• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.5A
• /
• pp.674-681
• /
• 2000

We proposed polymer based vertical asymmetric optical coupler. And we optimized the proposed device by coupling characteristic analysis In 1.33um wavelength, TE mode, we obtained very short coupling length(L=277.6um), high coupling efficiency(94%). The merits of proposed device are low propagation loss due to very short full device, low production cost and time, and high integrated fabrication. We will use this to fabricate optical switch, modulator and tunable WDM devices, etc.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.55 no.4
• /
• pp.189-198
• /
• 2006

In order to improve the reliability of stator windings for hydro generators, it is necessary to detect the defective point and life assessment of the high voltage windings. Especially the on-line partial discharge (PD) test provides the ability to monitor effects, such as slot discharge, internal discharge, and end-winding discharge without interrupting generators, this method has been proven the major testing technology in high voltage rotating machines nowadays. The purpose of this paper is to describe the method of the on-line PD measurement on stator windings for hydro-generator with 13 [kV] class ceramic coupler (CC), on-line PD measuring system, terminal box, and index parameters. Also, the developed PD measuring system and 13 [kV] class CC were installed Daechung-dam generator #2. It was found that this installed sensor and system had good electrical characteristics to detect PD activity during the operating condition with its detection frequency band is between several and several tens MHz.

• Proceedings of the KIEE Conference
• /
• 2002.07c
• /
• pp.1674-1676
• /
• 2002

In this paper, High Frequency PD measuring system using directional coupler sensors(DCS) is introduced. Especially the principles of the DCS and characteristics of the system are introduced. Evaluation of this system was carried by an adoption to the test circuit of 345kV XLPE $2000mm^2$ cable and EB-A, EB-G, PIJ, PNJ. In the test a PD measurement was carried out without shieldroom and under the on-line state and in the high frequency range at the remote site from the test object. The test result was satisfactory and this is due to the use of DCS and using a high frequency range and specific filter for radio and TV signal and low pass. This system can be used to the test of a new construction of cable and accessories and measuring of long-term deterioration of cable and accessories. And this will bring us the reliability of a power transmission.

• Journal of the Korea Concrete Institute
• /
• v.11 no.6
• /
• pp.113-119
• /
• 1999

Fatigue failure is a phenomenon such that structures under cyclic service load is failed by sudden brittle manner. Therefore, in order to obtain structures safety against the fatigue failure during their service lifes, fatigue characteristics should be considered for design and analysis of the structures. As stress range of prestressed (PS) tendons, which governs fatigus characteristic of prestressed concrete (PSC) structures, increases with increased use of partial prestressig, it is more necessary to consider fatigue characteristics of PS tendons. In this paper, direct-tension fatigue experiments with special specimen-setting devices are carried out to obtain fatigue characteristics of domestic low relaxation PS strands having different diameters and PS strands connected with coupler. Then, allowable stress range of fatigue for PSC beams using low relaxation strands are presented for the fatigue examination of prestressed concrete beams applied cyclic loading.

• Proceedings of the IEEK Conference
• /
• 2002.07a
• /
• pp.508-511
• /
• 2002

By defining a power distribution ratio (PDR) and coupling efficiency (CE) amenable to the rigorous analytical solutions of newly developed rigorous modal transmission-line theory (MTLT), we explicitly analyze the power coupling characteristics of TE modes propagating in GADCs. The numerical results reveal that the incident power is optimally coupled into the desired guiding channel if the powers of rigorous modes excited at the input boundary of grating-assisted coupler are equally partitioned.

• Journal of Biomedical Engineering Research
• /
• v.9 no.2
• /
• pp.179-184
• /
• 1988

In this study, we improve the performance of telemetry ECG modem using acoustic coupler. The results are as follows : (1) General active filter is replaced by SCF(switched capaciror filter) improving the LPF and BPF characteristics. (2) ECG Pre-amplifier is installed in ECG modem. (3) The interface circuit is designed to store the ECG waveform in casette recorder.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.23 no.6
• /
• pp.833-839
• /
• 1986

This paper describes the development of a new type of an integrated optical filter using the frequency characteristics of a directly-connected directional coupler with a Rib waveguide. It has been designed for multiplexing and demultiplexing light froups in different wavelength regions. Also, the effects of higher modes, couplings between input waveguides or output waveguides, and dispersion of material are considered.

• Proceedings of the Optical Society of Korea Conference
• /
• 2007.07a
• /
• pp.353-354
• /
• 2007

• Proceedings of the Optical Society of Korea Conference
• /
• 2001.02a
• /
• pp.216-217
• /
• 2001

광섬유와 평면 도파로를 결합한 도파로 구조에서 광 결합 현상은 다양한 응용 가능성 때문에 이론적으로 또는 실험적으로 많은 연구가 되어오고 있다. 광섬유는 단일모드를 이용하고 적당한 곡률이 주어진 블록에 고정한 후 연마하여 클래딩의 일부를 제거하고, 그 상부에 다중모드 평면 도파로(Multi-Mode Overlay Waveguide; MMOW)를 구성한다. 제작된 결합기 구조에서 평면 도파로는 광섬유의 감쇠장 결합(Evanescent field coupling)을 유도하게 되므로, 소자의 특성은 평면 도파로의 구조와 조건에 의해 결정된다. (중략)

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.07a
• /
• pp.218-219
• /
• 2003

광결합 현상은 근접한 도파로에서 발생하며 각 도파로의 에너지를 다른 도파로로 전이시킨다. 이러한 특성은 광스위치, 광변조기, 광필터 및 광결합／분리기에 널리 사용된다. 이중에서 많이 사용되는 소자중 하나가 방향성 결합기이며 크게 입력부, 접근부, 결합부로 나눌 수 있다. 이때 광결합 현상은 결합부뿐만 아니라 접근부에서도 발생하기 때문에 소멸비는 나빠지게 된다. 본 논문에서는 접근부의 입사각에 따른 소멸비 변화와 이에 대한 조건을 분석하였다. (중략)