대부분이 선형영역에 있는 점을 감안하여 전력증폭기의 동작점을 B급으로 제한하여 전류소모를 줄였다. 이 결과 약 95mA 의 드레인 전류를 절약할 수 있었다.

  • PDF

뉴런의 기능을 모사한 3×3배열구조의 디지털 회로에서의 오류위치 확인 및 복구 알고리즘 (An Error position detection and recovery algorithm at 3×3 matrix digital circuit by mimicking a Neuron)

  • 김석환
    • 한국정보통신학회논문지
    • /
    • 제20권11호
    • /
    • pp.2193-2198
    • /
    • 2016
  • 본 연구에서는 뉴런이 지니는 기능 및 결합구조를 모사하여 $3{\times}3$ 배열의 기능별로 분리시킨 후 디지털회로에서 동작 중 발생할 수 있는 일시적 또는 영구적인 오류 위치를 정확히 찾아내어 복구 시키는 알고리즘을 제안한다. 결합된 세포에서 어느 특정 일부분이 문제가 발생할 경우 그 기능을 다른 세포로 분화되어 동일 기능을 수행하며 오류가 발생한 세포는 주변 세포에 의해 사멸시키는 단계를 거친다. 이런 세포가 지니는 기능 및 구조를 디지털 회로내부에 기능 블록구조로 설계하여 알고리즘을 제안하였다. 본 연구에서 고려한 1번 블록의 4번 모듈이 오류가 발생했을 경우가로 방향에 대한 전체 모듈번호에 대한 합, 세로 방향에 대한 전체 모듈 번호 합, 대각선 방향에 대한 전체 모듈 번호의 합을 이용하여 쉽게 그 위치를 찾을 수 있었다.

제어 가능한 전송 영점을 이용한 광대역 차단 특성을 갖는 저역 통과 필터 (Low-Pass Filter with Wide Stop-Band Characteristics Using Controllable Transmission Zeros)

  • 이건천;김유선;김경근;이태성;나현식;임영석
    • 한국전자파학회논문지
    • /
    • 제18권8호
    • /
    • pp.887-894
    • /
    • 2007
  • 본 논문에서는 전기 결합 구조와 추가된 개방 스터브를 이용해 제이 가능한 4개의 전송 영점을 갖는 저역 통과 필터를 설계 및 제작하였다. 필터의 통과 대역은 GSM 대역이며, 전기 결합에 의해 WiBro 및 위성 DMB 대역에서 전송 영점이 각각 발생한다. 또한, 임의의 상측 주파수에서 개방 스터브에 의해 추가적인 2개의 전송 영점이 발생하는 구조이다. 적은 기생 성분을 갖는 준집중 소자를 이용해 필터를 구현함으로써 차단 대역의 고조파 성분을 억제하였다. 유한 전송 영점의 제어를 위한 등가 회로의 전기 결합 성분인 $C_M$은 필터 구조의 개방 스터브 간 간격 조절을 통해 구현하였다. 유전율 2.6인 테프론 기판을 사용하여 제작된 필터의 전체 크기는 급전선로를 포함하여 $38{\times}20{\times}0.79mm^3$이다. 측정된 3dB 차단 주파수는 1.55GHz이며, 전송 영점의 위치는 각각 2.20, 2.43, 4.11 및 6.84 GHz이다.

트랜지스터 광대역궤환증폭기 (Transistor Wide-Band Feedback Amplifiers)

  • 이병선;이상배
    • 대한전자공학회논문지
    • /
    • 제5권1호
    • /
    • pp.13-25
    • /
    • 1968
  • 고주파용 transistor를 이용한 광대역증폭기를 hybrid-π 등가회로를 이용하여 상세하게 분석하였다. 저주파와 고주파의 경우에 관한 해석을 하였고 이득과 대역폭및 입력 impedance와 출력 impedance를 주는 식을 유도하였다. 직렬궤환증폭기는 전압원으로 구동하여야하며 저저항부하로 동작시켜야 하고 병렬궤환증폭기는 전류원으로 구동하여야 하며 고저항부하로 동작시켜야 하는 것을 표시하였고 이 두가지 증폭단은 완충증폭단이나 변압기결합을 하지않고 결합시킬 수 있음을 표시하였다.

