• 대한토목학회논문집
• /
• 제14권4호
• /
• pp.977-988
• /
• 1994

본 연구는 연약지반상에 sand drain을 타설하고 성토하여 교대 및 교각을 시공하는 진월 인터체인지에서 기초지반의 침하, 융기 및 이미 시공된 교각기초부분의 수평방향 변위를 측정한 실측치와 Sekiguchi의 탄 점소성모델을 Biot의 압밀방정식과 결합하여 2차원 평면변형용조건으로 유한요소해석한 결과를 비교 검토하였다. 이때 교각기초인 강판말뚝은 등가의 강널말뚝벽으로 환산하였다. 그리고 환산한 벽체에 축력의 변화, 강성의 변화, 지지조건의 변화 및 고정점위치의 변화 동에 따른 기초지반의 거동과 강널말뚝벽체의 거동 특성을 밝혔다.

• Bulletin of the Korean Chemical Society
• /
• 제24권6호
• /
• pp.703-711
• /
• 2003

We have theoretically studied the nonadiabatic transitions among the five lower states with the Ω=$1_u$ symmetry ($1_u^{(1)} to 1_u^{(5)}$) in the photodissociation of Cl₂, Br₂, and I₂by using the spin-orbit configuration interaction (SOCI) method and the semiclassical time-dependent coupled Schrodinger equations. From the configuration analyses of the SOCI wavefunctions, we found that the nonadiabatic transition between $1_u^{(2)}$ and $1_u^{(1)}$ is a noncrossing type, while that between $1_u^{(3)}$ and $1_u^{(4)}$ is a crossing type for all the molecules. The behavior of the radial derivative coupling element between $1_u^{(1)}$ and $1_u^{(2)}$ and that between $1_u^{(3)}$ and $1_u^{(4)}$ is analyzed in detail. In Cl₂, nonadiabatic transitions can take place even between the states correlating to different dissociation limits, while in Br₂ and I₂, with the usual photon energies e.g. less than 20 eV, nonadiabatic transitions occur only between the states correlating to the same dissociation limits, reflecting the different magnitudes of the spin-orbit interactions.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 A
• /
• pp.62-64
• /
• 1996

Two current approaches for modeling the vector magnetic hysteretic process are the vector Preisach models and those models based on a system of noninteracting pseudo-particles. The pseudo-particles are intended to mimic the average behavior of real media particles. The simplest switching mechanisms of pseudoparticles is the Stoner-Wholfarth model. The Preisach models are quite precise in specifying the experimental input to the models. The vector properties of the Preisach models are, however, inadequate. This is partly because of the questionable assumptions used in coupling the various vector hysteresis components. Also these models do not include reversible magnetization changes. Unlike Preisach counterpart, the Stoner-Wholfarth model is inherently vector in nature. This is because spatial distribution and switching mechanisms are imposed on the system of pseudo-particles, so they come closer to representing the physical reality. The lack of interaction between pseudo-particles exclude the usefulness of the Stoner-Wholfarth model for small fields when the medium is traversing minor loops. The present work is an attempt at combining the advantages of above two models into one composite model, including the effect of particle interaction.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회
• /
• pp.515-518
• /
• 2010

Horizontal forces may form a major part of the loading system for structures supported on pile groups. It is known that during a strong earthquake, the dynamic behavior of a group-pile foundation is related not only to the inertial force coming from the superstructures but also to the deformation of the surrounding ground. Therefore, it is necessary to understand the behaviors of the group-pile foundations and superstructures during major earthquakes. In this paper, numerical simulation of real-scale group-pile foundation subjected to horizontal cyclic loading is conducted by using a program named as DBLEAVES. In the analysis, nonlinear behaviors of ground and piles are described by cyclic mobility model and axial force dependent model (AFD model). The purpose of this paper is to prove availability of the analysis method by comparing numerical results and test results.

• Tribology and Lubricants
• /
• 제26권1호
• /
• pp.31-36
• /
• 2010

The brake system is an important part of the automobile safety system. The disc brake system is divided into two parts: a rotating axi-symmetrical disc, and the stationary pads. The frictional heat, which is generated on the interface of the disc and pads, can cause high temperatures during the braking process. The frictional heat source (the pads) is moving on the disc and the location is time-dependent. Our study applies a moving heat source, which is defined by the time and space variable on the frictional surface, in order to simulate the frictional heat behavior accurately during the braking process. The object of the present work is the determination of the temperature distribution and thermal stress in the solid disc by non-axisymmetric 3D modeling for repeated braking.

