• Steel and Composite Structures
• /
• v.29 no.2
• /
• pp.175-186
• /
• 2018

The plastic hinge method and the plastic zone method are extensively adopted in displacement-based elements and force-based elements respectively for second-order inelastic analysis. The former enhances the computational efficiency with relatively less accurate results while the latter precisely predicts the structural behavior but generally requires more computer time. The displacement-based elements receive criticism mainly on plasticity dominated problems not only in accuracy but also in longer computer time to redistribute the forces due to formation of plastic hinges. The multi-element-per-member model relieves this problem to some extent but will induce a new problem in modeling of member initial imperfections required in design codes for direct analysis. On the contrary, a force-based element with several integration points is sufficient for material yielding. However, use of more integration points or elements associated with fiber section reduces computational efficiency. In this paper, a new force-based element equipped with stress-resultant plasticity model with minimal computational cost is proposed for second-order inelastic analysis. This element is able to take the member initial bowing into account such that one-element-per-member model is adequate and complied with the codified requirements of direct analysis. This innovative solution is new and practical for routine design. Finally, several examples demonstrate the validity and accuracy of the proposed method.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.12
• /
• pp.6163-6168
• /
• 2012

Although much health services research has been conducted using national health insurance claims data in Korea, the validity of this method has not been ascertained. The objective of this study was to validate the use of claims data for health services research by comparing incidence rate of cancers found using insurance claims data against rates of the national cancer registry of Korea. An algorithm to estimate incidence rates using claims data was developed and applied. The claims data from 2005-2008 were acquired and the patients admitted to hospitals due to cancer in 2008 without admission to hospital from 2005-2007 by the same diagnosis code were regarded as incident cases. The acquired results were compared with the values from the National Cancer Registry of Korea. The incidence rate of all cancers found using claims data was 363.1 per 100,000 people, which is very similar to the 361.9 per 100,000 rate of the national cancer registry. Also the age-, gender- and disease-specific rates between the two data sources were similar. Therefore, national health insurance claims data may be a worthwhile resource for health services research if appropriate algorithms are applied, especially considering the cost effectiveness of this method.

• Journal of the Korean Society of Food Culture
• /
• v.15 no.3
• /
• pp.175-188
• /
• 2000

This study was to investigate the consumption pattern, behaviors, and motivational attitudes related to fruit and vegetables. Data were collected from 344 mothers whose children were attending an elementary school and a middle school in Kimcheon. The average vegetable expenses were under 10,000 won per week. The frequency of purchasing vegetables was 2-3 times a week. Housewives usually bought the vegetables at local markets and grand shopping centers. As for buying vegetables, housewives considered the organic vegetables, preference, price, and nutrition in order. In the family, the vegetables were favored by husbands most and by sons least. The average fruit expenses were under 10,000 won per week. The frequency of purchasing fruit was 2-3 times a week. Housewives usually bought the fruit at local markets and grand shopping centers. As for buying fruit, housewives considered preference, price, and nutrition in order. The fruit were favored by all members most and by husbands least. Housewives identified barriers to increasing vegetables and fruit consumption, including preference for other foods, lack of availability, cost, and time and effort to prepare. Several implications for nutrition interventions were suggested. First, a key motivation for these women was eating healthy food when they are pregnant, suggesting a persuasive appeal to use in interventions. Second, review of the women's current behaviors led to an identification of four specific behaviors that had the most potential for increasing overall consumption. Finally, the findings suggested ways in which nutrition interventions could address each of the barriers identified.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.1
• /
• pp.13-20
• /
• 2022

Aircraft weight is an important factor affecting performance and fuel efficiency. In the conceptual design stage of the aircraft, the process of balancing cost and weight is performed using empirical formulas such as fuel consumption cost per weight in estimating element weight. In addition, when an airline operates an aircraft, it promotes fuel efficiency improvement, fuel saving and carbon reduction through weight management activities. The relationship between changes in aircraft weight and changes in fuel consumption is called the cost of weight, and the cost of weight is used to evaluate the effect of adding or reducing weight to an aircraft on fuel consumption. In this study, the problems of the existing cost of weight calculation method are identified, and a new cost of weight calculation method is introduced to solve the problem. Using Breguet's Range Formula and actual flight data of the A350-900 aircraft, two weight costs are calculated based on take-off weight and landing weight. In conclusion, it was suggested that it is reasonable to use the cost of weight based on the take-off weight and the landing weight for other purposes. In particular, the cost of weight based on the landing weight can be used as an empirical formula for estimating element weight and optimizing cost and weight in the conceptual design stage of similar aircraft.

• Asian-Australasian Journal of Animal Sciences
• /
• v.6 no.3
• /
• pp.361-365
• /
• 1993

An experiment was conducted to investigate the effects of feeding fresh cassava roots on the performance and carcass quality of pigs raised from $15{\pm}1kg$ to 85 kg live weight. Fresh unpeeled cassava roots were chopped into chips and offered separately along with a protein concentrate made up of copra cake and meat and bone meal, and a local mineral-vitamin premix. Commercial pig grower and finisher diets served as control. A total of 24 pigs were used in an incomplete randomized split-plot design experiment. Pigs fed fresh cassava-based diet grew as fast, 0.78 vs 0.77 kg/day, and were as efficient, 3.74 vs 3.77 in converting feed into body weight gain as those fed the commercial control diet. Similarly, there were no differences in carcass quality measured in terms of dressing percentage, 77 vs 77; backfat thickness, 2.76 vs 2.78 cm; loin eye muscle area, 29.2 vs $29.1cm^2$ and in the relative proportions of the different carcass cuts between the two dietary treatments. The use of fresh cassava along with the protein and the local mineral-vitamin premix however, resulted in lowered total feed cost and cost per unit of live weight gain. It is concluded that fresh cassava roots can be fed along with copra cake, meat and bone meal protein concentrate and a local mineral-vitamin premix to fattening pigs with no adverse affects on performance and carcass quality.