  • PDF

시험소 부분방전 측정시스템(ERA)의 소급성검토 (Review of the tracebility of ERA PD measuring system in test laboratory)

  • 허종철;강영식;김위영;오창수;박정후
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2004년도 하계학술대회 논문집 C
    • /
    • pp.1969-1971
    • /
    • 2004
  • For evaluation of partial discharge performances of electrical power appratus such as Insulator, circuit breaker and transformer and so on, Partial discharge measuring system(ERA) consisted of PD detector including amplifier, coupling capacitor, PD calibrator and voltage divider are used PD measuring system is very important factor which affect the test result and show reliability of test result in test laboratory, In this paper, we describe tracebility and uncertainty of PD measuring system in test laboratory based on IEC 60270.

  • PDF

스마트그리드 IED용 대역통과여파기 소형화를 위한 메타재질구조 설계법 연구 (Study on the Metamaterial Design Methodology to Reduce the Size of the Bandpass Filter for the Smart Grid IED)

  • 강승택;김형석
    • 전기학회논문지
    • /
    • 제60권12호
    • /
    • pp.2299-2304
    • /
    • 2011
  • In this paper, we propose the methodology to make the bandpass filters for the Smart Grid IED(Intelligent Electronic Device) smaller than the conventional bandpass filters. The size-reduction of the filters and the filter performances are indebted to devising small CRLH(composite right- and left-handed) resonators and coupling them as the metamaterial structures. The design methodology is validated by the equivalent circuit to be compared with the reliable full-wave EM simulation, and the proposed metamaterial filter outperforms the standard parallel-edge coupled filter with respect to the miniaturization and frequency response.

Basic RF Characteristics of Fishbone-Type Transmission Line Employing Comb-Type Ground Plane (FTLCGP) on PES Substrate for Use in Flexible Passive Circuits

  • Yun, Young;Jeong, Jang-Hyeon;Kim, Hong Seung;Jang, Nakwon
    • ETRI Journal
    • /
    • 제37권1호
    • /
    • pp.128-137
    • /
    • 2015
  • In this work, a fishbone-type transmission line employing a comb-type ground plane (FTLCGP) was fabricated on polyethersulfone (PES) substrate, and its RF characteristics were thoroughly investigated. According to the results, it was found that the FTLCGP on PES showed periodic capacitance values much higher than other types of transmission lines due to a coupling capacitance between the signal line and ground, which resulted in a reduction of wavelength and line width. Using the theoretical analysis, we also extracted the bandwidth characteristic of the FTLCGP on PES. According to the result, the FTLCGP structure showed a cut-off frequency of 280 GHz.

무전극램프의 출력전력 변화에 따른 새로운 모델링 기법 (New Modeling Method for an Electrodeless Fluorescent Lamp Using the Relation of Lamp Output Power and the Modeling Coefficients of the Lamp)

  • 임병노;장목순;신동석;박종연
    • 전기학회논문지
    • /
    • 제56권9호
    • /
    • pp.1626-1631
    • /
    • 2007
  • This paper presents a new modeling method using lamp output power and the modeling coefficients of the lamp. The proposed method utilizes the lamp modeling coefficients such as equivalent impedance Z(p), coupling coefficient of the transformer k(p), turns ratio of the transformer n(p), and plasma resistance Rp(p) as a function of lamp output power. The equivalent impedance Z(p) was developed from the equivalent resistance Req(p) and equivalent inductance Leq(p) of the lamp. Simulation and experimental results of the proposed model are presented in order to validate the proposed method. The modeling method can use to design an impedance matching circuit for a Class-D inverter.

λ/4 Hair-pin 공진기를 이용한 LTCC MLC 대역통과 여파기의 설계 (The Design of LTCC MLC Bandpass Filters using λ/4 Hair-pin Resonators)

  • 성규제;여동훈
    • 한국전자파학회논문지
    • /
    • 제14권1호
    • /
    • pp.14-19
    • /
    • 2003
  • 본 논문에서는 λ/4 hair-pin 공진기를 이용한 LTCC MLC 대역통과 여파기를 제안하였다. λ/4 hair-pin 공진기는 부분적인 평행 결합선로와 그 선폭이 동일한 전송선로로 구성되어, 등가적으로 SIR이 되므로 기존의 SIR과 달리 구조적인 불연속 없이 공진기의 크기를 소형화할 수 있다. 부가적인 용량성 결합을 포함한 λ/4 hair-pin 공진기를 이용한 LTCC MLC 대역통과 여파기의 등가회로를 유도하고, 설계 절차를 기술하였다 1.8 GHz대역에서 2단의 대역통과 여파기를 설계, 제작하였다.