• Fibers and Polymers
• /
• v.5 no.4
• /
• pp.303-308
• /
• 2004

A natural colorant was extracted from Cassia tara L. using buffer solutions (pH: 2-11) as extractants. The dyeing solution (Cassia tara L. extract) extracted using pH 9 buffer solution was found to give the highest K/S values of dyed fabrics. Cotton and silk fabrics were dyed with Cassia tara L. extract at $60^{\circ}C$ for 60 min with pre-treatment of various metal salts as mordants. It was found that Cassia tara L. extract was polygenetic dyestuffs and its major components were anthraquinones. Studies have been made on the effects of the kind of mordant on dyeing properties and colour fastnesses of cotton and silk fabrics. The K/S of cotton fabrics increased in the order of the dyeing using $FeSO_4 >CuSO_4> ZnSO_4> MnSO_4\cong Al_2(SO_4)_3 > NiSo_4 > none$, however, the K/S of silk fabrics increased in the order of the dyeing using $FeSO_4 > CuSO_4 > ZnSO_4\cong Al_2(SO_4)_3 > MnSO_4\cong NiSO_4 > none$. It was found that the K/S values of dyed fabrics were largely affected by the colour difference $(\DeltaE)$ between mordanted fabric and control fabric. However, they were not depended on the content of mordanted metal ion of the fabrics. Mordants $FeSO_4$ and CuSO_4$ for cotton fabric, $FeSO_4,\; CuSO_4,\; and\; Al_2(S0_4)_3$ for silk fabric were found to give good light fastness (rating 4).

• The Research Journal of the Costume Culture
• /
• v.24 no.6
• /
• pp.777-787
• /
• 2016

This study was carried out in order to provide useful data for planning fabrics of summer eco-friendly fashion products. The fabrics used in this study were four cellulose fibers: cotton, cotton/mulberry blended, flax, and flax/lyocell blended. Dyeing with natural indigo was carried out under three different reducing conditions (i.e., general, eclectic, and eco-friendly) that have different reducing agent and pH levels, and hydrosulfite and glucose were used as a reducing agent. The dye uptake (K/S value) of fabrics dyed with natural indigo by a reducing condition was the highest at 660nm. Regardless of the fabrics, dye uptake was the highest under the general reducing condition and the lowest under the eco-friendly reducing condition. Under different reducing conditions, the dye uptake of natural indigo fabrics with the maximum absorption wavelength indicated a difference. The colorfastness of cellulose fabrics that were dyed with natural indigo had a rate of 4 to 5 except for rubbing fastness, which indicated good colorfastness. Additionally, natural indigo-dyed cotton and flax fabrics had good antibiosis. When the color characteristics of fabrics dyed with natural indigo were measured, all of the three reducing conditions created purple blue (PB) colors, and the color characteristics of dyed fabrics by reducing condition and fabric showed significant differences.

• Proceedings of the KIEE Conference
• /
• 2005.11a
• /
• pp.103-105
• /
• 2005

The importance of protecting people from harsh weather conditions cannot be over-emphasized and the way to. do so should be sought vigorously. The most well known and widely used weather protection fabric in the current industry is $Gor-Tex.^1$ However, the Gore-Tex membrane cannot be attached to cotton or other natural fibers so it's use is not suitable for clothing such as underwear. If the exterior of cotton fabric can be made to be hydrophobic without sacrificing the comfort and breathability, the result will be a cotton fabric with the weather protection capability equivalent to Gore-Tex as well as the ability to provide the best wear comfort. However, this should be done without using toxic and expensive gases to be environmentally friendly and cost effective. Therefore, our approach for hydrophobic treatments of fabric and metal surfaces is to utilize a plasma-based technique. In general, plasma processes do not produce chemical wastes or waste disposal problems and they are fully automated.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.7
• /
• pp.1056-1064
• /
• 2008

Toes socks are used widely for the health of feet. However, discomfort is one of the major complains from toes socks users. The purpose of this study is to determine the effect of functional fibers on the physiological response and wearing sensation of toes socks. For experiment, two different toes socks with cotton/warm fiber(WS) and cotton/chitosan fiber(CS) were knitted automatically by a computer controlled flat knitting machine. The control toes socks with cotton/nylon/polyurethan(TS) were prepared to compare the properties. Experiments were conducted in a climate room of $16\pm2^{\circ}C$, $50\pm5%$ R.H. The results of this study were as follows. The change of heart rate, pulse rate, and mean skin temperature showed no difference among three different socks. However, skin temperature of TS was evaluated higher than that of WS and CS. After exercise wearing WS both instep temperature and sole temperature of women tend to higher compared to men. Wet sensation and overall comfort sensation of toes socks were significantly influenced by different fiber contents. Subjects evaluated WS and CS more comfortable than TS.