• Journal of the Korea Institute of Building Construction
• /
• v.13 no.5
• /
• pp.506-512
• /
• 2013

Since the amendment of the law on the private sector investment in social infrastructure in January of 2005, the government has been actively promoting Build-Transfer-Lease (BTL) projects. Notably, most new educational facilities have been built as BTL projects. For these facilities, the unit cost per unit area has been applied to predict construction costs. However, since construction costs are mostly managed after the detailed design phase, the costs can be estimated incorrectly. For this reason, cost management is needed in the planning phase, with a sound approximate estimate to prevent the wasteful use of funds. To address this shortcoming, this study aims to develop a quantity prediction model for education facilities using regression analysis in the planning phase. The developed model is focused on the required quantities of reinforced concrete and bricks. In order to achieve the objective, the data of 44 educational facility projects collected from Gyeonggi-do was used in the regression model. This study can be utilized by major stakeholders to accurately predict construction costs by estimating the appropriate quantities of reinforced concrete and bricks in the planning design phase.

• Journal of information and communication convergence engineering
• /
• v.18 no.1
• /
• pp.1-7
• /
• 2020

This paper proposes a fast-processing and low-cost hardware multiple input multiple output (MIMO) channel emulator. The channel emulator is an important component of hardware-based simulation systems. The novelty of this work is the use of sharing and pipelining functions to reduce hardware resource utilization while maintaining a high sample rate. In our proposed emulator, the samples are created sequentially and interpolated to ensure the sample rate is equal to the base band rate. The proposed 4 × 4 MIMO requires low-cost hardware resource so that it can be implemented on a single field-programmable gate array (FPGA) chip. An implementation on Xilinx Virtex-7 VX980T was found to occupy 10.47% of the available configurable slice registers and 12.58% of the FPGA's slice lookup tables. The maximum frequency of the proposed emulator is 758.064 MHz, so up to 560 different paths can be processed simultaneously to generate 560 × 758 million × 2 × 32 bit complex-valued fading samples per second.

• Quality Improvement in Health Care
• /
• v.15 no.2
• /
• pp.121-130
• /
• 2009

Objectives : To evaluate the effect of heath examination program which introduce web-based input system, OCS(Order communicating system) and interface with national health insurance corporation, this study was done. Method : To Exam/Order and tests separately at anytime, the experimental health examination program which had web-based questionnaire input system, on-line measurement input system, interface program with national health insurance corporation and introduced OCS was developed. Experiment and old examination program were compared in terms of satisfaction and cost. Result : The 95.7% of respondents were satisfied with web-based input system, the 95.4% satisfied with OCS use, and 97.8% satisfied with test at anytime they want. The cost and time reduction between experiment and old program were 4,159,000won and $600.3{\pm}5.75$(seconds) per man input-time. Conclusion : The experimental health examination program is good for employee and hospital. If the health examination program for non-employee will be developed, it will be done efficiently and effectively, but Internet securities will be considered.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.2
• /
• pp.275-282
• /
• 2015

Since a NAND-flash memory is able to keep data during electricity-off and has small cost to store data per bytes, it is widely used on hand-held devices. It is necessary to use an index in order to process mass data effectively on the flash memory. However, since the flash memory requires high cost for a write operation and does not support an overwrite operation, it is possible to reduce the performance of the index when the disk based index is exploited. In this paper, we implement the fixed grid file index and evaluate the performance of the index on various conditions. To do this, we measure the average processing time by the ratio of query operations and update operations. We also the compare the processing times of the flash memory with those of the magnetic disk.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.22 no.1
• /
• pp.1-16
• /
• 1994

This paper examines the individual and social values of tour and recreation activities related to the characteristics and attractions of parks in urban area through a questionnaire. The data for this research consists of 2,942 samples based on interviews in sixteen parks in Daegu area. Implications of the findings for urban parks design and tour and recreation policy are discussed. Travel cost method and contingent valuation method are applied essentially. These methods yield a reasonable estimation of the relationship between tour and recreation values of the parks and the visit rate which can be used to estimate demand functions for tour and recreation experiences provided by a site. Semilog-type models can be used to estimate the use of the park. Finally, the tour and recreation value of each park per user-day is estimated by the total experiences of the users. This study is a modest but important step in the investigation of urban parks and recreation site demand and values. Many of the developments in contingent valuation method and travel cost modeling should now be applied to the urban scale parks and recreation sits. Such studies will contribute significantly to the improvement of methodology for tour and recreation values measuring, especially to individual and social benefits for the urban parks, and provide the much needed guidance for the allocation of scarce tour and recreation resources.