• 조명전기설비학회논문지
• /
• 제29권3호
• /
• pp.81-87
• /
• 2015

In order to effectively protect electrical and electronic circuits which are extremely susceptible to lightning surges, multi-stage surge protection circuits are required. This paper presents the operational characteristics of the two-stage hybrid surge protection circuit in extra-low voltage DC power lines. The hybrid surge protective device consists of the gas discharge tube, transient voltage suppressor, and series inductor. The response characteristics of the proposed hybrid surge protective device to combination waves were investigated. As a result, the proposed two-stage surge protective device to combination wave provides the tight clamping level of less than 50V. The firing of the gas discharge tube to lightning surges depends on the de-coupling inductance and the rate-of-change of the current flowing through the transient voltage suppressor. The coordination between the upstream and downstream components of the hybrid surge protective device was satisfactorily achieved. The inductance of a de-coupler in surge protective circuits for low-voltage DC power lines, relative to a resistance, is sufficiently effective. The voltage drop and power loss due to the proposed surge protective device are ignored during normal operation of the systems.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.2166-2167
• /
• 2011

급격히 증가해온 사고전류로부터 전력망을 보호하기 위한 해결책으로 초전도 한류기가 제시되어 왔다. 초전도체의 영저항 특성을 이용한 초전도 한류기는 정상상태시 무손실로써 동작하기 때문에 전력 공급의 효율성을 저하시키지 않는 장점이 있다. 이러한 초전도 한류기를 전력망에 적용하기 위해서는, 용량증대의 문제가 우선적으로 해결되어야 하는 바, 초전도 소자의 직 병렬 연결과 더불어 변압기를 이용한 여러 타입의 초전도 한류기가 제시 및 연구되어 왔다. 본 논문에서는 변압기형 초전도 한류기와 자속결합형 초전도 한류기를 구성하여 단락사고 발생시 각 초전도 한류기의 회복성능을 비교 분석 하였다. 각 초전도 한류기는 사고전류 제한 동작특성에 따라 회복시간의 차이를 보였다.

• 한국전산유체공학회지
• /
• 제16권1호
• /
• pp.7-13
• /
• 2011

The fluid-structure interaction of a towed body is simulated using a developed code, which is based on the flux-difference splitting scheme on the hybrid Cartesian/immersed boundary method. To improve the stability in the coupling between the fluid and structure domains, a scheme is used, in which the effects of structure deformation are treated implicitly. The developed code is validated for the fluid-structure interaction problem through comparisons with other results on the vortex-induced vibration of elastically mounted cylinders. To simulate behavior of a towed body, an asymmetric tension modelling for a towing cable is suggested. In the suggested model, the tension is proportional to the elongation of the cable, but the cable has no effect on the body motion whenever the distance between the endpoints of the cable is smaller than the original length of the cable. The fluid-structure interactions of a towed body are simulated on the basis of different parameters of the towing cables. It is observed that the suggested tension model predicts the snapping for a shorter towing cable, which is in accordance with the reported results.

• 한국정밀공학회지
• /
• 제16권2호통권95호
• /
• pp.218-224
• /
• 1999

In the feed drive systems of machine tools that consist of many mechanical components such as motor, coupling, ballscrew, nut or table, a torsional vibration is often generated because of its elastic elements in torque transmission. Generally, the accuracy of motion control system is strongly influenced by the dynamic behavior of coupled transmission components. Especially, a torsional vibration caused by the elasticity of mechanical elements might deteriorate the quick movement of system and lead to shorten the life time of the mechanical transmission elements. So, it is necessary to analyze the electromechanical system mathematically to optimize the dynamic characteristics of the feed system. In this paper, the mathematical model of a feed drive system was developed and its mechanical characteristics were analyzed on the basis of the proposed model. The design concepts of speed control loop to stabilize a feed drive system were also proposed.

• 한국항공우주학회지
• /
• 제35권6호
• /
• pp.509-516
• /
• 2007

본 연구에서는 틸트로터 항공기의 날개-로터 시스템의 수학적 모델링과 자유진동 제어에 대하여 고찰하였다. 날개에 부착된 로터는 수직방향에서 수평방향으로 또는 그 반대로 틸팅각을 변경시킬 수 있다. 로터의 틸팅각, 복합재료 날개의 섬유각, 로터의 회전속도를 변수로 하여 자유진동 특성 및 압전재료를 이용한 자유진동 제어 효과에 대하여 고찰하였다. 복합재료 날개는 상자형 박판 보로 모델링 하였으며, 플랩-래그운동 사이의 연성과 인장-비틀림 운동사이의 연성이 발생하는 CUS 구조로 가정하였다. 수치해석 결과와 그에 따른 결론을 도출하였다.