• Journal of Adhesion and Interface
• /
• v.9 no.4
• /
• pp.24-29
• /
• 2008

Polypropylene-natural fiber composites have been prepared and their rheological properties during mixing and thermal properties were investigated. Two types of natural fibers (cotton fiber and wood fiber) were compared. On increasing fiber contents, the torque values of composites were increased, where the cotton fiber exhibited higher increase in torques. The torque values of composites were higher as the MI of PP decreased. X-ray diffraction and differential scanning calorimetry results showed an increase in the crystallization temperature but a decrease of crystallinity of the PP/natural fiber composites on increasing fiber contents.

• Journal of the Korea Furniture Society
• /
• v.20 no.1
• /
• pp.95-104
• /
• 2009

The study was carried out to analyze wood quality of coffin board, the wood species of coffin excavated in Youngdong, Korea. All coffin woods were identified as hard pines, Korean red pine(Pinus densiflora S. & Z.). According to wood quality of coffins, inner coffins of Bae Cheon-Jo and his wife showed similarity and dissimilarity comparing with several literatures. The similarity was in the structure of panels, bottom lining board and charcoal layer, and the dissimilarity was in jointing. From the analysis of fibrous materials attached to coffin woods, the paper mulberry and cotton fibers were identified. In the inner coffin of Bae Cheon-Jo, tool traces by handle planer were observed.

• Textile Coloration and Finishing
• /
• v.13 no.5
• /
• pp.306-311
• /
• 2001

Natural colorants haute attracted much attention all over the world because of their non-hazardous nature. The world is becoming increasingly aware of environmental Issues, such as ozone layer depletion, water pollution and waste disposal problems. The use of synthetic dyestuffs for their synthesis and application in the dyeing industries has been criticized due to introduction of contaminants into the environment. This has led to the desire to turn to the traditional, and more natural way of life. In this study, the colorants of extract of Ginkgo biloba bark were analysed and their dyeing properties on silk, wool and cotton were studied. It was found that uv-visible absorption spectra of extract of Ginkgo biloba bark showed two strong absorption Peaks in the range of 240 ∼400 In. From the result of IR spectra, the major ingredient of extract of Gikgo biloba bark seems to be the flavon which is one of the flavonoid derivatives. Silk, wool, and cotton dyed with the extract of Ginkgo biloba bark showed a reddish yellow color. Their color differences were increased drastically with repetition of dyeing by three times.

• Textile Coloration and Finishing
• /
• v.20 no.5
• /
• pp.1-6
• /
• 2008

3-(Hydroxyphenyl phosphinyl) propanoic acid (HPPA) has been one of the most commonly used durable flame retardant agents for polyethylene terephthalate (PET) for many years. We intended to explore the application of HPPA to cellulose fabrics as formaldehyde-free phosphorus based flame retardants (FRs) through green chemistry process. The flame retardancy of the flame-retardant treated cellulose fabrics were characterized by using inductively coupled plasma spectroscopy (ICP) and limiting oxygen index (LOI). Structural changes of the treated cellulose fabrics were carried out by thermogravimetric analysis (TGA) and Fourier transform infrared (FT-IR) spectroscopy. To enhance the flame retardancy of HPPA treated cellulose fibers, glycerol polyglycidyl ether (GPE), a crosslinking agent was employed. Both HPPA and GPE treated cotton fabric imparted an LOI value over 26.

• Fibers and Polymers
• /
• v.5 no.1
• /
• pp.6-11
• /
• 2004

The purpose of this study is to analyze the subjective fabric hand of sleepwear fabrics, and to assist in developing sleepwear fabrics that offer maximum comfort in wearing sensation. In general, the respondents noted that sleepwear fabrics made with polyester had better tactile sensation than those made with cotton, while satin weave fabrics felt better than plain weave fabrics. As regards the difference in fabric hand according to gender, female students responded with more receptiveness and sensitivity than male students in the category of woven fabric evaluation. As regards the same textile materials, the evaluations of female students and male students differed in fabric hand descriptors, particularly for the evaluation on cotton fabrics. Male students responded that both plain weave fabrics and satin weave fabrics were stiff while female students replied that satin weave fabrics had better tactile sensation.

• Fibers and Polymers
• /
• v.5 no.3
• /
• pp.230-233
• /
• 2004

The optimum conditions for durable press treatment of cotton fabrics using glyoxal as a nonformaldehyde crosslinking agent were investigated. Crosslinking reaction was conducted in the presence of different catalysts such as aluminum sulfate, magnesium chloride, or magnesium chloride-citric acid mixture at various mole ratios of catalyst to glyoxal. Aluminum sulfate was proven the most effective one among those used. Glycol addition into a glyoxal padding bath increased the wrinkle recovery angle(WRA) and whiteness of treated fabrics. The optimum mole ratio of glycol to glyoxal was 1:1. Diethylene glycol addition produced better overall performance to the glyoxal-crosslinked fabric compared to ethylene glycol addition.